Confusion of Acer Aspire ZC-605-ss20 façade.

Similar Questions

• Acer Aspire Z3-605-UR20 Memory Specifications

  I recently bought an Acer Aspire Z3-605-UR20. Online data sheet says I can go to 16 GB of memory. I'm having a hard time to determine the exact type of memory compatible with my machine. Can someone help me to limit?

  Hi eschenbacher!

  Download & install Crucial Scanner . This program will tell you exactly what RAM you need and make recommendations for you.

  The link is to the site of the United Kingdom, but you can put your country by clicking on the flag in the upper left corner of the page.

  I hope this helps!

• Acer Aspire XC-605 impossible to update BIOS

  I downloaded the latest BIOS for my Acer Aspire downloads to update Acer XC-605.

  My computer came with the P11 - A2 version and the newer version is P11 - A3L.

  I created a USB boot disk using the disk USB HP and everything seems to work fine. However, when I tried to Flash the BIOS using flash.bat I get the following message:

  ERROR: File Rom ROMID is not compatible with the existing BIOS ROMID

  What I am doing wrong?

  Hello

  In this case, you can upgrade the bios but only under DOS (as you tried).

• Acer Aspire XC-605-DT. I want to change the rat of 220v, 33 bis for an a 110v power source. What to buy?

  I would change the power supply from my computer, whose power is 220v-240v, 2A, 50 Hz for a new one that works with 110v. What power supply should I buy.

  Thank you

  Yes, it's this one. I can't find any information. As you can see, I am french and all products are normally multi votage.

  To be sure, I recommend you contact (very friendly) french support by chat or email. You have the right information about your case.

  I wish you a safe trip home.

• Need still restarts desktop Acer Aspire - keyboard not detected at the login screen

  Hello

  I have Acer Aspire ATC-605-UR13.

  In the course of the last 4 weeks, suddenly the keyboard is not detected at the login screen. The mouse works.

  Still, I have to restart to make the keyboard work.

  Any idea of what caused it? Perhaps any software installed that do?

  P.S.: Btw, I tried a new keyboard, the same behavior. I have concluded that this is not the keyboard.

  Thank you!

  This problem has been reported after that install some recently released update of windows... Currently the ability to perform a restore of the system to an earlier date. You can also try to uninsatlling updates of windows manually from Control Panel > windows update.

• Aspire XC-605 Downgrade from Windows 8 for Windows 7

  Hi people,

  I need quick tips on a desktop PC Acer Aspire XC-605 and hope you can help me. My boyfriend just bought an Acer Aspire XC-605 for his family to use. It comes with Windows 8, but he hates this OS. He called me yesterday and asked if I could "downgrade it" to Windows 7 as I'm a bit geek with PCs.

  But I read a horror story about someone who wants to downgrade an Acer Aspire XC-600 and it seems very simple not => so I expect the same thing to a XC-605. (I'm trying a bit of research before plunging).

  Here is a summary on how to get Windows on an Acer Aspire XC-600 from this post:

  1 completely turns off your computer.

  2. turn on the system. As soon as the first logo screen appears, immediately press DELETE to enter BIOS.

  3. use the right arrow key to select the authentication.

  4. with secure boot is highlighted, press ENTER, and then press the arrow down to select the people with reduced mobility.

  5. use the right arrow key to select Boot Options.

  6. with CSM launch highlighted, press enter and use the arrow down to select always.

  7. press ENTER.

  8. press on the F10 key to save the changes and reboot the system

  9 re - enter the BIOS by pressing DELETE and go to the Advanced menu.

  10 go down in the Integrated Peripherals menu.

  11 change onboard SATA Native IDE mode.

  12. press on the F10 key to save the changes and reboot the system

  By doing this, you can, since the Win7 DVD, delete all existing partitions and not all errors not being able to install on this HARD drive.

  After installing Win7 the only drivers Win7 not found were the wired LAN, card reader Realtek USB and SM Bus controller. (On the XC-600)

  My understanding is that Win 7 use Win drivers 8 without a problem. So I used the devices I've found a similar driver on the Acer Aspire XC-605 issue.

  That computer has SLIC 3.0, & Secure Boot UEFI, is why a full erase of the HDD is required; as with UEFI (Unified Extensible Firmware Interface) & Secure Boot-online Bios "wife" the hard to the motherboard. At least that's what I discovered to date. I generally supported the recovery partitions on OEM boxes like an insurance-online just in case that something goes wrong, and I can't install the desired OS. Of course wipe everything clean denies this useful backup. Comments please?

  PS - I forgot to mention that my boyfriend he filed yesterday afternoon while I was helping my mom with lights. He was still in the box.

  The box was brand new! -It never has been started! I couldn't believe he didn't even try to make 8 on this so I called him again, and he said he was certain that he would not win 8. So I did the same as above for a XC-600 and it blew.

  However if you replace onboard SATA Native IDE mode as shown above in 11, Windows will not let you install from a USB key as it crashes during the expansion of the files to 1% on the XC-605. If you use a disc of 7 win he advises you immediately after you size the partition to the OS and tell him to install there, that the drive is not configured in the Bios to be Bootable. He definition back to ACHI authorized Win 7 must be installed on the disk (I didn't try the Stick but this probably would have worked as well).

  There were a few more necessary than the XC-600 above - drivers so I installed all drivers 8 Win from the Acer site, and they all worked, but there is only one device listed in the Device Manager, under other devices-online (USB) Universal Serial Bus controller that has a yellow triangle next to him. He doesn't have a driver that are associated with and Windows Update does not find it. I find it strange that he sees it as a USB controller because as all USB ports now operate. I think that Windows has erred in the detection of this device so I am headed in that direction now.

  I tried the function of automatic detection of Acer and it says to activate a Bluetooth, Lan and Wireless LAN and try to detect again. So I enabled the wireless connection, (one is connected to Wired?) but I'll try to find something Bluetooth to turn on that, but I think it's just a Kipper.

  I hope someone will chime and advise how to determine this last device is before I get all my hair...

  Thanks for reading...

  I went to Intels here and download a new Chipset for windows 7 (chipset 10.0.13 PV installation). That will fix the problem with (USB) Universal Serial Bus controller. Triangle yellow no more... I hope it works for you 2. /Kak PC-SUPPORT Sweden

• I recently bought an Acer ATC Aspire TC-605-UB11 desktop computer; I need help setting up a 2nd monitor

  Recently, I replaced my desktop with a new Acer Aspire TC-ATC-605-UB11 model. I moved the old system to the new video card (work), but I can't find a way to allow the 2nd video card. I know that sometimes there are BIOS settings that need to be addressed, but I don't see anything that looks like what I need.

  A few details: the video material for my Acer is the Intel(r) HD Graphics 4600.

  I am away from the system at the moment and do not remember the details of the video card inserted. I get that if requested.

  I suspect that there is a framework to enable multiple monitors (I worked with before similar systems) or else the Acer does not simply another video card (maybe interruptions or other limited resources?). If this is the case, is there an option to use a USB "video card" instead?

  Thanks in advance for answers!

  What is the model # of your graphics card you are trying to install?

  What version of BIOS is installed on your computer?

  The link below shows you how to use the mode and the clone desktop mode extended (for two monitors) with your HD4600 graphics supplied with your computer.

  http://www.Intel.com/support/graphics/sb/CS-031026.htm

  Try to remove your video card and see if you can get the HD4600 to provide support for multiple monitors.  I have install 2 monitors with my TC-605.  A monitor is attached via HDMI and the other via VGA.

  To check your BIOS version on the Windows 8.1, right click on the Start button, left click on 'run '.  Type msinfo32, and then click OK

• Acer remote unable to wake up sleep Aspire XC-605

  I've set up my Aspire XC-605 as an AcerCloud and it works fine, I can access my files with my iPhone and Android devices while the XC-605 is on, but not in mode 'sleep'. In the Acer remote control panel, if I check the box 'Allow to wake the computer', I get a "error: 205" and the box will not be checked.»

  I have all the updates, except the BIOS. Updating the BIOS will solve this, or is there something else, I'm missing?

  Thank you!

  HiBeeSee,

  Since there is no new version Acer BYOC Apps, I sincerely recommend upgrade you Acer BYOC Apps to the latest version for the best service experience Acer BYOC. After update applications, please try running Acer always connect again, check to see if the error 205 is still appear.

  Note: you can enable or disable the Acer always connect to the portal of Acer.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Mega problemo Aspire XC - 605

  Aspire XC 605, 64B WIndows 8.1

  It does not create new folder option in Explorer. It is possible to open for example 7-zip, who also has an overview of the folder and create a folder by using this app, but windows Explorer does not. And running sfc/scannow in cmd shows 100% integrity. Recently bought computer.

  Update or uninstall Visual C++ 2012 or 2013 is impossible. The process get stuck after 3 seconds and just stays there.

  Trying to install an old game like Star Wars Battlefront installation CD is the same, Installer crashes after 3 seconds and do not respond.

  Then... What are the drivers of Acer to install Windows 7 on this PC?

  Only problems with the drivers were Intel USB 3.0 controller driver eXtensible host, the AMD Radeon graphics driver and the Ethernet controller. Intel website was the first. The second site Web of AMD.  And the third could be found by searching googling and the hardware of the device ID it...

  And Windows 7 works better.

• Upgrade Windows 8.1 of Windows 7 Home Premium on Acer Aspire X1420G Compatible question?

  Upgrade Windows 8.1 Windows 7 Home Premium on Acer Aspire X1420G Compatible issue with UEFI followed the v2.3.1 Errata B and has the authority of Certification Microsoft Windows in the base of signatures UEFI

  What I have to do a clean install of Windows 8.1? I'm confused - why this

  You can upgrade to 8.1 windows, don't worry too much about secure boot, it's just a Windows 8.1 security feature and it will not harm your pc.

  Can you please check your BIOS version?

  at startup, press DELETE, and check the BIOS version, must be something like P01. B4

• Acer Aspire V15 Nitro replace SSD HARD drive

  I bought this laptop in March 2015. This laptop comes with 1 TB of HDD.

  I wanted to replace the HDD SSD but I called the service center (Service of Highpoint), Acer technician told me that there is no way to replace with SSD because the port is different, any SSD can also compatible with this laptop HARD drive port.

  This make me very confuse because I search in google, replace with SSD is quite possible.

  So I'm here to ask for advice. Hope can get a response. Thank you.

  Published:

  My laptop model: Acer Aspire V15 Nitro Black Edition (VN7 - 591 G)

  -Core i7 4710Q

  -12 GB OF DDR3 RAM

  -HARD DRIVE 1 TB

  -NVIDIA GeForce GTX 860M

  you have 2 options on your laptop:

  (1) switch for one SSD 1 TB HARD drive

  (2) add an SSD on form factory M2 on its location (top-left, near the fan), so you can have installed SSD and HDD

  the second option, other users have done so, and sometimes they have had some problems during the recording of the SSD as first boot device (or window Boot Manager), since the BIOS tries to boot from SATA port.

  You can force it by pressing F12 at startup and select the appropriate boot device.

  It is up to you.

• Aspire AT3-605-UR20 has available PCIe slot?

  I looking to buy several Aspire AT3-605-UR20 as workstations, but plan to add spare parts video cards.

  Product page:

  http://us.Acer.com/AC/en/us/content/model-datasheet/DT.SPYAA.001

  These machines have an available PCIe slot?  I guess that they do, but would like confirmation.

  Thank you

  Looking at this link, clearly staes further down on the page it has a x 16 pci slot for a video card.

  http://www.Newegg.com/product/product.aspx?item=N82E16883103817

• I have a DATE TIME / CMOS / BIOS with my Acer Aspire 5742Z problem

  Hello

  Newbie here...

  I have a strange problem with my Acer Aspire 5742Z (UK), which I think may be the BIOS or CMOS area...

  MAIN PROBLEM

  Guard reset BIOS default time (00: 00:00 on 01/01/2009)... OR... a time '' close '' to what it is supposed to be...

  MAIN STEPS IN THE DEMONSTRATION OF THE ISSUE...  WHAT I'VE DONE

  Removed the main battery and then replaced the CMOS battery twice (in the case of a failure)

  Main battery insert it again.

  The clocks of the BIOS (using F2) countless times, but there's rarely / or is correct.

  STRANGENESS...

  During startup in Windows 7, it almost always does not show the same date and time that I entered the BIOS.

  For example, if I go home at 21:35 on August 28, 2014 using F2, when I boot on Windows, the date and time may say August 23, 2014 at 3:25 pm ish...

  POWER OFF

  If I turn it off and turn off and then turn on, restart the time in BIOS is correct... to 21:43 29/08/2014 (that I have record for good measure).

  If I continue, Windows reads now August 23 at 15:32

  ADJUST the WINDOWS TIM E (UK)

  So, then I change the time of Windows Date to Friday, August 29, 2014 21:48.

  JUST FYI: the PARAMETERS of ZONE SCHEDULE are checked and no changes: (UTC), Dublin, Edinburgh, Lisbon, London

  PANEL, LANGUAGE AND REGION, English in the United Kingdom, short time 21:48, short Date: 29/08/2014

  GEOGRAPHICAL area: United Kingdom

  now, everything seems correct.

  TURN OFF AGAIN and wait a few minutes.

  YOU turn it back ON, and then press F2 that (this time) shows the BIOS default date and time in 2009

  If I continue in windows without changing the BIOS date and time dafault, Windows now displays as 23:02 31/12/2008

  :-(

  That's all.

  I would really appreciate help fixing this problem that makes me nuts!

  Thanks in advance!

  ...   Just in case anyone reads this...

  I just updated my BIOS for the next issue, and the problem has.

  I guess that maybe the BIOS got corrupted!

  I used the simple approach and no short layout has been involved.  I deliberately did not go for the latest BIOS just in case where he brought new questions and confused the situation.

  Shaba

• Can not find the SSD Aspire MT3-605

  In Windows Explorer, I can't find the 24 GB SSD, which is supposed to be in the desktop Aspire MT3-605-UR24. I also tried to find the SSD drive in Device Manager. How do I see it so that I can actually use it?

  

  so. I'll answer my own question. First a little history: after two calls to the Acer support, trying to understand English with a dialect, I was transferred to tier 2 support. They sent me a shipping label to send my pc in Texas, which is about 2,000 miles from here where I live. Also asked me to burn backup discs. Well, Win8 does not burn backup discs. Only a USB is an option with Win8 (this has been verified using windows help). Do not feel all warm and fuzzy about this option, I thought taking a gamble and call the place I bought the pc (online store). After a brief conversation, I was sent an RMA label to send the pc back. No problem. They would simply send me a new. Better idea, but still some reservations since I had loaded the Suite MS Office Pro 2013 and wouldn't argue with MS to re-use the product key. So off to the internet to find others lost souls with a problem of similar sounding and suggestions.

  So the answer?  The SSD on my AT3-605 UR24 is alive and well. It's a system used MBR only drive by the operating system. It is not expected to be an accessible player of the user.  It can be found in

  Panel > system security > administrative tools > computer management > storage > disk management.   And there it is!  Alive, healthy and working properly.