confused about the available memory after upgrade to ESXi 5.1
Hi noobie question here
After an upgrade to ESXi5.1 (wiped ESXi5.0 and installed fresh and imported 5.1 2 s previous VM), I can start is more two virtual machines when they use the 3 GB of RAM each. In ESXi5.0, it worked.
I need to reduce 2.6 GB RAM for each virtual computer. The only thing that I see is this "total capacity" is 5.7 GB while the system has 8 GB of RAM. Please see the attached picture (I don't know what 'Full capacity' read in ESXi5.0, so I can't compare)
I understand ESXi5.1 needs some overhead and that each VM needs some overhead, but I have yet an another 1.5 GB of RAM available for my VMs.
8185 (ability)
-2660-2640 (two machines)
-231-194 (overhead for 2 virtual machines)
= 2460
Does this mean that ESXi5.1 uses 2.4 GB of RAM to run 2 virtual machines? The photo shows 984MB in use without the virtual machines are started. So start-2 VMs cause ESXi5.1 use 1.4 GB more RAM?
If so, what form that would show? I am sure that it is me who is missing something, but please explain.
Thank you
Well Yes... somewhere down the line, the ESXi5.1 host memory usage was doped up to ~ 2 GB. In my system 32 GB, I use only 26 GB
But even once, there are a few tweaks to release some 500MB in the configuration of the distribution of system resources tab. You can have a shot at him. But I wouldn't recommend it.
Tags: VMware
Similar Questions
-
5 years of windows updates the historical use of the available memory lots?
I want to delete Windows update history in order to increase the available memory.
On Saturday, 22 September 2012 21:52:43 + 0000, rickxxx wrote:
I want to delete Windows update history in order to increase the available memory.
First of all, please note that the term 'memory' is used to designate the
place where the computer contains the program and data with which it is working
for the time being. It's normally a memory (RAM), but who can
be extended with the page or swap hard disk file. The word
'memory' is never used to refer to the space on a drive (be it
It's a hard drive, floppy disk, CD, DVD or thumb drive). Space on a
hard drive is normally called "storage" or simply "disk space".Call for 'memory' disk space is not so much wrong as we have just
unconventional. In a sense, the disk space is, of course, memory, but the
important thing to realize is that the word is never used in this way.
and if you do, you do so at the risk of confusion seriously your
public.So I guess that you may have about disk space, not memory. Do not
remove the previous updates, since doing so put you back in the
situation before the updates, with all the problems and risks to the security
only updates corrected.Also note that the amount of disk space, you may save is relatively
small. And if you are short on disk space, there are various things
You can do this will save disk space. But the amount of disk
space will be only a few cents worth. If this amount is
It would be important to you, not more than one
Palliative and the only real solution to your problem is to buy
a larger drive.Ken Blake, Microsoft MVP
-
Confused about the extension of the Sprite class
Howdy-
I learn programming with object oriented ActionScript and am confused about the class Sprite and OO in general.
My understanding is that the Sprite class allows you to group a set of objects that you can manipulate all the objects at the same time.
I explored the Open Flash Chart code and note that the main class extends the Sprite class:
Base/public class extends Sprite {}
What this lets you do?
Also, on a related note, how to draw, say, a line once I extended?
Without extend Sprite I could write:
var graphContainer:Sprite = new Sprite();
var newLine:Graphics = graphContainer.graphics;
...
And it works very well. Once I have extend the Sprite class, I'm lost. How can I modify this code so that it still draws a line? I tried:
var newLine:Graphics = this.graphics;
My understanding is that since I extend the Sprite class, I should still be able to call its method chart (or property? I have no idea). But, he screams at me, saying "1046: Type was not found or is not a constant of compilation: graphs.»
A number of things.
First of all, I would not use this approach in your table constructor. Setting the width and height only makes sense if you adjust the width and height of the existing content, and the table (Sprite) does not at this time here. If you want to give the table a 'size', you could do it like this:
public function Chart (width: Number, height: Number) {}
This.Width = width;
This.Height = height;
put in a background invisible to this size:
this.graphics.beginFill (0,0);
this.graphics.drawRect (0,0,width,height);
}There are other ways, including putting in a form or a Sprite of child as a child for the background so that clear will not erase the background of the chart. This way you could have properties for the background in your table class and update the background as a child DisplayObject instance... a few ideas to think to...
Then, after that, your chart should be functional...
Then back in your scenario, you could do this:
import graphics. Table;
Stop()
var myNewChart:Chart = new Chart (300,200)
myNewChart.render ();
addChild (myNewChart) -
Confused about the notion of VLAN
I'm confused about the VLAN. I thought that the notion of VLAN was this computer on different VLANS were not suppose to be able to communicate with each other. I am setting up a 6248 and for me to get DHCP to work, I need to enable ip Routing. When I turn the routing ip, all computers on different VLANS are able to ping each other. Is - it the way it was suppose to work, or am I missing something?MGMT is on vlan 4093DHCP is on VLAN 100 trunk e34 10.10.1.1Host 1 is on VLAN 200 trunk e34 10.10.2.1Host 2 is on VLAN 300 trunk e34 10.10.3.1active IP routing
-
Why my PC cannot use all of the available memory?
Hello
I have windows ultimate 64 bit and the 6 GB of ram (laptop)
http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG
As shown in the photo, there is a free memory and available memory
Total: 6058
caching: 2713
available: 2552
free: 1Why windows cannot use the available memory, although there is no such thing as free storage space!
What you see is normal.
Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.
If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.
Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.
I hope this helps you.
-
Confusion about the size of the array in Oracle 11 g
There is confusion about the size of a table. When exporting schema 'CRESTELWOMPRD601', the log file shows:
_____________________________________________________________________________________
. . exported "CRESTELWOMPRD601." "' TBLRSUBSCRIBERFIELDWORK ' lines of 12.62 GB 35568
____________________________________________________________________________________
which may involve the size of the TBLRSUBSCRIBERFIELDWORK table is 12.62 GB.
But when I find the size of the table using the query:
SELECT nom_segment, BYTES / 1024 / 1024 "SIZE (MB)" FROM dba_segments where owner = 'CRESTELWOMPRD601' and nom_segment = 'TBLRSUBSCRIBERFIELDWORK. '
He said that the size is only 9 MB for the TBLRSUBSCRIBERFIELDWORK table.
I hope that my request is clear that there is no clarity on the size of the TBLRSUBSCRIBERFIELDWORK table.
Please get back with the answer to my query
Concerning
Dba_segments indicates the space allocated to the segment while expdp indicates the size of the exported data, so if you had a table with a measure of 1 MB, but no data, dba_segments would 1 MB and expdp would report 0 bytes.
John
-
Hi, I'm Vero. I am a student. I want to download install Oracle Applications R12. I am very confused about the installation. I learned to know to install Oracle R12 apps, you have to install VM Box for Oracle Linux OS.
I'll be very grateful, if someone can provide the documentation for installing the software. (Please complete documentation)Thank you and best regards,
IsabelleHello Vero,
You can find information on documentation of the product for Oracle VM and Oracle VM templates on the following link:
http://www.Oracle.com/technetwork/documentation/VM-096300.html
You can find more information about Oracle VM on the following knowledge article, let me know if you have access to My Oracle support.
Model of machine virtual of Oracle for Oracle Siebel CRM - Quick Start Guide (Doc ID 951872.1)
Best regards
Chetan
-
I have more endurance, remove or insert the option pages after upgrade to Adobe DC. How to get back these functions?
Looks like you may have updated to misapplication. Probably, you have Adobe Acrobat (the full version) and installed Adobe Acrobat Reader instead. If you had "improved" Adobe Acrobat, it would have cost you money. Acrobat Reader is free.
-
Illustrator CS4 is no longer previews of fonts in the character palette after upgrade to Yosemite
Help, please... Thank you
Got a solution guys. The new transparency is the problem. Go to System Preferences > accessibility, and select reduce transparency. It should work.
-
Workstation 7 unable to reserve memory after upgrading the host Windows 8.
I just updated my computer, running VMWare Workstation 7, Windows 8.
Now, when I start a VM, I get a message similar to:
"Not enough physical memory is available to power on this virtual machine with its configured settings. To resolve this problem, increase the support of physical memory for all the virtual machines to XXX MB or adjust the settings of extra memory to enable more virtual memory machine to be swapped. »
- In the preferences, memory, my memory 7138 MB reserved for all virtual machines.
- I chose 'Allow more virtual memory machine to swap'
- Windows Resource Monitor indicates that I have more than 5 GB of free memory.
- I tried to upgrade to 7.1.6, but that did not fix the problem.
But I am still unable to start any VM - even one with as little as 128 MB of RAM that are entrusted to him. These are the same VMS I was used to running on Win7 before the upgrade.
-> Adam
(The display for people who might find this thread through a search on the web)
I got the same error. What worked for me was to uninstall, reboot, then reinstall as follows:
1. define the model of compatibility to Setup WinXP SP3 and run as administrator.
2. install by double-clicking on the Setup
3. once the installation is completed, set the compatibility to vmware.exe model also be WinXP SP3 and run as administrator.
On workstation 7 starting, I was then able to start my vms without problem.
VMware Workstation 7.1.6 - 744570. Host is an x 64 i7 - 3520 M with 8 GB of ram running Windows 8 rtm. Administrator account.
-
Confusion about the requirements for the 2015 CC software
I currently have Windows 8.0 (64 bit) which is so satisfactory and stable. I have not upgraded to 8.1 Windows because I can't install same normal updates for Windows 8.0 without experiencing freezes system that only restore points can heal. So for now, I would stick with what I have. But the problem is the confusing requirements for various programs within the pile of creative cloud applications:
Premiere Pro: Microsoft Windows 7 Service Pack 1 (64-bit) or Windows 8 (64-bit)
Photoshop: Microsoft Windows 7 with Service Pack 1 or Windows 8.1Illustrator: Microsoft Windows 7 with Service Pack 1, Windows 8 or 8.1 Windows
Dreamweaver: Microsoft Windows 7, Windows 8 or 8.1 Windows
Hearing: Microsoft® Windows® 7 with Service Pack 1 (64-bit), Windows 8 (64-bit) or Windows 8.1 (64-bit)
So what I'm confused about is the fact that Windows 8.0 is not listed for Photoshop, but Windows 7 and Windows 8.1 are. Does this mean Photoshop CC 2015 is not compatible with Windows 8? And that means that Premiere Pro is not compatible with Windows 8.1 since only 7.0 (SP1) and 8.0 are listed, I would have preferred the upgrade of software CC WITHOUT update Windows since I am picky on my installation of Windows 8 stable pipes now solid as a rock. Fortunately, Illustrator, Dreamweaver, and hearing are compatible with all three, it seems.
Can someone clear up the confusion, please?
I think that my hardware is OK for this.
Motherboard: Asus Crosshair Formula V-Z (AMD 990FX)
CPU: AMD FX-6300 Vichera 3.5 GHz
Memory: 16GB Kingston HyperX DDR3 2133 MHz
Video: MSI N650-MD1GD5/OC GeForce 650MX
Monitor: Acer S271HL of 27 "(1920 x 1080)"
Power supply: Seasonic X-Series 1050W (SS-1050XM Active PFC F3)
HDD1: Western Digital 320 GB (System)
HDD2: Seagate SV35 Series (ST1000VX000 1 TB 7200 RPM 64 GB OEM)
VidCap: Blackmagic intensity Pro HDMI
USB hub: Rosewill RDCR-11005 5.25 "
UPS: APC Back-UPS XS 1500
Router: Netgear WNDR3700 N600
System is NOT overclocked
It is compatible but not tested.
-
Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista
HII!
IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.
The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
They will return the laptop for windows xp or from my laptop has another operating system they will not work?Also...
What's the deal with BIOS? : S
I don't understand!
If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
As I download the new drivers before upgrading Yes?Thank you!
The restore CD will of course work.
The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.> What's the deal with BIOS? I put t understand!
> If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.Some series Satellite A200 needs a BIOS update if you want to use the XP.
In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.Best regards
-
Confused about the capacity of the HARD drive on my new Equium L350
I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.
I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
Any help would be appreciated.
Thank youI agree with InvaderZim.
But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.
I assume you are using the Vista operating system.
Vista uses hidden for some files from recovery partition.
If you check the Disk Manager, and you should see all available on your HARD disk partitions.See you soon
-
HTML inside the cRIO crash after upgrade NI RIO NI RIO 3.0 2.3
Hello
I was upgrade software cRIO of NI RIO 2.3.1 NiRIO 3.0 and the HTML (vi web visualization Panel) which created previously in LV 8.5 crashes. I have also try to ftp the slot inside the cRIO directory and display the html file.
FTP://host ip/nor-rt/system/www/lvtest.html it also crash error "fatal error occurred during use, close the connection.
So, I'm not sure why t did that everything I have just to update the version of the software.
Thank you
Taylor
When you stop your remote façade, you must restart to save to get it again. That's just how the panels work front. You design it where it should not be stopped.
To see the available disk space, go to MAX and left click on your target. On the right pane, there is a "System settings" tab that will display the total memory and availablme.
-
HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10
Hello
I upgraded Windows 8.1 to Windows 10 yesterday.
Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.
When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"
On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.
Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.
Thank you best regards &,.
Umesh
Here are the technical details:
http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF
It is HD4400 Intel graphics
Try the Intel driver update utility:
https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility
Download drivers HP pages not available right now.
Maybe you are looking for
-
Connection wifi MacBook largue network from the internet
My home network goes down internet connection when I connect to my router wireless with my mac pro book. There are 5 other devices connected in wifi and the system is stable for days if my macbook is not connected. Other devices include iphone, andro
-
This has happened also in Windows XP I used until recently. Yahoo email menu is there but the Firefox menu is above it. I tried Firefox in all off safe mode and the problem happened again. I tried Yahoo mail in IE 9, and the right button of the mouse
-
where to look in to connect my printer?
-
My firewire cable connection works only once
I am using windows vista with Service Pack 2.My scanner connect using firewire-firewire.He is picked up first, then does not work afterwards.The scanner will not end his departure upward, unless the cable is removed.If I turn the cable autour, it wil
-
Adding feeds to "feeds.xml".
Hello everyone, I am currently in programming as a hobby. I love the Blackberry OS 10 and I'm interested in coding for the platform. I use the waterfalls (QML and C++), and I'm doing a podcast, as BPod and PodcastAddicts (Android) downloader. I desig