Mega problemo Aspire XC - 605

Similar Questions

• Aspire XC-605 No. bootable discs after update BIOS

  Hello

  I installed Windows 10 on my Aspire XC-605 yesterday. I couldn't take the noise at work after that. I saw in another discussion which was recommended to an update of the BIOS.

  So, I updated the BIOS to P11. B4. The update went well, no error reported. After reboot, I went into the BIOS settings and loaded by default such as recommended in the README file.

  However, my system does see a bootable hard drive. Whenever I reboot, I have this message: Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key.

  If I go into Advanced-> various in the BIOS, my hard drive is permanently shown in AHCI Port2. In Startup Options, the 1st boot device is set to the hard drive. But when I go into the hard drive priority, there is nothing listed at all.

  Any suggestions? I currently have a brick.

  Well, I'll be... I thought about it after several hours of maddening.

  I googled and found several stories similar to this error message, and all seemed to be driven to me who need active CSM. I noticed that the launch MSC BIOS setting was grey and set to 'Never' in the BIOS.

  I finally realized that disabling Secure Boot has allowed me to toggle the setting to run CSM. I then put it to "always". Everything seems to work now.

• Aspire AT3-605-UR20 has available PCIe slot?

  I looking to buy several Aspire AT3-605-UR20 as workstations, but plan to add spare parts video cards.

  Product page:

  http://us.Acer.com/AC/en/us/content/model-datasheet/DT.SPYAA.001

  These machines have an available PCIe slot?  I guess that they do, but would like confirmation.

  Thank you

  Looking at this link, clearly staes further down on the page it has a x 16 pci slot for a video card.

  http://www.Newegg.com/product/product.aspx?item=N82E16883103817

• Acer remote unable to wake up sleep Aspire XC-605

  I've set up my Aspire XC-605 as an AcerCloud and it works fine, I can access my files with my iPhone and Android devices while the XC-605 is on, but not in mode 'sleep'. In the Acer remote control panel, if I check the box 'Allow to wake the computer', I get a "error: 205" and the box will not be checked.»

  I have all the updates, except the BIOS. Updating the BIOS will solve this, or is there something else, I'm missing?

  Thank you!

  HiBeeSee,

  Since there is no new version Acer BYOC Apps, I sincerely recommend upgrade you Acer BYOC Apps to the latest version for the best service experience Acer BYOC. After update applications, please try running Acer always connect again, check to see if the error 205 is still appear.

  Note: you can enable or disable the Acer always connect to the portal of Acer.

• Can not find the SSD Aspire MT3-605

  In Windows Explorer, I can't find the 24 GB SSD, which is supposed to be in the desktop Aspire MT3-605-UR24. I also tried to find the SSD drive in Device Manager. How do I see it so that I can actually use it?

  

  so. I'll answer my own question. First a little history: after two calls to the Acer support, trying to understand English with a dialect, I was transferred to tier 2 support. They sent me a shipping label to send my pc in Texas, which is about 2,000 miles from here where I live. Also asked me to burn backup discs. Well, Win8 does not burn backup discs. Only a USB is an option with Win8 (this has been verified using windows help). Do not feel all warm and fuzzy about this option, I thought taking a gamble and call the place I bought the pc (online store). After a brief conversation, I was sent an RMA label to send the pc back. No problem. They would simply send me a new. Better idea, but still some reservations since I had loaded the Suite MS Office Pro 2013 and wouldn't argue with MS to re-use the product key. So off to the internet to find others lost souls with a problem of similar sounding and suggestions.

  So the answer?  The SSD on my AT3-605 UR24 is alive and well. It's a system used MBR only drive by the operating system. It is not expected to be an accessible player of the user.  It can be found in

  Panel > system security > administrative tools > computer management > storage > disk management.   And there it is!  Alive, healthy and working properly.

• Acer Aspire Z3-605-UR20 Memory Specifications

  I recently bought an Acer Aspire Z3-605-UR20. Online data sheet says I can go to 16 GB of memory. I'm having a hard time to determine the exact type of memory compatible with my machine. Can someone help me to limit?

  Hi eschenbacher!

  Download & install Crucial Scanner . This program will tell you exactly what RAM you need and make recommendations for you.

  The link is to the site of the United Kingdom, but you can put your country by clicking on the flag in the upper left corner of the page.

  I hope this helps!

• Aspire XC-605 Win10 upgrade

  Hello

  I'm under Win10 at work and love unlike 8.1 that I really hate.

  My Aspire XC-605 becomes quite slow on Win 8.1 (to the point that the operating system hangs sometimes for a minute no reason).

  He repeats in the 10 Upgrade Wizard is not ready for Win10.

  Are there drivers available and how can I force to upgrade?

  Also my Aspire XC-605 runs a weed i3 and 6 GB of ram, 1 TB on 8.1 x 64 drive. Is it possible to upgrade to i7 and 16 GB of ram?

  Any comments would be helpful as I would love to receive a ball of 8.1.

  I would say that your computer is messed up or if you have a virus... because you should get 10 windows... If something is definitely wrong with your computer

  1. try running with anti-malware software

  2. make a recovery USB disk to factory default

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/~/create-a-Acer-factory-default-backup-in-win...

  3. backup of files and reset your PC to factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-recovery-management-to-restore-you...

  4. it may ask you to upgrade to windows 10 immediately after your factory reset... or you may need to get all your updates Windows first.  And that can take some time.

  Acer has your drivers windows 10 here:

  http://us.Acer.com/AC/en/us/content/drivers

  I don't know if you need to update your BIOS because I don't have the model of your computer.

• Aspire XC-605 Downgrade from Windows 8 for Windows 7

  Hi people,

  I need quick tips on a desktop PC Acer Aspire XC-605 and hope you can help me. My boyfriend just bought an Acer Aspire XC-605 for his family to use. It comes with Windows 8, but he hates this OS. He called me yesterday and asked if I could "downgrade it" to Windows 7 as I'm a bit geek with PCs.

  But I read a horror story about someone who wants to downgrade an Acer Aspire XC-600 and it seems very simple not => so I expect the same thing to a XC-605. (I'm trying a bit of research before plunging).

  Here is a summary on how to get Windows on an Acer Aspire XC-600 from this post:

  1 completely turns off your computer.

  2. turn on the system. As soon as the first logo screen appears, immediately press DELETE to enter BIOS.

  3. use the right arrow key to select the authentication.

  4. with secure boot is highlighted, press ENTER, and then press the arrow down to select the people with reduced mobility.

  5. use the right arrow key to select Boot Options.

  6. with CSM launch highlighted, press enter and use the arrow down to select always.

  7. press ENTER.

  8. press on the F10 key to save the changes and reboot the system

  9 re - enter the BIOS by pressing DELETE and go to the Advanced menu.

  10 go down in the Integrated Peripherals menu.

  11 change onboard SATA Native IDE mode.

  12. press on the F10 key to save the changes and reboot the system

  By doing this, you can, since the Win7 DVD, delete all existing partitions and not all errors not being able to install on this HARD drive.

  After installing Win7 the only drivers Win7 not found were the wired LAN, card reader Realtek USB and SM Bus controller. (On the XC-600)

  My understanding is that Win 7 use Win drivers 8 without a problem. So I used the devices I've found a similar driver on the Acer Aspire XC-605 issue.

  That computer has SLIC 3.0, & Secure Boot UEFI, is why a full erase of the HDD is required; as with UEFI (Unified Extensible Firmware Interface) & Secure Boot-online Bios "wife" the hard to the motherboard. At least that's what I discovered to date. I generally supported the recovery partitions on OEM boxes like an insurance-online just in case that something goes wrong, and I can't install the desired OS. Of course wipe everything clean denies this useful backup. Comments please?

  PS - I forgot to mention that my boyfriend he filed yesterday afternoon while I was helping my mom with lights. He was still in the box.

  The box was brand new! -It never has been started! I couldn't believe he didn't even try to make 8 on this so I called him again, and he said he was certain that he would not win 8. So I did the same as above for a XC-600 and it blew.

  However if you replace onboard SATA Native IDE mode as shown above in 11, Windows will not let you install from a USB key as it crashes during the expansion of the files to 1% on the XC-605. If you use a disc of 7 win he advises you immediately after you size the partition to the OS and tell him to install there, that the drive is not configured in the Bios to be Bootable. He definition back to ACHI authorized Win 7 must be installed on the disk (I didn't try the Stick but this probably would have worked as well).

  There were a few more necessary than the XC-600 above - drivers so I installed all drivers 8 Win from the Acer site, and they all worked, but there is only one device listed in the Device Manager, under other devices-online (USB) Universal Serial Bus controller that has a yellow triangle next to him. He doesn't have a driver that are associated with and Windows Update does not find it. I find it strange that he sees it as a USB controller because as all USB ports now operate. I think that Windows has erred in the detection of this device so I am headed in that direction now.

  I tried the function of automatic detection of Acer and it says to activate a Bluetooth, Lan and Wireless LAN and try to detect again. So I enabled the wireless connection, (one is connected to Wired?) but I'll try to find something Bluetooth to turn on that, but I think it's just a Kipper.

  I hope someone will chime and advise how to determine this last device is before I get all my hair...

  Thanks for reading...

  I went to Intels here and download a new Chipset for windows 7 (chipset 10.0.13 PV installation). That will fix the problem with (USB) Universal Serial Bus controller. Triangle yellow no more... I hope it works for you 2. /Kak PC-SUPPORT Sweden

• I recently bought an Acer ATC Aspire TC-605-UB11 desktop computer; I need help setting up a 2nd monitor

  Recently, I replaced my desktop with a new Acer Aspire TC-ATC-605-UB11 model. I moved the old system to the new video card (work), but I can't find a way to allow the 2nd video card. I know that sometimes there are BIOS settings that need to be addressed, but I don't see anything that looks like what I need.

  A few details: the video material for my Acer is the Intel(r) HD Graphics 4600.

  I am away from the system at the moment and do not remember the details of the video card inserted. I get that if requested.

  I suspect that there is a framework to enable multiple monitors (I worked with before similar systems) or else the Acer does not simply another video card (maybe interruptions or other limited resources?). If this is the case, is there an option to use a USB "video card" instead?

  Thanks in advance for answers!

  What is the model # of your graphics card you are trying to install?

  What version of BIOS is installed on your computer?

  The link below shows you how to use the mode and the clone desktop mode extended (for two monitors) with your HD4600 graphics supplied with your computer.

  http://www.Intel.com/support/graphics/sb/CS-031026.htm

  Try to remove your video card and see if you can get the HD4600 to provide support for multiple monitors.  I have install 2 monitors with my TC-605.  A monitor is attached via HDMI and the other via VGA.

  To check your BIOS version on the Windows 8.1, right click on the Start button, left click on 'run '.  Type msinfo32, and then click OK

• Acer Aspire XC-605 impossible to update BIOS

  I downloaded the latest BIOS for my Acer Aspire downloads to update Acer XC-605.

  My computer came with the P11 - A2 version and the newer version is P11 - A3L.

  I created a USB boot disk using the disk USB HP and everything seems to work fine. However, when I tried to Flash the BIOS using flash.bat I get the following message:

  ERROR: File Rom ROMID is not compatible with the existing BIOS ROMID

  What I am doing wrong?

  Hello

  In this case, you can upgrade the bios but only under DOS (as you tried).

• Confusion of Acer Aspire ZC-605-ss20 façade.

  Hello! On the front of my all-in-one that shows a picture of headphones, usb 3.0 and a logo of sd card. I'm really confused about why they are there if there is nothing to these ports (except the USB 3.0, unless theres supposed to be a second.) I checked everywhere on my computer, and all the ports I have are 1 usb 3.0 port, 2 usb 2.0, Ethernet and power plug. I can't really find a fact sheet on the ports that should be online, so I hope someone experienced with help! Thank you!

  

• Acer Aspire XC-605-DT. I want to change the rat of 220v, 33 bis for an a 110v power source. What to buy?

  I would change the power supply from my computer, whose power is 220v-240v, 2A, 50 Hz for a new one that works with 110v. What power supply should I buy.

  Thank you

  Yes, it's this one. I can't find any information. As you can see, I am french and all products are normally multi votage.

  To be sure, I recommend you contact (very friendly) french support by chat or email. You have the right information about your case.

  I wish you a safe trip home.

• Aspire the XC-605 video card update

  Hi all

  I recently bought an Aspire XC-605 and I need help, so I hope you guys can help out me. It comes with an integrated only video card. I wanted to update the graphs so I bought a card Asus HD 6450 Silent PCIe. I installed the card and booted the computer and nothing appears on the screen any card (Asus or integrated) I plug the HDMI cable.

  Do not know how to proceed at this point. I went into the BIOS to see if I could disable the onboard graphics, but there is no other choice. I think that maybe it's a power issue? I don't know anything about power supplies, but certainly one that comes with the system is not standard size.

  Can someone point me in the right direction?

  Thanks for your help!

  Hi pchandra

  The video card you have is a low power card - it needs about 75 watts and draws its power from the PCIe slot, so your XC-605 feeding should be enough.

  There may be a problem with the graphics card. I suggest to try the card in another PC to rule out a problem with it. If it does not work in the second PC, the card will be replaced.

  If there is no setting in the BIOS, it adjusts automatically, usually the output, so if you insert a card, it will default to it. Similarly, if you delete it, it should default to the integrated graphics card.

  Try the card in another PC and let us know how you get on...

• Menu popup polski problemo

  Aspire XC - 605

  There was a program called Pokki, that has been uninstalled. But there are still lines written to the polski with "..." Pokki"in the context menu by clicking on the right dir/file in Explorer. How can he be gone?

  It worked indirectly - because instead of executing the .reg file downloaded — seeing it as the register-changes, he worked just by performing a search in regedit for all data "pokki" and by deleting - many of them had this line of menu polski.

• Problem acer failed flash bios tc 605

  I flashed my Acer TC 605 within Windows 10.  I think I used the version correct non-Linux.  Computer is going to restart and now, is NOT through the post OFFICE, but made just 1 long beep and then nothing.  I have seen many discsussion everywhere about the same problem with Acer computers and how to go in the bios recovery using a USB key. Unfortunately, nothing straight stitch on this the Acer Aspire TC 605 unit.  I tried to remove the CMOS battery, and moving the jumper CMOS reset.  I put the rom on a usb key file and rename it to AMIBOOT.ROM.  So far, it will not load the BIOS of the stick file.  Does anyone know a specific key that calls bios recovery?  Thanks in advance for any help!

  I give probably this one or this one a shot.  Not sure if it would work.  I couldn't pay $210 just, based on the principle.

  Another could be found here cheaper.

  http://www.notebooksolutions.ca/ZC/Acer-original-motherboard-ac82912-68868.html