Be confused with the absolute/relative links

Similar Questions

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• We can share with the Community (related to oracle) document which can be useful for someone... ?

  Dear all,

  We can share with the Community (related to oracle) document which can be useful for someone... ? Is there a specific place, so that it... where, once that we download... our document is checked and published if it is deemed sufficiently credible... ?

  Thank you and best regards,

  Séverine Suresh

  Question has now moved to the space of the feedback from the community.

  The community provides for the possibility for members to upload documents to the content-> spaces of Documents in the workspace of each product (if available).  However, the feature is currently disabled for most members due to problems with spam, so only a few members (most of Oracle employees) have the necessary permissions to do this.

  The admin studying how they can implement something that would allow members to upload documents, etc., which also has some mechanism to prevent spam.

  There is an idea already created for this: allow users to create community Documents

  for the Admin provided details on their current attitude

• Confusion with the implementation rate Comp

  I'm a bit confused with the implications of fixing the rate of the wrong frame.  My camera can record to 23.976 however the manufacturer sometimes mentions this parameter as 24 p in the manual.  I read that there is no harm using 24 p if the model is a bit long second.  But questions arrise if the model is longer and you are being followed.  On the other hand, mocha specifies that you be specific in the choice of your pace.  The difference.024 makes a real difference?

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  CS5.5

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  You can blame the TV standard NTSC color for the odd frame rate.  At the same time, it was really 30 frames per second.  These are the days of TV in black and white ONLY.  Engineers worked mightily to get to a color system that was compatible with existing B & W games millions, and they finally got it.  But to answer a color signal, they need a little bit more information in each image. The NTSC signal was already packed and needed something to give, so they slowed down the pace a bit.

  Thus, 30 images/s became 29.97... and in direct proportion, 24 fps is 23.976.  Just learn to live with it.

  "Yes, well how can you avoir.976 of an image?

  You can not.  But a frame does NOT miss a count of the number of frames in a second. It's really a MEASURE OF TIME.  PAL-Land, a frame is 1/25 of a second.  In Hollywood, a frame is 1/24 of a second.   In days of yore NTSC, a frame was 1/30 second.  But since 1953, 1/29.97 second.

  Don't obsess over 29.97 and 23.976.  Just use them and get used to them.  Do not put 29.97 images in a model of 30 fps, or 23.976 images in a model of 24 fps just because you like whole nice.  If you do, the movement of the images you shoot can go all twisted up.  Do not.  Do not.

  End of sermon.

• confusion with the categories and types of backups

  Hello
  
  I started studying the RMAN and I'm getting a little confused with the backups... ask someone to clarify the following queries:
  
  1. HOT times and COLD backup strategies perform BACKUPSET BACKUP and COPY of the IMAGE?
  
  2 about the HOT water and COLD backup, are they only associated with the FULL backup?
  
  3. incremental backup are also HOT or COLD backup?
  
  4. incremental has 2 types: Cumilative and differentiated?
  
  
  I'm a bit confused with the above...
  
  Help, please.
  
  Concerning
  KK

  Whether HOT or COLD:
  BACKUP DATABASE will create BACKUPSETs

  (this default value can be overridden if you have set up the TYPE of DEVICE...) BACKUP TYPE to... where the backup type can be changed by default for the COPY.

  Whether HOT or COLD:
  DATABASE BACKUP AS COPY will create Copies of the Image

  An incremental backup can be a HOT or a COLD backup.

  Hemant K Collette

• So confused with the export

  Hi everyone, I used FRAPS to record the gameplay of a certain video game and he did three different clips (the other continues where the previous clip ended). I want to change this in After Effects, but first, I need to do a video together. I thought that first Pro CS5 could do the job, but I'm confused with the sequence settings. It seems like everything I try only reduced the original clips for a video surrounded by a big black space. The clips are 840 x 524. I want to join the clips and then export it to the size of origin, but first Pro CS5 changes the size of the video. Help, please.

  You must establish a pre-defined sequence which corresponds to you source footage. If there is no one to begin with, choose office and there you can set almost all the parameters of the sequence. Which will remove the black borders.

  To work with FRAPS materials, there are several threads on the CS4 and prior to the forum. A search on "FRAPS" who should appear. Lots of good reading.

  Good luck

  Hunt

• Confusion with the PF_Cmd_SEQUENCE_FLATTEN command.

  Hello

  I am very confused with the PF_Cmd_SEQUENCE_FLATTEN command. In literature, it is mentioned that it is sent when recording and duplication of a sequence. When I duplicate my custom effect FLATTEN is sent. But my confusion here is that this command is sent to the former effect which is reproduced or duplicated new effect?

  Think about what I'm doing. Please let me know where the explanation is not enough:

  I store an int value in the sequence data. And for each effect I continues to increment.

  1. I add a layer. Then I add 2 effects customized with data sequences 1 and 2 respectively.

  2. now duplicate the layer. PF_Cmd_SEQUENCE_FLATTEN command. I increment the sequence data. It is called twice for 2 custom effects. Data are 3 and 4 respectively for 2 new duplicate effects.

  But the problem is that now the effects in the first layer and the second layer, both have same sequence data. that is the 3 and 4 respectively and not 1, 2, 3 and 4.

  This can happen if the FLATTEN command is sent to the former effect prior to duplication. It's my guess that both the layer effects have updated IDs.

  Any ideas?

  Thank you

  Dheeraj.

  so...

  during the FALTTEN event records some data:

  I'm #3 on layerID 1024 in comp itemID 17 effect.

  during the commnad UNFLATTEN effect checks that it is.

  If there is effect on layerID #3 1024 17 itemID tabletop,

  He must say what the former effect.

  If data are different, it means that it is the new effect.

  It is possible that the UNFLATTEN commnad happenes before the effect has it's own effectRefH again.

  so you have to wait with this review the first call of updateParamsUI.

• Questions and Confusion with the game automatic and unable to implement the ReadyBoost for a storage device

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  Hey RayRay43

  You must make sure that the flash player is suitable for readyboost

  read all the information on the setup of readyboost to bleepingcomputer tutorial link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  have a happy holiday season

  Walter, the time zone traveller

• Problem with the af:table links and views

  I want to display a table with data from a database table called PERSON, so I use af:table tag.

  The PERSON table has the following fields:

  • PERSON_CODE
  • PERSON_NAME
  • PERSON_COD_STATE

  The PERSON_STATE field is a foreign key to another table called PERSON_STATE:

  • PERSON_COD_STATE
  • DESCRIPTION

  I created a view for the data of the PERSON (personView) table. Because I want to show the person status description in the af: table, I created another view for the data in table PERSON_STATE (personStateView). And I've also created a link between personView and personStateView.

  In the column of the af: table that represents the State of no one, I drop the field 'description' of the State view linked to the view of anyone.

  When I run the JSP, the State is not displayed correctly. All persons are displayed with the same State.

  During the test directly with the application module, the display link works correctly.

  View links inside an af:table work?

  I work with ADF 10 g.

  Thank you

  Your scenario should be treated with a sql (VO on two EOs) join with a relationship master / detail. The table will be able to browse the details for each master record to time stamping.

• Confused with the Versions and updates

  I'm relatively new to vmware and I'm getting used to our current configuration I find myself confused.

  As I am connected to VMware Infrastructure Client, I click on help and VMware Infrastructure. He says the customer is build version 2.5.0 147704 and Virtual Center is 2.5.0 build 147633.

  When I look at my hosts, I see they are VMware ESX Server 3.5.0 176894

  My question is, how do I update my hosts and also VMware Infrastructure, as appropriate.

  I'm a bit confused, because I went through a class for vSphere 4 and I'm trying to understand the differences between the two.

  Welcome to the Forums-Yes, it's confusing ESX 3.5 and Virtual Center 2.5 are the previous version of the flagship product of VMware and were components of Virtual Infrastructure 3, also called VI - 3 - with the release of the new version of VMware brings everything up to a common version 4 number so ESX/ESXi is now version 4-Virtual Center is now version 4 as well and has a new name vCenter - and are components of vSphere - love anywhere with the software updates you get the better performance and new features such as VMware Fault Tolerance, distributed switches, 8 vCPUs and 256Go maximum for virtual machines.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Confusion with the file system OCFS2 OCR and voting disk RHEL 5, Oracle11g,

  Hi all
  
  I am trying to install the Oracle 11 g 3 node RAC database
  
  The environment on which I must make this implementation is as follows:
  Oracle 11g.
  Red Hat Linux 5 x 86
  Oracle Clusterware
  ASM
  Storage EMC
  250 GB of disk storage.
  SAN
  
  From now on, I am installing Oracle Clusterware on 3 nodes.
  
  I performed these tasks for cluster installations.
  
  1 configure the kernel parameters
  2 configure the user limits
  3 edit the /etc/pam.d/login file
  4 set up the groups and users to the operating system for Oracle Clusterware
  5. configure the environment Clusterware Oracle owner
  6. install the rpm CVUQDISK package
  7 configure the Hosts file
  8. check the network configuration
  9 configure SSH on all the Cluster nodes (equivalence of the user)
  9 enable SSH on all the Cluster nodes (equivalence of the user)
  10 installing Oracle Cluster File System (OCFS2)
  11. check the Installation of the (OCFS2) Oracle Cluster file system
  12 set the OCFS2 (/ etc/ocfs2/cluster.conf)
  13 set up the stack of Cluster O2CB for OCFS2
  
  BUT, here again the after that I'm a little confused on how to proceed. The next step is to format the disk and mount the OCFS2, directories of software... so, create etc.
  I asked my administration system to provide me with two partitions so that I could get in shape with the OCFS2 file system.
  
  He wrote telling me.
  
  * "Is what you want before I do it?" *
  
  * / dev/emcpowera1 is 3 GB and OCFS2.* format
  * / dev/emcpowera2 is 3 GB and OCFS2.* format
  
  * Those who are big enough for you? If not, I can re-size and re - format the *.
  * before I climb on the servers.*
  * the SAN is shared storage. / dev/emcpowera is one of the three LUNS on *.
  * storage is shared, and it is 214 GB. At the moment there are only two *.
  * partitions on it - the ones I have listed below. Can I repartition the LUN everything *.
  * as you want it.*
  * Where do you want that these climbs to: *.
  
  * / dev/emcpowera1 *.
  * / dev/emcpowera2 *.
  
  * I thought if this mounting technique would work as follows: *.
  
  * emcpowera1: / u01/shared_config/OCR_config *.
  * emcpowera2: / u01/shared_config/voting_disk *.
  
  * Let me know how you would like that mounted. » *
  
  Please recommend me what I should pass so that I can ask him exactly the same.
  
  My second question is, as we use the DSO, for which I'm going to configure ASM after clusterware installation, do I install Openfiler?
  PLS, check the environmental information that I provided above and make recommendations.
  
  As of now, I am using Jeffery hunters guide to install the entire installation. You think the installation guide everything is fine with my environment?
  http://www.Oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
  
  Kind regards
  MK

  Hello Lawrence,.

  Thank you.

  Mark this question as answered.

  See you soon,.

  Rodrigo Mufalani
  http://mufalani.blogspot.com

• confused with the Page, AbstactPane, and GroupDataModel

  Hello

  I have an application that has 3 receptacles showing different content (2 show an html page, 1 to GroupDataModel).

  The pages of the interface user is written in QML, but I create the page in C++ and fill it there. Here are the important parts of my code:

  // applicationUI.cpp
  
  Page* ApplicationUI::doLoadPageDetails(QString fn) {
  
    QmlDocument *qml = QmlDocument::create("asset:///PageDetails/PageDetails.qml").parent(this);
    qml->setContextProperty("app", this);
  
    qml->setContextProperty("minutesData", &AMinutesData);
  
    Page *newPage = qml->createRootObject();
  
    AbstractPane *root = qml->createRootObject();
  
   GroupDataModel *contactModel = root->findChild("contactModel");
  
  // ------ FILL PAGE WITH CONTENT
  
    Application::instance()->setScene(newPage);
  
    return newPage;
  }
  

  Now I open a file from the file Explorer directly all information is displayed in the application as supposed, but the back button is missing.

  When I remove the AbstractPane the back button is there, but of course in my GroupDataModel contacts are not shown. Can someone tell me how I can integrate the GroupDataModel to my user interface without losing the back button?

  Or why the back button is missing when I use a component summary here? Because the AbstractPane is not a back button and then "crush" the back button?

  Very well. I "solved" the problem by going in a different way.

  I've written a C++ function that gives me a GroupDataModel.

  Can I fill this GroupDataModel with the content and call the C++ function in QML.

  It is all described here:

  http://deanlogic.com/blog/2013/09/20/DataModel-change-trigger/

• "failure to communicate with the server" related to the vCenter mode

  Hello

  I have two vCenter servers connected in bound Mode.

  On both, I created the same files (via the computers view virtual and models) and the same permissions for the same ad groups.

  When I connect with a user (belong to the relevant AD Group) for vCenter2, I can see the vCenter1 and vCenter2, with the respective folders.

  However, when I connect to vCenter1 (with the same user), I get an error message:

  "There are problems with contacting the following vCenter server:

  "vCenter2: failure of authentication with the server.

  And there's a message in red on the lower right: 'No 1 vCenter Server not connected.'

  My DNS is set up perfectly. I can't do a ping on each vCenter server at once.

  Someone has an idea of what could be the problem?

  Thank you

  Yaniv

  We received the error message was "Failure to authenticate" and "vCenter server not connected" in the lower right corner of the client vSphere for all non-local Windows administrators.  After much research (VMware documentation bad lack), it was determined that one has been denied logon session on the server vCenter Server 4 Type as recorded in the security of the Windows operating system event log.  Connection type 4 is log on as a batch job.  After you apply this permission within the vCenter server's local security policy both (or all), non admin users were able to bind several instances within a single client vSphere vCenter Server successfully.

  Again, this is something that should be held responsible for the VMware documentation.  The delegated admin model is not intended for all operators of vCenter working with local administrative privileges on the vCenter server.

• confusion with the analytical functions

  I created an example where I am right now with the help of analytical functions. However, I need the query below to return an additional column. I need to return the result from:-' factor_day_sales * max (sdus)'. Any ideas?
  
  If the first column is located and must have the following results
  
  777777, 5791, 10, 1.5, 15, 90, 135, 7050
  
  the 1350 is the result, I don't know how to do. (some how to multiply factored_day_sales max (sdus) 15 470 = 7050

  create table david_sales (
  pro_id number(38),
  salesidx number (38,6),
  tim_id number(38));
  
  truncate table david_sales
  
  create table david_compensations (
  pro_id number(38),
  tim_id number(38),
  factor number(38,6));
  
  
  insert into david_sales values
  (777777, 10.00, 5795);
  insert into david_sales values
  (777777,20.00, 5795);
  insert into david_sales values
  (777777, 30.00, 5794);
  insert into david_sales values
  (777777, 40.00, 5794);
  insert into david_sales values
  (777777, 100.00, 5793);
  insert into david_sales values
  (777777, 10.00, 5793);
  insert into david_sales values
  (777777,80.00, 5791);
  insert into david_sales values
  (777777, 10.00, 5791);
  
  insert into david_compensations values
  (777777, 5795, 1.5);
  insert into david_compensations values
  (777777, 5793, 2.0);
  insert into david_compensations values
  (777777, 5792, 1.0);
  insert into david_compensations values
  (777777, 5791, 1.5);
  
  
  
      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj 
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795

  Thanks for looking

  Is that what you want?

      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj
      , (s.salesidx * NVL(c.factor, 1) * sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id))
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795
  
  SALES_PRO              COMP_PRO               SALES_TIM              COMP_TIM               DAY_SALES              FACTOR                 FACTORED_DAY_SALES     SDUS                   SUMMJCJ                SUMMEDMULTI
  ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ---------------------- ----------------------
  777777                 777777                 5791                   5791                   80                     1.5                    120                    90                     135                    10800
  777777                 777777                 5791                   5791                   10                     1.5                    15                     90                     135                    1350  
  

  I get the 1350

  or did you mean:

      SELECT  s.pro_id sales_pro
      ,       c.pro_id comp_pro
      ,       s.tim_id sales_tim
      ,       c.tim_id comp_tim
      ,       s.salesidx day_sales
      ,       NVL(c.factor, 1) factor
      ,       s.salesidx * NVL(c.factor, 1) factored_day_sales
      ,       sum(s.salesidx                   ) over (partition by s.pro_id order by s.pro_id, s.tim_id) Sdus
      ,       sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id) sumMjCj
      ,  s.salesidx * NVL(c.factor, 1) * (sum(s.salesidx * NVL(c.factor, 1)) over (partition by s.pro_id order by s.pro_id, s.tim_id)) summedMulti
        FROM david_sales s
        ,    david_compensations c
        WHERE s.pro_id    = c.pro_id(+)
        AND s.tim_id      = c.tim_id(+)
        AND s.tim_id     BETWEEN 5791  AND 5795 
  
  SALES_PRO              COMP_PRO               SALES_TIM              COMP_TIM               DAY_SALES              FACTOR                 FACTORED_DAY_SALES     SDUS                   SUMMJCJ                SUMMEDMULTI
  777777                 777777                 5795                   5795                   10                     1.5                    15                     300                    470                    7050
  

  Note, in the second block, I changed it just to use sumMjCj instead of sDus which seems to correlate with what you wanted (15 * 470 = 7050) while sdus is 15 * 300 = 4500

  Published by: tanging on December 11, 2009 06:17

• Try to change the broad relative to the absolute site link

  Using dreamweaver CS6. Originally we made a deal although our website using paypal buttons. Now, I created a market on shopify I want to use instead. I try to use the function 'replace site wide link' but he won't let me replace my link of ' / market "to a link absolute www.shop.mydomain.com so I'm stuck looking for answers other then going to each page of my site (more than 50 pages) and re connecting things. Help please!

  Make sure to save your files from local site first.  There is no cancellation if it goes terribly wrong.

  Use find and replace (Ctrl + F)

  All of the Local Site

  Source code:

  Search:

  Replace: http://www.shop.mydomain.com/

  Press the replace ALL.

  Nancy O.