Configure the name of PX_TXN and PS_TXN_SEQ

Similar Questions

• When I connect the computer says there is not a configuration, the name or serial number

  I have a HP Pavilion dv7-3165dx Entertainment Notebook PC, running Windows 7. When I log in, it says that he does not know the configuration, the name or serial number. It also doesn't let me back up my files.

  What should I do to let him remember who he is?

  I work out of my house and use it daily. It allows me to open a session by bypassing the initial screen.

  Thank you

  Margin

  Hi Jackson,.

  Looks like you need to restore.  Have a look here and follow the steps and please let me know if this helps.

• How the names of variables and units used in the binary output file

  My colleague will give me LabView generated from the binary files (*.dat). There are more than 60 variables (columns) in the binary output file. I need to know the names of variables and units, which I think he has already configured in LabView. Is there a way for him to produce a file that contains the name of the variable and unity, so that I'll know what contains the binary file? It can create an equivalent ASCII file with a header indicating the name of the variable, but it does not list the units of each variable.

  As you can tell I'm not a user of LabView, so I apologize if this question makes no sense.

  Hi KE,.

  an ASCII (probably the csv format) file is just text - and contains all data (intentially) written to. There is no special function to include units or whatever!

  Your colleague must save the information it records the names and values in the same way...

  (When writing to text files, it could use WriteTextFile, FormatIntoFile, WriteToSpreadsheetFile, WriteBinaryFile even could serve...)

• Can I globally change the names of files and or directory to lowercase to uppercase?

  in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

  A single configuration change probably will not accomplish this.

  Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

  Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

  HTH,
  JW

• I forgot the name of user and password and my email has been deleted! Help!

  Hello! I have a Skype account with an email, I used to have (it's been deleted) and I can not find the user name and password. Skype account is still active by the way, I just can't log in cause I don't have the name of user and password. Is there any other way (except mail) to discover the password/user name?

  Whitout access to registered e-mail, I guess calling the service the customer is your only option, however, if you don't remember the user name or any other information that you can link to the account, retrieve the account may be difficult. If you already use Skype, a computer, you have access to, the %appdata%\skype folder contains a folder with the same name as your username (and all the others who have used the same computer logged in as that user).

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service?FromPage=search&fro...

• I have a creative Member Cloud (one year). As you know, when I download/install delegating creation software, ask the name of user and password. I typed the name of user and password, but it was rejected. Is the user name is the same as Adobe ID? Please a

  I have a creative Member Cloud (one year). As you know, when I download/install software of Creative delegating, askUsername and password. I typed the name of user and password, but it was rejected. Is the user name is the same as Adobe ID? Please advise me.

  Hello

  He would ask your Machine user name and password.

  Kind regards

  Sheena

• How can I change the name of 'folio' and the ' name of the publication?

  Hello

  We have published a multi-folio application a unique folio in it.

  We would like to change the name of 'folio' and "the name of the publication" and we tried to do by using the dashboard. However, when clicking on "update" we box unchecked the "update content", because there is no change to the content of the folio. The problem is that this did not change anything in the application: the 'folio name' and "the name of the publication" remain the same...

  Is it possible to do without having to republish this folio?

  Thank you!

  Olivier.

  Metadata are considered as part of the content. Click Update again and leave the box "update content" checked.

  Neil

• Install FlashPlayer does not accept the name of user and password

  Trying to install Flash Player on my Mac.  The Adobe site recognize my user name (email) and password.  But when it comes time to install Flash Player and he asked name of user and password, the box just vibrates.  Why the name of user and password work on the site, but did not accept that for the actual installation?

  Hi adasil,

  If you get the password as mentioned below screen window, then it's the username and password for your MAC computer not Adobe. Also, as PAT said, Flash player is not necessary any Adobe ID or password.

  

  If the user name and password don't work then you should contact Mac

  Thank you

  Nikhil Gupta.

• rejecting the name of user and password in the configuration of the Regional on Pre service

  I have a new meadow and when I go to set up the device with my Exchange provider, I get a message saying that the user name and password is not correct when I click SignIn.  I have confirmed all the settings and typed the password several times.  Same information identification and parameters of working on several other devices (other Palm device, computer laptop, etc.), but not on this unit.  I called my Exchange hosting provider and they said that they got a few other calls from people with the same problem with the Pre and were not able to make it work.

  Is there something specific in the user name and password that the pre is looking for (different from any other device that I use that works very well)?

  Thank you.

  The exact message is: error your user name or password is not correct.

  (I checked so doule that I don't have not misspelled the name of user or password, this same info works on other devices, and my host Exchange could not get another pre to connect also)

  Message relates to: Pre (Sprint)

  Message edited by DCS2421 on 06/06/2009 17:47

  Finally managed to do work.  I worked with someone at the home Exchange and found a permutation of user name that worked.  Something like this: Domain.Username (username but different name than what works with all other customer/devices that we/they used - weird).

• screensharingd does not accept the name of user and password

  Hello

  We have a mac mini which does not accept my credentials via screen sharing. I activated the remote access connection & remote management and set the password for VNC ("viewers VNC may control screen with password") to the same as my username "geertl".

  When I try to connect from another mac mini or an Ubuntu (with customer Remmina) system I always get the following error (system.log):

  7 June 18:01:01 screensharingd mac [2277]: authentication: FAILED: username: geertl: Viewer address: x.x.x.x: Type: DH

  VNC access is fine (with for example of TightVNC viewer):

  7 June 18:01:36 mac screensharingd [2282]: authentication: MANAGED: user name: N/A: Viewer address: x.x.x.x: Type: VNC WITH

  In this window VNC then enter my password and login without problem. SSH also works without problem from a Linux machine:

  ~ # ssh mac-l geertl sw_vers - productVersion

  Password:

  10.11.5

  It's just the screensharing who does not accept my password and/or username. Mac has been restarted, all reconfigured screensharing two through GUI as CLI, 'Account name' and 'Real name' were aligned and put different, none of them work. The firewall is disabled.

  We have another mac that is configured in the same way (same user name, same network,...) where the screen sharing works fine.

  Any pointer very appreciated!

  I had the same problem recently following a power failure.

  What I did to recover was to ensure that my Mac Mini was up and running - visible in the side bar of the finder.

  Then power rolled (stop) OSX on iMac and rebooted.

  Connections has then worked as expected.

  I would add, that my iMac and Mac Mini are running 10.11.5; and Yes, the problem only screen sharing.

• I was wondering about an app that I had on a previous PC located in the 'Tools' menu, I'm going to submit inquiries about Firefox, my question is: what is the name of it and how do I add to the Firefox I have on my new PC?

  I had this about 2 weeks ago, but don't remember how I got it, it came with the download of 7.0 I think.

  The name of it is test pilot.

  For more information and download

  https://TestPilot.mozillalabs.com/

• User name and password stored incorrectly. I removed any saved passwords. How can I get Firefox to ask again to remember the name of user and password. Thank you.

  My user name and password have been correctly entered but saved correctly (not the first time). I removed any saved passwords. How can I get Firefox prompt again to offer save the name of username/password or is at - it another way to enter these details? Thank you.

  Check exceptions: Tools > Options > Security: passwords: Exceptions
  ---
  http://KB.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
  http://KB.mozillazine.org/Password_Manage

• [NMH300] Try to use Vista backup, but what is the name of user and password to drive Z?

  I use the pole NMH300 media and I want to create a backup process this file copies on drive Z (media Division) and Vista backup invites me for the username and password for the drive Z, which is funny because I never enter a username or password to access this disk , and the more I use a password only to access the media hub File Explorer but I've never had to enter a user name.  What Miss me?

  Thanks in advance.

  Joey

  The utility of backup Vista encrypts the data on the hard drive using the security feature of NTFS format and I think it will not be able to do that if you go back up to the mediahub since its already a different device with a different file for its Reader format. Vista Backup utility is intended only then to NTFS formatted disks so that it can encrypt/secure data being saved. Just use the NTI Shadow backup tool to backup your files, it's a good tool.

  Backup NTI Shadow

  See you soon.

• Change the name of files and folders in data warehouses

  Is it safe while a virtual machine is running to change the name of the VMDK files and folders in a data store?

  I discovered that a VMS VMDK files have a different name for the virtual machine itself, then someone changed the name of the virtual machine after you have created the records

  I had to do it a few times, will try to document the process that I follow.  If you have many warehouses of data, then make a note of what data store, the machine is in.  The next step is to unregister the virtual machine from vCenter / ESXi

  Then, you need to enable SSH on your ESXi host

  Use Putty or something similar for you connect to the ESXi host

  Run the following commands (in italics)

  cd vmfs/volumes / that is, if the data store that contains the virtual computer is named datastore1 then you would run cd/vmfs/volumes/datastore1

  Then run ls to verify that the virtual machine file is here

  Rename the folder by using mv

  Change to the folder with cd

  Rename the nvram, vmsd, vmx and running again is to say the mv

  MV oldname.nvram newname.nvram

  MV oldname.vmsd newname.vmsd

  MV oldname.vmx newname.vmx
  

  MV 1234.hlog - oldname newname - 1234.hlog

  Rename the vmdk with vmkfstools EI oldname.vmdk newname.vmdk

  Edit the vmx with vi newname.vmx

  Replace references to oldname to newname in this file

  Register the virtual machine with the ESXi server and it should be OK

  This link gives more details and other methods VMware KB: rename a virtual machine and VMware ESXi and ESX records

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.