Fable III - impossible to contact the key server
So I waited 2 weeks for the next key on steam. After reading the discussion forums here I think Microsoft has a better answer as to when the keys would come. As Lionhead studios and Steam are obviously not in charge of the distribution of the keys, I was wondering if someone here at Microsoft could provide any information on this problem. Thank you.
Hello
Contact the activation service for more information on the same.
How to obtain a new product key for Microsoft Games for Windows
Thank you.
Tags: Windows
Similar Questions
-
When I "play to" my TV, it stops at "contacting the media server.
I have a laptop XPS L520X with Intel Core i7 2630QM, 6 GB of RAM and Windows 7 Professional.First of all, I was able to play songs or videos on my Sony Bravia KDL32 EX720, using the "play to". (although not now)
I can still play them if I access it from my TV.If I try to play a video using 'Play To', I get the message "contacting the media server" and nothing happens. (I can play the video even if I do it through my TV).I think my TV is a DMR (Digital Media Renderer) because as mentioned I could "play to" earlier.I tried:1. How do I remove my computer from the list of TV and then add it again.2. how remove my Windows Media streaming player TV list and then add it again.Hello Arpit Chauhan,
· Have you tried to play the files other than .mp2, .mp3 and .mp4 file types?
Follow the suggestions below for a possible solution:
Method 1: You can follow these steps and check if the voila.
a. closed Windows Media Player 12.
b. go to Services [->Control Panel->system and security->Administrative ToolsServices]
c. find the service named "Windows Media Player Network Sharing Service"
d. stop the Service manually.
e. Locate the "UpnP device host"service. Stop the service and the Start again.
f. run "Windows Media Player Network Sharing Service" now.
g. close windows all associated and the Panel. Open Windows Media Player... right click on a playlist and see if the Play option lists the TV.
Try to play now and check if it works.
Method 2: If you try to install the game then I suggest you to install in clean boot state and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.
Method 3: I suggest you to temporarily disable the antivirus software (and any other security software) and the firewall on the computer and see if that fixes the problem.
Caution:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Let us know the results.
-
GET VPN - error on the key server
Hello:
When I apply a Crypto GDOI card to outgoing interface on the KEY SERVER, I see the following error message:* 1 sep 19:46:07.707: % SYS-3-MGDTIMER: uninitialized timer, set_exptime, timer = 493007 B 8. -Process = "Exec", PW = 0, pid = 202, - traceback = 0x43220180z 0x43E49EA0z 0x43D8A89Cz 0x43DAE5DCz 0x43D907BCz 0x419ACEC4z 0x419D2F4Cz 0x43215824z 0x43215808z
This causes the crypto isakmp phase I to come. There are also IPsec SA of Phase II on the Member of the Group and is to encapsulate traffic. However, on the key server, I don't see that any SA Phase II IPSec defined.
I checked the same behavior on two different IOS routers acting as a key server.
2801 > sh ver
Cisco IOS software, 2801 Software (C2801-ADVSECURITYK9-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)
2811 > sh ver
Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (24) T4, VERSION of the SOFTWARE (fc2)
I have generated RSA key pairs, defined in the ACL mirrored, static routes, isakmp, ipsec (including the transformation game) etc. correctly profile. The configs for the Group GDOI is as follows:
gdoi crypto group GDOI
Identification number 1
local server
generate a new passkey mypubkey rsa GDOI
generate a new key transport unicast
1.1.1.1 ipv4 address (interface WAN IP)
his 10 ipsec
match address ipv4 GDOI
Profile GDOI
!
card crypto GDOI 10 gdoi
set the Group GDOI
!
It was working a week ago and just started to happen. It is an off-production area. I'm stumped and looking for someone with answers. I don't see problems on BugKit tool from CISCO.
Thank you
Brian
Well a KS cannot be a GM to itself if your configuration it incorrectly. You said that it worked, but I don't see how it could have been. A KS should be a stand-alone router, do nothing, but acting as the KS for the GMs GET.
-
My desktop app says impossible to reach the Adobe server.
My desktop app says impossible to reach the Adobe server. Someone else has had this problem. I can't access apps to download?
Hi Bunglefoot,
We just got an update on the Adobe website have a server problem. We hope to get it fixed as soon as POSSIBLE.
You should still be able to launch your applications from the shortcuts
Kind regards
Chirag
-
Cannot use Adobe CC, guests 'impossible to reach the Adobe server.
Cannot use Adobe CC, guests 'impossible to reach the Adobe server. Help, please.
Please see can't use Adobe CC
(Double Post)
-
I want to upgrade to adobe reader 10.1.1 and when I tried to download/install with Internet Explorer it produces: unable to reach the trackers. Computing has opened another page web and product:
Adobe Reader has not installed successfully
You can troubleshoot your installation with the following resources:
- Impossible to download or install the player?
- Troubleshoot the installation of Adobe Reader. Windows
- Reader Help and Support Center
- Community aid
- Frequently asked questions
When I go to control panel > Add Remove Programs: adobe reader 9.1.3 is 138 MB and when I click on remove this product: the patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
(1) how to uninstall adobe reader 9.1.3 with this problem?
(2) I installed revo unistaller and have not yet learned how to use it. That's what I need to uninstall reader 9.1.3 or is there something I need to download in order to then use Add Remove programs and it uninstalled?
(3) I would like to install the latest version of adobe reader and the produced download/install: failed to contact the trackers. What this means and how it be fixed so that I can download and install the latest version
Currently when I read or download PDF files they open properly with Adobe reader. It is the goal to eliminate the old version and install the new version.
My computer is a laptop inspiron 9400 with windows XP home SP3, 2600 Intel processor @ 1.66 GHz, 2.0 GB RAM, ATI Mobility Radeon 1400
The other Adobe software products installed are Adobe AIR and Adobe Flash Player 11 Plugin ActiveX Adobe Flash Player 11
I tired the download/install with a different browser (Safari) and he knew during initialization, downloading and installing please wait while Windows configures Adobe Reader X (10.1.1) then mandatory collection of information then time remaining dry 0 with all the blue squares. Set up necessary to restart your system you want to reboot now? I have choseno and when I saw Adobe Reader Installer it had Adobe Reader Installation failure unknown error 96% then I chose the finish. He then produced one of the facilities requires a reboot. You want to make now. I'll choose Yes and have it reboot.
What happened with the intall with Internet Explorer attempt that he had failed. If Adobe Reader X installs with Safari and PDF files open with this browser uses Adobe Reader X PDF files open with Internet Explorer using Adobe Reader 9.1.3? I would have just a version of Adobe Reader and do not have the hard drive space.
I'll reboot now and see what happens. What comments would you make about what to do if installation fails for Adobe Reader X and what comments can you make on how to uninstall Adobe Reader 9.1.3 too in addition to any other commentary on the problem of installing.
THX
I was able to solve this problem with the inability to uninstall adobe reader 9.1.3 and this program is now uninstalled by displaying the control panel > Add Remove programs.
It happened by chance using a battery of Microsoft Fix its. To tune up my computer I fell one fix after another and then found one that Troubleshoots installation and uninstallition problems.
http://support.Microsoft.com/FixIt/
Run now Learn more Diagnose and correct program installation and uninstallation of the problems automatically
Automatically diagnose problems that may prevent install and uninstall programs on your computer. Spend with programs that will not uninstall properly and blocks the installation of new facilities program.
He finds corrupt patch key of registry and fixed.
I chose the program that I wanted to uninstall and he managed to uninstall the old edition of adobe reader:
Program to install and uninstall troubleshooterPublisher details Problems found Impossible to install or uninstall a programCannot installation or uninstall a program Looking for problems that can stop you to install and uninstall a programFixed Uninstall and cleanup? Adobe Reader 9.1.3Succeeded Verified issues Key of registry corrupt Patch registry Patch keysCorrupt Detects the cacheChecked patch damaged or missing Problem registry keyProblem registry key Detects problems with the registry (issue of Wow64) checked Questions foundDetection details 6Cannot install or uninstall a programFixed Looking for problems that can stop you install and uninstall a program Uninstall and cleanup Looking for problems that can stop you to install and uninstall a program Questions checkedDetection details 6Corrupt registry Patch keysChecked Detects the cache fix corrupted or missing Patch registry Run of fixing problemsNot Detect the registry patch problems 6Problem registry keyChecked Detects problems with the registry (issue of Wow64) Fixing the problem registry key (problem of Wow64) does not work Find and delete the registry key for problem (problem of Wow64) Details of detection Collection information Computer name: A Windows Version: 5.1 Architecture: x 86 Time: 2011-12-10 10:19:52 Publisher details Convenience store program Install and Uninstall Looking for problems that can stop you install and uninstall a program Package Version: 1.2 Publisher: Microsoft Corporation -
Impossible to contact your DCHP server
After resetting my modem 100 times (from support) re - install windows xp, buy a new card NETWORK, I always get the same error message when I do an ipconfig/flushdns, ipconfig/release and then an ipconfig / renew: "an error occurred during renewal of the connection to the Local network interface: unable to contact your DHCP server. Request timed out. "I am currently plugged into my laptop (which works very well, win7) but as soon as I have the plugin on my desk (before I do a complete factory reset of the modem) I get no internet activity. There is no router in question, just a modem (RCA, model: DCM 425). I've been through 20 different blogs and I can't understand what the problem is.
ipconfig/all the result:
Hostname:... juby-qvfgt3vlfm
Dns suffix... :
Node type: unknown;
IP Routing Enabled: no
WINS proxy enabled: noThe connection-specific DNS suffix:
Description: Basis of Sis 900 PCI Fast Ethernet adapt
Physical address: 00-01-80-6A-E2-F3
DHCP enabled: Yes
Autoconfiguration enabled: Yes
Auto configuration: IP address: 169.254.247.88
Subnet mask: 255.255.0.0
Default gateway:I was running XP SP3 until I reformatted. I'm currently under SP1. I disabled my motherboards NIC and plugged in the new. Still get the same results as I was before I reformatted. As I said, the laptop works very well. When I got the modem it was connected to my desktop computer with limited connectivity or not. As soon as I plugged into my laptop, it is up in a few seconds. Any ideas?
Thank you
JustinMake sure that your DHCP Client service is running...
Start the Services (start-> Run-> "services.msc") window, then look for a line called "DHCP Client". Make sure that the status column is "Started" and Startup Type column is "automatic". If not, double-click this line and do it this way.HTH,
JW -
Impossible to contact your DCHP server - what now?
I can not connect to wireless internet. I have the IP address of 169.254.102.28. When I release and then try to renew the IPFichier I get the following message
No operations can be performed on the connection to the Local network, although it has its media disconnected.
An error occurred while renewing interface wireless network connection: unable to contact your DHCP server. Request timed out.Computer recently crashed and had to use the recovery disc. Before that no problem with the connection, and since then cannot connect wireless but have no problem with the ethernet connection.
Wireless is by means of Intel PRO/Wireless 2200BG Network Connection Version 9.0.2.3.1Thank you Shawn
In fact, I uninstalled the driver and reinstalled and that seems to fix the problem. I had already checked, I got the latest driver and it was installed but which seemed to fix it.
-
Cannot contact the DNS server?
Microsoft Windows [Version 6.0.6002]Copyright (c) 2006 Microsoft Corporation. All rights reserved.C:\Users\Rafael>ipconfig/allWindows IP configurationName of the host...: HomeVista-PcPrimary Dns suffix...:Node... type: hybridActive... IP routing: No.Active... proxy WINS: No.Ethernet bridge network adapter:The connection-specific DNS suffix. :... Description: MAC bridge MiniportPhysical address.... : E2-46-9A-B1-C5-67DHCP active...: No.Autoconfiguration enabled...: YesIPv4 address...: 192.168.1.124 (Preferred)... Subnet mask: 255.255.255.0.... Default gateway. : 192.168.1.1.DNS servers...: 75.75.75.75NetBIOS over TCP/IP...: enabledCard tunnel Local Area Connection * 6:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 17:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 2:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 3:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Teredo Tunneling Pseudo-InterfacePhysical address.... : 02-00-54-55-4E-01DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 5:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 7:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 9:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0Active DHCP.... : No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 11:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description...: isatap.hsd1.il.comcast.net.Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 12:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Adapter Microsoft ISATAP #8Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled.... : YesI can't connect to the internet for a reason any. I diagnose and fix, but it was not connected to the internet that it says can not connect to the primary dns server? Help please and thank you.Hello
(1) do you have made no changes before this problem?
Method 1: Wi - Fi and network in Windows http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows connection problems
You can see the link mentioned below that can help you in the matter of fixing. The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 2: You can try to contact the Internet (FSI) Service provider to reset the settings of the router.
Hope this information helps.
-
Impossible to reach the Adobe server
Hello
We have a problem with the connection to adobe CC.
We already checked a few sons but unable to solve our problem.
FYI, connect you to the internet via the proxy server / win10
Here is the error.
Please check the advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications
Other references are:
Impossible to reach on the Adobe servers, please check the firewall settings and try again
Unable to connect to the Adobe Creative Cloud Server
Cloud cannot create arrived on Adobe servers.
Concerning
Stéphane
-
Found an iPhone 6, impossible to contact the previous owner
So I found an iPhone 6, basically when I turn it on I'm greeted by the usual configuration process, but it has activation lock and I can't contact the previous owner because I can't have his email address. The closest thing to I have information regarding the owner is this picture down below. My question is how can I contact the previous owner?
Give it to the local police.
-
Impossible to use the keys FN on my Satellite S50T-A-10Z
H?
I have a Toshiba Satellite S50T-A-10Z. I've recently updated the BIOS. After the update, I realized that I can not use the FN keys. And also I can't turn off my keyboard background light.
Before the update, I was able to do by pressing on FN + z. help, please!
Hello
As far as I know keyboard light can be turned off in the BIOS directly. You will find this option?
Have you tried to change function key mode in Control Panel > keyboard?
Please try to change this mode to the standard F1 - F12 (you have to press the FN button) mode and check if the problem persists. -
Impossible to use the keys on the Satellite P300-172
Hello
so I was cleaning my laptop Toshiba, last week and after accidentally on the touch keys it started my computer, I thought nothing of it because it s happened before, but for some reason, the buttons have now broken and is no longer reacts to the touch and so they are now constantly switched on, it's embarrassing on several levels 1 was that it drains a lot on the battery, the light, he puts off tension during the night is very annoying and especially I can't turn off cos t work, they won, so I can no longer use the touch keys
If any1 knows how to fix this please post an answer
Thank you
Try to roll back of day of the BONE or two back. Maybe this will help.
It can be done with the System Restore tool. -
Satellite L300 - 17L - impossible to use the keys FN under Win XP
I recently bought a Toshiba Satellite L300 - 17L and I can't use the combination of keys (Fn + F1, F2...).
I downloaded all my drivers Toshiba s website... but nothing... all utilities... and nothing.
I use a Win XP OSPlease, if you can help me...
Hello
As I m wrong not the Satellite L300 - 17L belongs to the PSLBCE.
You must choose this series to download driver.I can find on the European driver Toshiba page all the necessary XP drivers for this series and as much as I know to install the * Modules * common for Win XP get the FN keys feature!
If please check this and reinstall the common Modules!
Good bye
-
Hello
I'm recovering emails from my email to the Inbox of Microsoft Exchange Server.
I tried with integrated workflows 'retrieve messages (via MailClient)"located under the Library/Mail. But I got the error message "connection failed" when running the threshold of this workflow.
myMailClient.connect (mail server, mailPort, mailUsername, mailPassword);
I use the pop3 Protocol and port 143. Please see screenshot below. Although I am able to send the email successfully through workflow 'sent the notification' in the library/mail folder.
I also tried with "imap" Protocol and port 25. It was also not working. I don't know why it doesn't work? Won't do anything in the input values?
Please help me.
Thank you
Miloud
The problem is resolved after you import the SSL certificate for devices.
Maybe you are looking for
-
How to change the iPhone camera shutter sound 7
How to change the iPhone camera shutter sound 7?
-
Airport extreme connectivity problems
I got in and out of trouble with my Airport Extreme, which is less than two years. I started to lose the connection to the internet for 4 months now. Now, I get different errors that my extreme is overheating and another mistake he lost the DNS infor
-
My iPad detects inactivity while I'm listening to a story. Then he slips into the mode "sleep" and interrupts the story. Any suggestions on how to avoid this?
-
How can I change the default font settings in windows?
Today
-
Impossible to find in outlook express6
Hello mates, I use outlook express 6, which is incorporated by the workstation with Windows xp. And have almost 61 gb of email data. every thing is working perfect, but when I try to find all the messages it displays nothing not nor emits no error. I