Confused with the reinstallation of the OS

Similar Questions

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• Confusion with the implementation rate Comp

  I'm a bit confused with the implications of fixing the rate of the wrong frame.  My camera can record to 23.976 however the manufacturer sometimes mentions this parameter as 24 p in the manual.  I read that there is no harm using 24 p if the model is a bit long second.  But questions arrise if the model is longer and you are being followed.  On the other hand, mocha specifies that you be specific in the choice of your pace.  The difference.024 makes a real difference?

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  CS5.5

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  You can blame the TV standard NTSC color for the odd frame rate.  At the same time, it was really 30 frames per second.  These are the days of TV in black and white ONLY.  Engineers worked mightily to get to a color system that was compatible with existing B & W games millions, and they finally got it.  But to answer a color signal, they need a little bit more information in each image. The NTSC signal was already packed and needed something to give, so they slowed down the pace a bit.

  Thus, 30 images/s became 29.97... and in direct proportion, 24 fps is 23.976.  Just learn to live with it.

  "Yes, well how can you avoir.976 of an image?

  You can not.  But a frame does NOT miss a count of the number of frames in a second. It's really a MEASURE OF TIME.  PAL-Land, a frame is 1/25 of a second.  In Hollywood, a frame is 1/24 of a second.   In days of yore NTSC, a frame was 1/30 second.  But since 1953, 1/29.97 second.

  Don't obsess over 29.97 and 23.976.  Just use them and get used to them.  Do not put 29.97 images in a model of 30 fps, or 23.976 images in a model of 24 fps just because you like whole nice.  If you do, the movement of the images you shoot can go all twisted up.  Do not.  Do not.

  End of sermon.

• confusion with the categories and types of backups

  Hello
  
  I started studying the RMAN and I'm getting a little confused with the backups... ask someone to clarify the following queries:
  
  1. HOT times and COLD backup strategies perform BACKUPSET BACKUP and COPY of the IMAGE?
  
  2 about the HOT water and COLD backup, are they only associated with the FULL backup?
  
  3. incremental backup are also HOT or COLD backup?
  
  4. incremental has 2 types: Cumilative and differentiated?
  
  
  I'm a bit confused with the above...
  
  Help, please.
  
  Concerning
  KK

  Whether HOT or COLD:
  BACKUP DATABASE will create BACKUPSETs

  (this default value can be overridden if you have set up the TYPE of DEVICE...) BACKUP TYPE to... where the backup type can be changed by default for the COPY.

  Whether HOT or COLD:
  DATABASE BACKUP AS COPY will create Copies of the Image

  An incremental backup can be a HOT or a COLD backup.

  Hemant K Collette

• So confused with the export

  Hi everyone, I used FRAPS to record the gameplay of a certain video game and he did three different clips (the other continues where the previous clip ended). I want to change this in After Effects, but first, I need to do a video together. I thought that first Pro CS5 could do the job, but I'm confused with the sequence settings. It seems like everything I try only reduced the original clips for a video surrounded by a big black space. The clips are 840 x 524. I want to join the clips and then export it to the size of origin, but first Pro CS5 changes the size of the video. Help, please.

  You must establish a pre-defined sequence which corresponds to you source footage. If there is no one to begin with, choose office and there you can set almost all the parameters of the sequence. Which will remove the black borders.

  To work with FRAPS materials, there are several threads on the CS4 and prior to the forum. A search on "FRAPS" who should appear. Lots of good reading.

  Good luck

  Hunt

• Confusion with the PF_Cmd_SEQUENCE_FLATTEN command.

  Hello

  I am very confused with the PF_Cmd_SEQUENCE_FLATTEN command. In literature, it is mentioned that it is sent when recording and duplication of a sequence. When I duplicate my custom effect FLATTEN is sent. But my confusion here is that this command is sent to the former effect which is reproduced or duplicated new effect?

  Think about what I'm doing. Please let me know where the explanation is not enough:

  I store an int value in the sequence data. And for each effect I continues to increment.

  1. I add a layer. Then I add 2 effects customized with data sequences 1 and 2 respectively.

  2. now duplicate the layer. PF_Cmd_SEQUENCE_FLATTEN command. I increment the sequence data. It is called twice for 2 custom effects. Data are 3 and 4 respectively for 2 new duplicate effects.

  But the problem is that now the effects in the first layer and the second layer, both have same sequence data. that is the 3 and 4 respectively and not 1, 2, 3 and 4.

  This can happen if the FLATTEN command is sent to the former effect prior to duplication. It's my guess that both the layer effects have updated IDs.

  Any ideas?

  Thank you

  Dheeraj.

  so...

  during the FALTTEN event records some data:

  I'm #3 on layerID 1024 in comp itemID 17 effect.

  during the commnad UNFLATTEN effect checks that it is.

  If there is effect on layerID #3 1024 17 itemID tabletop,

  He must say what the former effect.

  If data are different, it means that it is the new effect.

  It is possible that the UNFLATTEN commnad happenes before the effect has it's own effectRefH again.

  so you have to wait with this review the first call of updateParamsUI.

• Confused with the Versions and updates

  I'm relatively new to vmware and I'm getting used to our current configuration I find myself confused.

  As I am connected to VMware Infrastructure Client, I click on help and VMware Infrastructure. He says the customer is build version 2.5.0 147704 and Virtual Center is 2.5.0 build 147633.

  When I look at my hosts, I see they are VMware ESX Server 3.5.0 176894

  My question is, how do I update my hosts and also VMware Infrastructure, as appropriate.

  I'm a bit confused, because I went through a class for vSphere 4 and I'm trying to understand the differences between the two.

  Welcome to the Forums-Yes, it's confusing ESX 3.5 and Virtual Center 2.5 are the previous version of the flagship product of VMware and were components of Virtual Infrastructure 3, also called VI - 3 - with the release of the new version of VMware brings everything up to a common version 4 number so ESX/ESXi is now version 4-Virtual Center is now version 4 as well and has a new name vCenter - and are components of vSphere - love anywhere with the software updates you get the better performance and new features such as VMware Fault Tolerance, distributed switches, 8 vCPUs and 256Go maximum for virtual machines.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Be confused with the absolute/relative links

  I have a simple site and use PHP includes.

  I use paths that have the... / in front of them so that they are related.  I understand that I may use a path with just the bar oblique fwd and not two periods at the front, but I don't know why.

  My site works ok direct, but not when I use localhost to preview in the browser.

  What I'm doing wrong or not seeing?

  Thank you

  Martin

  Installs on the Dreamweaver application development forum, which deals with PHP and other things aside server.

  You are also confused about the difference between absolute and relative links. An absolute link is a complete link - it contains the full path. Links that start by... / and / are both relative links. The first style is compared to the document. The second is relative to the root of the site.

  When you use PHP includes, the path to the include file must be compared to the document or the file must be in the PHP include_path.

  When you use links inside of an include file, they should normally be from the root of the site.

  Your links do not work locally because the root of the site is localhost. Probably, you develop your site in a subfolder of localhost. Therefore, the links point to a folder above what you want.

  The solution is to create a virtual host. Details on the configuration of the virtual hosts in Windows can be found in this tutorial on my website: http://foundationphp.com/tutorials/apache22_vhosts.php.

• Confusion with the file system OCFS2 OCR and voting disk RHEL 5, Oracle11g,

  Hi all
  
  I am trying to install the Oracle 11 g 3 node RAC database
  
  The environment on which I must make this implementation is as follows:
  Oracle 11g.
  Red Hat Linux 5 x 86
  Oracle Clusterware
  ASM
  Storage EMC
  250 GB of disk storage.
  SAN
  
  From now on, I am installing Oracle Clusterware on 3 nodes.
  
  I performed these tasks for cluster installations.
  
  1 configure the kernel parameters
  2 configure the user limits
  3 edit the /etc/pam.d/login file
  4 set up the groups and users to the operating system for Oracle Clusterware
  5. configure the environment Clusterware Oracle owner
  6. install the rpm CVUQDISK package
  7 configure the Hosts file
  8. check the network configuration
  9 configure SSH on all the Cluster nodes (equivalence of the user)
  9 enable SSH on all the Cluster nodes (equivalence of the user)
  10 installing Oracle Cluster File System (OCFS2)
  11. check the Installation of the (OCFS2) Oracle Cluster file system
  12 set the OCFS2 (/ etc/ocfs2/cluster.conf)
  13 set up the stack of Cluster O2CB for OCFS2
  
  BUT, here again the after that I'm a little confused on how to proceed. The next step is to format the disk and mount the OCFS2, directories of software... so, create etc.
  I asked my administration system to provide me with two partitions so that I could get in shape with the OCFS2 file system.
  
  He wrote telling me.
  
  * "Is what you want before I do it?" *
  
  * / dev/emcpowera1 is 3 GB and OCFS2.* format
  * / dev/emcpowera2 is 3 GB and OCFS2.* format
  
  * Those who are big enough for you? If not, I can re-size and re - format the *.
  * before I climb on the servers.*
  * the SAN is shared storage. / dev/emcpowera is one of the three LUNS on *.
  * storage is shared, and it is 214 GB. At the moment there are only two *.
  * partitions on it - the ones I have listed below. Can I repartition the LUN everything *.
  * as you want it.*
  * Where do you want that these climbs to: *.
  
  * / dev/emcpowera1 *.
  * / dev/emcpowera2 *.
  
  * I thought if this mounting technique would work as follows: *.
  
  * emcpowera1: / u01/shared_config/OCR_config *.
  * emcpowera2: / u01/shared_config/voting_disk *.
  
  * Let me know how you would like that mounted. » *
  
  Please recommend me what I should pass so that I can ask him exactly the same.
  
  My second question is, as we use the DSO, for which I'm going to configure ASM after clusterware installation, do I install Openfiler?
  PLS, check the environmental information that I provided above and make recommendations.
  
  As of now, I am using Jeffery hunters guide to install the entire installation. You think the installation guide everything is fine with my environment?
  http://www.Oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
  
  Kind regards
  MK

  Hello Lawrence,.

  Thank you.

  Mark this question as answered.

  See you soon,.

  Rodrigo Mufalani
  http://mufalani.blogspot.com

• Questions and Confusion with the game automatic and unable to implement the ReadyBoost for a storage device

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  Hey RayRay43

  You must make sure that the flash player is suitable for readyboost

  read all the information on the setup of readyboost to bleepingcomputer tutorial link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  have a happy holiday season

  Walter, the time zone traveller

• confused with the Page, AbstactPane, and GroupDataModel

  Hello

  I have an application that has 3 receptacles showing different content (2 show an html page, 1 to GroupDataModel).

  The pages of the interface user is written in QML, but I create the page in C++ and fill it there. Here are the important parts of my code:

  // applicationUI.cpp
  
  Page* ApplicationUI::doLoadPageDetails(QString fn) {
  
    QmlDocument *qml = QmlDocument::create("asset:///PageDetails/PageDetails.qml").parent(this);
    qml->setContextProperty("app", this);
  
    qml->setContextProperty("minutesData", &AMinutesData);
  
    Page *newPage = qml->createRootObject();
  
    AbstractPane *root = qml->createRootObject();
  
   GroupDataModel *contactModel = root->findChild("contactModel");
  
  // ------ FILL PAGE WITH CONTENT
  
    Application::instance()->setScene(newPage);
  
    return newPage;
  }
  

  Now I open a file from the file Explorer directly all information is displayed in the application as supposed, but the back button is missing.

  When I remove the AbstractPane the back button is there, but of course in my GroupDataModel contacts are not shown. Can someone tell me how I can integrate the GroupDataModel to my user interface without losing the back button?

  Or why the back button is missing when I use a component summary here? Because the AbstractPane is not a back button and then "crush" the back button?

  Very well. I "solved" the problem by going in a different way.

  I've written a C++ function that gives me a GroupDataModel.

  Can I fill this GroupDataModel with the content and call the C++ function in QML.

  It is all described here:

  http://deanlogic.com/blog/2013/09/20/DataModel-change-trigger/

• confusion with the analytical functions

  I created an example where I am right now with the help of analytical functions. However, I need the query below to return an additional column. I need to return the result from:-' factor_day_sales * max (sdus)'. Any ideas?
  
  If the first column is located and must have the following results
  
  777777, 5791, 10, 1.5, 15, 90, 135, 7050
  
  the 1350 is the result, I don't know how to do. (some how to multiply factored_day_sales max (sdus) 15 470 = 7050

  create table david_sales (
  pro_id number(38),
  salesidx number (38,6),
  tim_id number(38));
  
  truncate table david_sales
  
  create table david_compensations (
  pro_id number(38),
  tim_id number(38),
  factor number(38,6));
  
  
  insert into david_sales values
  (777777, 10.00, 5795);
  insert into david_sales values
  (777777,20.00, 5795);
  insert into david_sales values
  (777777, 30.00, 5794);
  insert into david_sales values
  (777777, 40.00, 5794);
  insert into david_sales values
  (777777, 100.00, 5793);
  insert into david_sales values
  (777777, 10.00, 5793);
  insert into david_sales values
  (777777,80.00, 5791);
  insert into david_sales values
  (777777, 10.00, 5791);
  
  insert into david_compensations values
  (777777, 5795, 1.5);
  insert into david_compensations values
  (777777, 5793, 2.0);
  insert into david_compensations values
  (777777, 5792, 1.0);
  insert into david_compensations values
  (777777, 5791, 1.5);
  
  
  
      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj 
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795

  Thanks for looking

  Is that what you want?

      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj
      , (s.salesidx * NVL(c.factor, 1) * sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id))
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795
  
  SALES_PRO              COMP_PRO               SALES_TIM              COMP_TIM               DAY_SALES              FACTOR                 FACTORED_DAY_SALES     SDUS                   SUMMJCJ                SUMMEDMULTI
  ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ----------------------
  777777                 777777                 5791                   5791                   80                     1.5                    120                    90                     135                    10800
  777777                 777777                 5791                   5791                   10                     1.5                    15                     90                     135                    1350  
  

  I get the 1350

  or did you mean:

      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj
      ,  s.salesidx * NVL(c.factor, 1) * (sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id)) summedMulti
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795 
  
  SALES_PRO              COMP_PRO               SALES_TIM              COMP_TIM               DAY_SALES              FACTOR                 FACTORED_DAY_SALES     SDUS                   SUMMJCJ                SUMMEDMULTI
  777777                 777777                 5795                   5795                   10                     1.5                    15                     300                    470                    7050
  

  Note, in the second block, I changed it just to use sumMjCj instead of sDus which seems to correlate with what you wanted (15 * 470 = 7050) while sdus is 15 * 300 = 4500

  Published by: tanging on December 11, 2009 06:17

• I'm not going to create a website of colorfull, but I confused with the color combinations?

  Please suggest the best sets of colors coporarte

  Hi Hans gave you some good answers, but there are a few other alternatives.

  ColorImpact is very good but not a PC

  Color with ease

  I like the color of the wing wheel as it is just a file .psd where you rotate a layer to see complementary colors, which is a great idea. It used to be free on Behance, but I think that its now $5

  

  I tend to be old fashioned and use a color wheel. They are available in the arts and on Amazon stores for about $10. A picture of the one I have is below. A good thing to know is that they come in two sizes 'Pocket' as below and complete. It is surprising how few people understand the color theory and color wheels. I used to get confused by Sir Issac Newton, prisms, Spectra and the underlying science, actually once you know is very easy, so I linked to a YouTube video showing you how to use a wheel of colors to get perfect harmonious colors. The wheel of colors in the vid is a full and broad for a desktop computer. The pocket of one is the size of a DVD.

  Hope that helps

  Terri

  

• Confusion with the settings of export to YouTube

  I looked here, but there is so much of it that I don't understand and cannot find sufficient explanations for anywhere.  It's not very often that I have create YouTube videos, but when I do, I need to use the best quality.  Please keep in mind that what I'm looking for above all is WHERE and HOW to change these export settings format in Premiere Pro while exporting to H.246.

  https://support.Google.com/YouTube/answer/1722171?hl=en

  So basically, I have a list of questions, what I need answers.  I use the latest version of first Pro CC 2014 (2015 is NOT yet).

  "Container: MP4.

  • No lists Edit (or the video power are not treated correctly)
  • Moov atom at the front of the file (quick start)"

  I tried to find something this moov atom, but most of the explanations that I find are very old.  Similarly, they are confusing to me.  What is Premiere Pro automatically takes care of nowadays when exporting H.264?  Is there something I should be doing instead?

  "Video Codec: H.264.

  • Progressive scan (without interlacing)
  • High-profile
  • 2 consecutive B-frames
  • Closed group of PICTURES. GOP of half of the cadence.
  • CABAC
  • Variable bitrate. No rate limit necessary, though we offer recommended flow rates below for reference
  • "The chroma subsampling: 4:2:0"

  From what I've read about the GOP, I think it has something to do with keyframes, but I really don't understand it no more.  In the export settings for I make that adjustment?

  Similarly, is something that first already uses, or is there a setting that needs to be adjusted so that CABAC?  If so, how do I adjust that?

  I'm also not sure what decides the type of images (as in the B frames, above).

  I don't see where this Chroma subsampling option is either.
  

  Finally, if YouTube recommends being transferred to 384 kbit/s AAC stereo audio, why do stereo audio AAC which is attached to the H.264 video in first is limited to be exported to 320 Kbps?  I noticed that audio 5.1 going up to 640 Kbps, but my audio is not stereo, so I do not think, it would be wise to use 5.1 just to get a flow rate higher with AAFC.

  Now, understand, I'm aware that some of these options are probably the things that are determined by the H.264 on its own; but that's what I need to know in the first place.  That's what recommend YouTube and read the pattern online that really does refer to the YouTube is NOT useful; That's why I need to know how to change all the settings I've already mentioned, what instead of some of the things I've done and also how to change these export settings since some of them appear not at all, if they can even be changed in the first place.

  Personally, I wouldn't worry too much on this subject that recommend YouTube and just use the appropriate YouTube H264 predefined in PremierePro.

  Try to match their recommendations for what would probably be a different infitesimal of quality would simply wither away your life

• BlackBerry 10 Confusion with the OS versions

  Good evening

  where can I find which version number is the latest version of the BB OS? I couldn't find the number on the BB site, but found one in the English Wikipedia: 10.3.2.2789.

  My phone (Q10) says he has the version of the 10.3.2.2474 software and the operating system version 10.3.2.2639, and it is said that this version is the latest version.

  How comes that this number is different so the wikipedia article and where can I find the correct version in the BB Web site?

  Thanks for any information.

  Q.

  Hello

  Yes, it is a matter of confusion. But do not understand that it is not strictly BBs responsibility to clear up the confusion. Indeed, BB control only a tiny part of the OS release cycle to end users. BB releases OS packages they approve in the world at the same time... but he returned to service businesses and other entities to control final to decide if/when a BONE should be released to their set of end users. Therefore, it is very likely for two holders of the exact model same device to have two different answers to the question of 'the latest OS', for this answer depends on each entity having approved control and pulled him out of their set of users.

  Complicating things is the difference between the OS and the version of the software. Reference:

  • http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000023393

  Depending on who you work and what is the context, you may need to understand both of them and be sure that you talk about appropriate things so that understanding can arise between the parties to the communication. Version of the software is, basically, a conglomerate of BONES, Radio and other versions in the package... However, I don't know, how they derive the values of version of the software. I find that in most cases, it is wise to always use two values in discussions (e.g., "OS10.3.2.2639/SR10.3.2.2474").

  QUADRATUR wrote:

  How comes that this number is different so the wikipedia article

  Wikipedia is a database of users of the information... If nobody contributed updates, then they do not reflect.

  QUADRATUR wrote:

  where can I find the correct version in the Web of BB site?

  You do not have... I have never found that a BB OS/SR easily visible Web page free. There are utilities that can be obtained and executed on BB servers to discover the information, but they are technical, time-consuming and a lot of time to properly interpret the results. I have, however, recently created a list of all the values of BB10 OS/SR, going back... some time to refer:

  • http://1drv.Ms/1ZclMl5

  Once again, however, it is only what BB has published the world... He said nothing that any specific control entity (for example, companies) may or may not have approved for their set of users. Via the official/automatic methods, you will only be offered which your control entity approved. Using unofficial methods to get anything other than that.

  Good luck!