Confirm the message on the device
Hello
Is there a way to check on the device if a Push message is received without writing a device application? I do a thrust of BES PAP for device port 8888 and the BES server responds with a status of "Accepted", but I can t find a way to confirm that the message was actually received by the device.
"Non-scientific" one way is to examine the data arrows in the upper right of the device. Shortly after sending the push, you should see the move arrows.
Tags: BlackBerry Developers
Similar Questions
-
Why my message a confirmation of reading on a device and not the other?
I use my iMessage on my iPhone 5 and my Macbook Air, however, sometimes when I send a message from a device it shows a read receipt to the other person on my mac, but not on my iPhone. The message on my iPhone remains as "delivered" much later and then seems to be read (I'm done yet receive confirmations of reading on my phone), but my mac delivers the message, and it seems that the message has been read afterwards, but it shows the path of the read receipt before my iPhone don't. I don't know if it's just one little problem and they have not actually read the message, or if my mac book is somehow showing the first read receipts?
Hello
It has to do with which ID is used to send the iMessages and what devices are then synced to see this info.
Device sending roughly see the pronouncement to feedback.
If it's the Mac using the Apple ID it will 'see' the 'read' first response.
However, if the Mac uses the iPhone number to send, then some info can run on the iPhone first it's the device the number belongs to.
The Mac is only then light "Copies" of the synchronization version.
Add to that the fact that some people will have a device set to join read receipts and not another.
It is basically not a precise answer that there are many factors that can influence it.
20:45 Thursday. 26 May 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
get error message that IOS 10 unable to connect to my iphone iTunes 6 because of an invalid response was received from the device
Make sure you are using iTunes 12.5.1 or later, as it is required to communicate to iOS 10.
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
-
If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!
Reset the iPad. Press and hold the power and home together for 10 seconds until the Apple logo appears.
-
anti-spam messages expected to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you
Unless you have jailbroken your iOS devices, there are no viruses that can infect them. Sounds like PayPal tries to return the ball.
-
How can I set up mail, (icloud) so that the deleted messages on one device are deleted on all devices?
Use an IMAP or Exchange e-mail on her system.
-
C7280 - cannot scan. Error message indicates another program has control over the device
I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:
'Cannot perform the function you have requested because another program has control over ice dev'.
I have nothing else open and so I can't work on what program has control over the printer.
C7280 Prtinter. Mac OS x 10.7.
The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.
So far, you have the choice of scanning with picture Capture or preview. I'm sorry.
-
Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.
Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.
The download is from Microsoft so it's safe!
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
Original title: I need a market to resolve the problem remove the instrument.
How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.
I can't know what "all patches" you've tried, but:
Make sure that the system restore does not monitor the external drive. SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max. Make a right click my computer and select properties then the System Restore tab to configure SR.
Make sure that the Indexing Service is turned off (at least for the external drive). To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp. For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc
There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
http://safelyremove.com/index.html Among other features:The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
"I CAN'T DISCONNECT MY SEAGATE EXTERNAL DRIVE I GET A MESSAGE SAYING 'THE DEVICE' GENERIC VOLUME ' CANNOT BE STOPPED NOW, TRY THE STOP DEVICE LATER, HELP PLEASE
Hello
· What is the service pack installed on the computer?
· Do you remember any recent changes on the computer?
Follow the steps listed in the link below: problem ejecting USB Mass Storage Device: http://support.microsoft.com/kb/555665
-
I get the message "No. Boot Device Detected" in Vista
I changed the battery in Dell Dimension e521 my mother. Then when booting I get the message "No boot device found". I can continue and boot from the CD. I tried to Dothe StartRepair bt he indicated there is no problems. How can I fant6mes the startup problem?
Hello
Installation/configuration (BIOS/CMOS) often F2 as you boot then watch the screen - make sure that the hard drive is set
first of all in the boot order.Check with Support from Dell, their online documentation, diagnosis and ask in their forums on any
known issues.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
installed a device and get an error message "(code 10) Impossible to start the device"
Installed Pinnacle Studio 12
Hi Bernard,.
Please provide the exact model of your device number.
12 code: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.
This error can occur if two devices that are installed on your computer received the same (Input\output) of i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS (Basic Input Output System), the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.
Method 1: Run the fixit available in the link below and then check if it makes a difference
Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us
Reference
Explanation of error codes generated by Device Manager
http://support.Microsoft.com/kb/310123http://TechNet.Microsoft.com/en-us/library/cc732199 (WS.10) .aspx
-
Netflix on media center crashes with the message 'checking activation of the device.
Netflix on media center
Netflix on media center crashes with the message 'checking activation of the device?
Hello
Try to disable the security software temporarily to see if that makes a difference.
Note: Make sure to enable the antivirus on IT to make sure that your computer is protected
For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Hello So I have this problem with Apple on the ATV4 music. The sound is really muffled and distorted. I changed the output 5.1 auto in settings and it seems to be a slight improvement, but is not the only striking sound is still not clear. Songs play
-
What happened to the search box, I type in? He disappeared on my Firefox Start Page.
-
How can I update the email address for iCloud?
I have a MacBook Air 11 from 2011. Operating system is OS X El Capitan. Today I changed my e-mail address and password for iCloud on my devices, but I can't seem to understand how to update the e-mail address on my computer. I asks me to enter my p
-
Satellite Pro A300D-1DZ - external VGA issue
Hello Someone else has had this problem where to connect an external monitor/projector to the external VGA port its does not work, just showing what looks like a very distorted picture, moving around the screen.Tried new drivers, BIOS update, change
-
Windows Vista Home Premium activation error (invalid key)
Can someone help me with the error in question? I put the key provided in the book, and always I have an error to activate.Kind regards Renato.