unknown user after recovery

Similar Questions

• Confused about accounts of users after recovery

  I managed computer recovery from a friend using an option that HP offers to "restore to the factory settings. The story behind this one is long - and in this forum with the subject "unable to rebuild the Boot.ini file.

  In any case, all this seems to have ended - BONE is recovered well and the system is clean of the virus system tools.
  The only thing that confuses me is that when I start the machine normally is propose an account (HP Director). When I boot in safe mode, I offer two user accounts (Administrator and administrator of HP, which is what they had before the trouble started). Seems strange to me.
  When I look at the hard drive I see files for all three accounts (there are two HP directors - the other is joined with a name extension I created w / recovery.) I see their data in the first HP administrator account.
  So, it is messy - ex, My Documents does not give them their documents - but other than this nuisance, should I worry?

  When you are connected to the Hp Admin account create a new account with administrator privileges and remove on behalf of Hp or, otherwise, simply change the name of the Hp's Admin account.

  The admin account, you see in safe mode is the default for windows xp administrator account. It cannot be accessed via safe mode unless you have xp pro. If you have xp pro it is accessible by pressing alt + ctrl + delete twice at the Welcome screen.

• unknown user may have reset my administrator and password of the user access.

  Woke up at 3:00 to hear the computer by clicking on, running 2 programs, one was Majic Jack the other did not. went to user accounts to search for an unknown user. Remove the user, VRI.net or something like that, but the first google
  He and found to be a developer software any. restarted after 55 keep me informed but wouldn't show it to them. I also changed the Welcome screen options, then after reboot shows my user name, but won't accept my password. Can it be delivered starting CMD line in mode sans-echec? and more importantly, how to prevent this in the future?

  Whenever someone thinks that their computer has been compromised, I suggest you have a local professional come on site to diagnose and repair. Respectfully, a regular user of the end won't know what to look for and how to secure the computer correctly.

  As for your password:

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. MS - MVP - Elephant Boy computers - don't panic!

• Search ACS 4.2 order unknown user from database

  Hello

  I have several user databases in the search order for the unknown user policy. Ignoring the manual (http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UnknUsr.html#wp277530), which States that, after the failure of authentication from the first database (Windows) the ACS does not continue to look for the second database, a RADIUS server. I see that, with the failure in the first user, database stops the ACS research and fails to the user authentication with an authentication failure code "external DB password invalid.

  Documentation not going or is this a bug in the ACS v4.2.1? How can I make the ACS to continue to seek the second database user?

  Hello Roberto,.

  If the external database returns an invalid username/password, then it is intended for ACS is not to check the following data in the sequence and the failure of authentication:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UnknUsr.html#wp277502

  "For authentication requests, ACS applies the unknown unknown user policy to users. ACS does not backup to the known or discovered users authentication failure unknown when user authentication support. »

  If you want that ACS to verify the following database, even if a response from the invalid username/password has been received, you will need to explicitly set this on the external Windows database configuration page, in the section entitled 'Strategy for the unknown user' (but on the database configuration page specific Windows, not covered by the unknown user policy) :

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrDb.html#wp354338

  In addition, on the previous screenshots, I could see that you have configured both as a result of database:

  Windows database

  RADIUS Server token

  So we may be running into a situation where the authentication method used is not supported by the tokens, Radius servers, and therefore impossible to check the second database in the list:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/UsrDb.html#wpxref36799

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/User_Guide/Overvw.html#wpxref846

  Kind regards

  Fede

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Unknown users" listed in properties and safety of a folder

  PROBLEM: "unknown users" are listed in the properties/security of a folder.

  I have Windows 7, 64-bit.

  The properties/security box from my "C:\Users\[my name]" folder lists two known as users
  "Account unknown (S-1-5-21-879640176-2077098734-2292519611-1001).
  and "Home Users", more legitimate users 'SYSTEM', 'Administrators', and
  "[my name]."

  After deleting the computer Acct limited, the 2 users are still listed.

  'S-1-5-21-879640176-2077098734-2292519611-1001' is not found by the Yahoo Search
  Engine. Windows specific engine search folder 'C:' and 'Users' research essentially
  indefinitely. For the folder named after me is nothing.

  Especially regarding'S-... ', this is the result of malware? Would the deletion or the other or both of these
  Users of harmful effects?

  Thank you.

  These inscriptions refer to the accounts that you have deleted from your computer. They are of no consequence, and they cause no harm.

• unknown user Skype with my email

  [The update by the moderator topic title should be more descriptive. [Original topic title was: 'unknown user Skype']

  Today at approximately 11:26, a Skype user, I've never added before is appeared on the list of my friend? Their display name is set to one of my emails (which is not registered to this Skype account including) and to my knowledge has no connection with the account that I currently use.

  I called and texted. The call never crossed and the message sent, no more. They have no user name in their info, only 'messenger' Panel, where the username is supposed to be.

  Anyone know what it is? It could be a kind of robot, but I don't know because this email is not connected to it. This could be because I have connected to the Skype account that the bot is associated on this computer, but I'm not sure.

  Screenshots down below.

  Any help or ideas for what this might be is greatly appreciated.

  

  http://community.Skype.com/T5/Windows-desktop-client/Skype-Messenger-allows-me-to-open-a-chat-window...

• Partition lost after recovery - Satellite L30

  I had two partitions on my HD (Satellite L30-114).

  I used the Toshiba recovery Cd to restore windows back to my laptop. The CD has not offered me a full mode or an Expert as written here http://support.toshiba-tro.de/kb0/FAQ350072001GR01.htm he has just recovered without any input on my side!

  After recovery, Windows does not see my second partition. I used the disk management utility, and it is said there are 17 GB of disk unassigned space (this is my second Partition!).

  Can and how can I restore it?

  TX a lot!

  Hello

  It seems that the L30 comes with a new version of the recovery cd.
  I think that the recovery procedure is a bit different than the old with 2 different recovery modes (standard and expert)

  I know a little new recovery procedure because a friend of mine bought a new Satellite with this recovery CD. He asked me for the installation of the laptop and we checked.

  It seems that you must press the setting button after the language selection.
  If you n t use the button setting for the configuration if the recovery procedure will be remove and erase everything on the HARD drive. I think you didn't configure the settings and therefore all the partitions have been deleted.

  Unfortunately I think that there is not much to do. You the partition has been deleted and it of not possible to bring back the lost data.

• Windows does not start after recovery

  Hey, satellite 1800 started son to have more and more slow to the point where it took close to an hour to boot in Windows. It got to the stage where it seemed that recovery from the CD was the only road - so we did. Everything had to look successful from the point of view of recovery but the installer of Windows XP displays "Please wait...". "with the normal activity of the disc looking for 20-30 seconds and then hangs - no disk activity, the mouse is not responding. I went through the recovery in "expert" mode and don't see any problems with the recovery process. Issues related to the:
  1 no matter who else seen elsewhere?
  2. what else can I do diagnosis-wise?
  3 which, basically, the recovery process not / (fact he re - format partitions, could it have left a virus?)
  4. I'm better h/w or s/w diags?

  Bitshifter

  Hi Bitshifter,

  topic of your question 3:
  The recovery process replaces the whole HARD drive or even a partition with an image created by Toshiba. This image contains an operating system, drivers, and a few basic programs. All other data (including viruses) in this partition will be deleted.

  question 4:
  I don't know the cause of your problem, but I think it's a hardware problem, because after recovery, there may be incorrect or missing software.

  Sorry I can't give you more information.
  Good luck!

• Laptop HP pavilion 15-e015tx: error after recovery

  I was faced with an error when turn on PC, so I called HP support and they sent me 3 recovery disks. and I did the whole recovery process according to them. but when my pc restarts after recovery happens a screen to install the software from 1 h to 2 h and my laptop restarts several times and this screen will appear. Help, please
  
  And I do something Meanwhile process failed in the face of an error in the software installation screen

  Just be patient and wait until she finishes, it takes some time. Don't worry too much.

• Satellite M40X 299: no boot after recovery

  Hello

  I have a problem with my satellite M40. After a problem with spy software, I tried to format my pc.
  I did a restore of the system with the original cd. At the end of the mind, I pressed ctrl + alt + delete to restart as it was written.
  But nothing happens, I have only a cursor in the upper left corner of the screen and windows does not start. I did the operation 3 times and it's always the same result.

  I don't know what more I can do.

  Thanks for help.

  Excuse me for my English

  It's very strange. Can you get the CD of Microsoft facilities and try to install the OS? I'm really interested if the same thing will happen again.

  Please don't be crazy on me because I t n wrote a few exact explanation but after recovery without end I've done in the last 8 years I have never seen anything like it.

• See not all users after reboot

  I put two on macbook iCloud account. When I log out I see screen with the other user, after reboot or turn off / I see that my profile and host, the other user has not.

  Disable the FileVault and both users are now available

• HP plugged music after recovery?

  HP Pavilion Ultrabook 15-b005eo with 8 64-bit Windows.

  Another question for today.

  Last week, I bought this laptop yesterday I did a factory reset because HP 3D DriveGuard had ceased to work telling me that hard drives are not supported. I tried all of the solutions provided by this forum and it still does not so I decided to try the factory reset I had nothing special on my computer yet - or that's what I thought.

  As the name of 'factory reset' suggests, the computer would be re-established, on the condition that I received it in.
  Almost everything was the way I was expecting. Except Norton and HP plugged music were missing. Not a big deal for Norton can be downloaded from their site, but music connected to HP is not available from their or your site. It is not yet available from the Recovery Manager.

  I had not yet activated the trendy music trial.

  Is there a way to get this back? There should be, because it is still a new computer, and it means I have the right to 90 days of the trial, right?

  PS. DriveGuard started working again after recovery.

  Hello! Problem solved!

  Here's how it worked:

  I saw this one blogpost for the installation of Windows 8 cleanly without the 'bloatware' for computers that came with 8 Windows pre-installed. There was in the blogpost instructions to use Windows built-in 8 'reset the PC' - function to get rid of the pre-installed programs and come back only to win 8. But in the section comment each commentator said that it did not work and all (incl. "bloatware") is restored when you use this function.

  I decided to try this and it worked! Everything that has been installed on this computer is returned including HP connected with music. It's a little weird when you use Recovery Manager it does not install connected with the music but when you use the built-in function of Windows 8, it is

  I would like to especially thank Jeff who got in contact with the support e-mail client. Although they do not really have change to really help me because the weekend came gives me a change to ask two things one another, so the contact with the customer is not useless.

  Thanks again for the help and I wish you guys.

• HP Pavilion 17-e102ed: unknown device after installing windows 8.1

  ACPI\HPQ6007 unknown device after installation windows8.1 64B

  17 - HP Pavilion notebook pc (ENERGY STAR) e102ed

  Device ACPI\HPQ6007\3 & 11583659 & 0 has been set up.

  Driver name: null
  The class GUID: {00000000-0000-0000-0000-000000000000}
  Driver date:
  Driver version:
  Driver provider:
  Section of the driver:
  Rank of pilot: 0x0
  Matching device ID:
  Advanced driver:
  Update of the device: false

  Hello:

  You need the driver for this device...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Cannot download programs and basic games after recovery.

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  All of a sudden we cannot download programs of basic games, after recovery we cannot not even down load dap download eccellerator!

  can help us, that's happened is that during the last 5 days.

  Hi Eric,.

  Chances are, something happened during the recovery process that prevents you from downloading something on the internet. One of the most common reasons for this is that the security settings are set too high. See the link below to learn how to change the security settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-security-settings

  Another reason that you might not be able to download whatever it is could be the settings you have enabled in your anti-virus program, if you are running one. If you are, try to disable the program while you download those