confusion with cfinclude

Similar Questions

• I just got an iphone and am confused with itunes.  I the have not used in years.  I can I sync my music from itunes to iphone.

  I just got an iphone and am confused with itunes.  I the have not used in years.  I can I sync my music from itunes to iPhone.

  You need a computer that is running the latest iTunes version to either a Mac or Windows operating system.

  Mac

  1. Open iTunes.
  2. In the MenuBar at the top of your computer screen, choose iTunes > check for the updates.
  3. Follow the prompts to install the latest version.

  Windows

  1. Open iTunes.
  2. In the MenuBar at the top of the iTunes window, choose Help > check for updates. Learn what to do If you see not the menu bar.
  3. Follow the prompts to install the latest version.

  Instructions for syncing your iPhone here > synchronize your iPhone, iPad or iPod touch with iTunes on your computer via a USB - Apple Support

• Confused with methods of loading between HP and the battery Level8technology

  Hi all

  I recently ordered a 12 cell Li-ion battery for my Hp dv9310us replace battery Li - Ion 6 cells aging.

  I have been using hp refill that says that very often unload completely the battery by changing the power to "never" options settings so that the laptop stays on until there is no more energy left. Then recharge it back to 100%.

  I bought my new battery company, Level8technology and on their website under the heading battery care and maintenance, they said that for Li - ion batteries should not be left to discharge less than 20% in the opposite case the cells can fail and recharging must begin once, he gets to that or even before no problem.

  I'm confused, with my new battery only a week.

  Any experience in this?

  Thank you

  MS

  I agree with Hüffer.  I went to not allow your battery less than 20%.

  With the old nickel metal-hydride and even older NiCd batteries, it had to discharge and then recharge.

  Still, I learned that this is not necessary with Li - ion batteries.

• Extremely confused with the extremely complicated presentation of BlackBerry applications

  Please help me, I'm very confused with the extremely complicated presentation of BlackBerry applications.

  I made an app, the name is "App", I got signed and downloaded the App using the emulator Ripple, with the word 'HelloWorld' signature (password not true of course).

  Now, I do another application, with the name of the App (B) I CAN'T use the same HelloWorld signature password because the emulator Ripple said "Oh, Snap!" Build request failed with the message: [ERROR] error: Code signing request failed because this version of the application or the package has been previously signed. If please increment the version (s) and try to connect again. »

  Now, I don't understand and I am EXTREMELY confused with the presentation of the model of application for Blackberry.

  I should first request, for an another RDK and COMINCO files create a new signature for App B password?

  Or should I just increment the bundle version? the problem is when I tried it on Blackberry server seems to give narrations of error message that the APP ID is already used.

  Okay, I'm officially stuck and I don't know what to do. Can any developer of blackberry here or the official employee blackberry tells me what I need to do?

  Thank you.

  I do not use ripple either but can see what the problem is (nothing to do with the ripple)

  Open your file config.xml for the new project (probably copied 'App A'?)

  In the widget section, change the id to something different, for example com.example.AppB

  Save - reload the ripple and make sure you have the new ID in the Config-> Widget

  All sorted

• Why is my CS6 confused with CC my subscription?

  I'm so sick of oddities of recording Adobe, bugs and errors (experienced over the years) that I could vomit.

  Adobe has confused the CS6 Design Premium I have PURCHASED a few years back with the subscription of the CC that I RENT, $50 per month, when in fact the two have nothing to do with the other. Adobe must have knowledge of this error, but they have done nothing to fix it.

  More specifically, I have CC 2015 on two Macs. I also have Adobe CS6 on two Macs, including a CC 2015 on it. I just tried to launch Illustrator CS6 on the Mac that doesn't have a 2015 installed CC. It launched as a Trial Version. Huh? So I thought, OK, maybe I need to disable Illustrator CS6 on the first Mac, with CC active 2015. I have launched Illustrator CS6 and tried to turn it off. An alert told me that I would also be turning off all my CC 2015 on the Mac applications. There is the amalgam of the CS6 I have BOUGHT and the CC 2015 subscription that I RENT.

  The result is that Adobe (illegally, in my view) is preventing me to run one copy of the software (Illustrator CS6) that I purchased and registered and I'm trying to use according to the license agreement.

  I have the feeling - must have heard somewhere--that if I could move my CS6 purchase a different Adobe ID the problem would go. Anyone know if this is possible?

  Thanks for reading my rants. Yet stomach in a knot, but I don't think I'm going to puke.

  David Illig

  Yes. as CS 6 is also a part of the subscription of the CC, it is grateful for the activation of the CS 6 CC.

  In this case, you can register with a username Adobe new or different in order to activate the 6 CS. There is thus no confusion with the activation server.

  Even if the serial number is registered under an Adobe ID, you can always sign and activate using different Adobe ID.

  Let us know if you face any issues.

• Confusion with xl cartridges

  Hello

  I hope someone can clear the air with the confusion with xl cartridges,

  I just bought a HP Photosmart Premium Fax e-All-in-One Printer (C410a);

  I need to buy replacement cartridges. The specs. in 564, will the 564XL

  to adapt. They work for all colors and photo and black.

  Thank you.

  Gabe

  This camera takes 5 cartridges (564 and 564xl)

  All the 564xl will work in this printer. I noticed that black (picture not black) xl is slightly larger than normal size. All other 564XL cartridges are the same size, but have more ink in them. But they fit in the same locations.

  If you don't print often no pictures, I'd just get the black xl. I preffer print documents in project using the black cartridge only because I'm cheap and I don't replace my ink very often.

  I can't find 564XL color cartridges in a combo pack, unfortunately. So I don't know if it is cheaper to buy the combo pack regular or XL cartridges.

  But to answer your question, yes the 564xl black, cyan, magenta, yellow and black photo all work with this device.

  See you soon...

  1nFrAcTu5

• Confusion with the implementation rate Comp

  I'm a bit confused with the implications of fixing the rate of the wrong frame.  My camera can record to 23.976 however the manufacturer sometimes mentions this parameter as 24 p in the manual.  I read that there is no harm using 24 p if the model is a bit long second.  But questions arrise if the model is longer and you are being followed.  On the other hand, mocha specifies that you be specific in the choice of your pace.  The difference.024 makes a real difference?

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  CS5.5

  If 24 fps is the standard film why camera makers made their record of cameras at 23.976, or film also just named its 24 p and 23.976.  23.976, 24, 25, 29.97, 30, 59,94, 60, they are all so close

  Also, what are the consequences of ripping out at a different pace

  Thanks in advance

  You can blame the TV standard NTSC color for the odd frame rate.  At the same time, it was really 30 frames per second.  These are the days of TV in black and white ONLY.  Engineers worked mightily to get to a color system that was compatible with existing B & W games millions, and they finally got it.  But to answer a color signal, they need a little bit more information in each image. The NTSC signal was already packed and needed something to give, so they slowed down the pace a bit.

  Thus, 30 images/s became 29.97... and in direct proportion, 24 fps is 23.976.  Just learn to live with it.

  "Yes, well how can you avoir.976 of an image?

  You can not.  But a frame does NOT miss a count of the number of frames in a second. It's really a MEASURE OF TIME.  PAL-Land, a frame is 1/25 of a second.  In Hollywood, a frame is 1/24 of a second.   In days of yore NTSC, a frame was 1/30 second.  But since 1953, 1/29.97 second.

  Don't obsess over 29.97 and 23.976.  Just use them and get used to them.  Do not put 29.97 images in a model of 30 fps, or 23.976 images in a model of 24 fps just because you like whole nice.  If you do, the movement of the images you shoot can go all twisted up.  Do not.  Do not.

  End of sermon.

• confusion with the categories and types of backups

  Hello
  
  I started studying the RMAN and I'm getting a little confused with the backups... ask someone to clarify the following queries:
  
  1. HOT times and COLD backup strategies perform BACKUPSET BACKUP and COPY of the IMAGE?
  
  2 about the HOT water and COLD backup, are they only associated with the FULL backup?
  
  3. incremental backup are also HOT or COLD backup?
  
  4. incremental has 2 types: Cumilative and differentiated?
  
  
  I'm a bit confused with the above...
  
  Help, please.
  
  Concerning
  KK

  Whether HOT or COLD:
  BACKUP DATABASE will create BACKUPSETs

  (this default value can be overridden if you have set up the TYPE of DEVICE...) BACKUP TYPE to... where the backup type can be changed by default for the COPY.

  Whether HOT or COLD:
  DATABASE BACKUP AS COPY will create Copies of the Image

  An incremental backup can be a HOT or a COLD backup.

  Hemant K Collette

• So confused with the export

  Hi everyone, I used FRAPS to record the gameplay of a certain video game and he did three different clips (the other continues where the previous clip ended). I want to change this in After Effects, but first, I need to do a video together. I thought that first Pro CS5 could do the job, but I'm confused with the sequence settings. It seems like everything I try only reduced the original clips for a video surrounded by a big black space. The clips are 840 x 524. I want to join the clips and then export it to the size of origin, but first Pro CS5 changes the size of the video. Help, please.

  You must establish a pre-defined sequence which corresponds to you source footage. If there is no one to begin with, choose office and there you can set almost all the parameters of the sequence. Which will remove the black borders.

  To work with FRAPS materials, there are several threads on the CS4 and prior to the forum. A search on "FRAPS" who should appear. Lots of good reading.

  Good luck

  Hunt

• Confusion with the PF_Cmd_SEQUENCE_FLATTEN command.

  Hello

  I am very confused with the PF_Cmd_SEQUENCE_FLATTEN command. In literature, it is mentioned that it is sent when recording and duplication of a sequence. When I duplicate my custom effect FLATTEN is sent. But my confusion here is that this command is sent to the former effect which is reproduced or duplicated new effect?

  Think about what I'm doing. Please let me know where the explanation is not enough:

  I store an int value in the sequence data. And for each effect I continues to increment.

  1. I add a layer. Then I add 2 effects customized with data sequences 1 and 2 respectively.

  2. now duplicate the layer. PF_Cmd_SEQUENCE_FLATTEN command. I increment the sequence data. It is called twice for 2 custom effects. Data are 3 and 4 respectively for 2 new duplicate effects.

  But the problem is that now the effects in the first layer and the second layer, both have same sequence data. that is the 3 and 4 respectively and not 1, 2, 3 and 4.

  This can happen if the FLATTEN command is sent to the former effect prior to duplication. It's my guess that both the layer effects have updated IDs.

  Any ideas?

  Thank you

  Dheeraj.

  so...

  during the FALTTEN event records some data:

  I'm #3 on layerID 1024 in comp itemID 17 effect.

  during the commnad UNFLATTEN effect checks that it is.

  If there is effect on layerID #3 1024 17 itemID tabletop,

  He must say what the former effect.

  If data are different, it means that it is the new effect.

  It is possible that the UNFLATTEN commnad happenes before the effect has it's own effectRefH again.

  so you have to wait with this review the first call of updateParamsUI.

• A bit confused with iCloud

  Nice day! I'm just a little confused on works iCloud for my devices. For example, on my iPhone, if I let my iCloud for backup of my game 'Crossy roads. " Then after that, I open my iPad, which has a 'Road of Crossy' game on him, and backup icloud. , the status on my iPad, I played my Cross Roads made Miss and be replaced with the data I backed up to the cloud, which is the status of my iPhone?

  Welcome to the Apple community.

  The back ups of each device are unique, a backup device does not interfere with the back to the top of another device.

• Confusion with priority BIOS after running Norton Ghost.

  Years ago, I had done a fresh XP install on a 75 GB Seagate hard drive. I have an old Maxtor drive of 25 GB the first connection on the Ribbon of the IDE and the Seagate is the second link on the same Ribbon. I have updated the BIOS to boot from the Seagate.  Performance lately on the Seagate has not been good, so I decided to start from scratch. I did a fresh install of XP on the Maxtor and everything is saved for this drive. Subsequently, I deleted the partition of Seagate and used Norton Ghost 9.0 to copy the contents of the Maxtor to the Seagate. Then I changed the priority of hard drive BIOS so the computer would be of the Seagate. When the computer is first started after the copy, I got a blue screen which took place from the disk check. Subsequently, it seemed to boot from Maxtor, thanks to the constant ROAR. The Seagate is quiet.
  In addition, when I opened up under administrative tools computer management, the Seagate drive appears as drive D rather than C. I was confused so I saved a file on the desktop to confirm which drive has started. The resulting file saved in D:\Documents and Settings\... folder.  It makes no sense to me.  Why does the computer start to the Maxtor with the Seagate with the priority in the BIOS? In addition, since he did start the Maxtor, I do not understand why the file was saved on drive D instead of C (Maxtor) (Seagate). Remember, I had the same hard drive and BIOS before configuring backup and run the ghosts and files were copied on the disks expected during the priming for the Seagate.
  Does anyone have an idea what is happening?

  The BIOS follows it of own rules to choose which drive start.
  Once he locates the starting tips for, then turns the Windows.

  Windows (XP) also gets its own way to begin - so you must be sure that it's boot sequence is correct.  I got a new SATA Raptor drive which was starting slow as molasses - until I found that the system was booting from the old IDE drive before he transferred control over the fastest SATA drive that Windows has been installed on.

  Finally, other programs have different ways to determine which drive they use.
  Add a copy of a disc (using Ghost) can keep registry settings for different drive specifications.

  IMO, on a XP system, you must have 1 player who put in shape to boot from.  The rest should be just the storage drives.

• Confused with security options

  We will implement a WLC 4402 and lightweight APs on our network. Our network is the basis with windows servers and windows XP clients. The wireless network will serve as our users of local resources and clients to access a broadband service for which we put in place a different SSID and VLAN. I'm uncomfortable with the WLC and AP deployment. For guest access, I researched the option guest WLC page / authentication of the connection.

  For our local users, I'm really confused about all the security and authentication options. I know that the options are: WPA, WEP, GANYMEDE, MAC address, PKI, 802.11, layer 1, Layer 2, Layer 3, TKIP, EAP, RADIUS, but I'm really confused which to use for our local users and how to configure the right option. Our security needs are not so big that we spend not secrets from the Government, but I know that WEP is not an option for us. I would be very happy if someone can point me in the direction of understanding security options and who better to our needs.

  Thank you

  Jeff

  For security link, if all your clients supports, use WPA (WPA2 if possible) with AES encryption.

  If some customers are in charge of the ESAS, it is possible to offer also TKIP.

  For authentication of the client, as usual, it boils down to what resources (human and treatment) are available, budget and administrative pain (coupled the number of users how dynamic tends to be).

  If you have a small number of employees / hosts / devices and they tend to not be a group of high turnover, the shared key ("WPA - PSK" or "WPA-Personal") works well. It is strongly recommended to use a long enough key and complex (just enter it once during the configuration of each client).

  If your group changes, and / or a larger group, then consider using authentication 'Enterprise', such as PEAP, LEAP or EAP-FAST, which may be related to your domain server / Microsoft authentication information by was to a RADIUS server (as Microsoft IAS, which you probably already available).

  Almost, rule out completely (useless, easily defeated) MAC filtering, no to the SSID broadcast (useless, no security impact, does create problems with many MS Windows clients) and using static WEP.

  GANYMEDE + is very good for authentication, but might be overkill for your scenario. Cisco ACS and GANYMEDE + offer a lot of options, but if you do not need all the options, then it is just more difficult.

  It becomes easier when you remember that the link security and encryption (WPA, WPA2) are distinct from the user authentication (802.1 x sent through userlist, RADIUS, GANYMEDE + through EAP methods).

  Planet3 to CWNA book published by Osborne is an excellent reference and training guide and covers most (and more) about how all this fits together and common / best practices implementations.

  Good luck

  Scott

• I am confused with new mobile computer Asus

  I am confused to have 2 remove bttns you must insert underneath, and that's the one I used. Now, when I type my text inserted somewhere above.  This is a new laptop, an asus.  It has also 2 owner pgdn and no manual to me. Thank you

  As I demand, I would also like to know how to make my Yahoo home page.

  I'll take the last question first. Access

  http://www.Yahoo.com/

  by the left mouse clicking on the link above.

  Look at the top left of the page. There is text that reads,

  Do Y! your homepage. Left click of the mouse on the text.

  Sorry, I don't know what to do with 2 remove bins and two owner [Sic] perhaps pgup and pgdn is for.

  For the manual, go here

  http://www.service.ASUS.com/#! downloads/c1wax

  by the left mouse clicking on the link. Look to the bottom left of the screen for the detection function. Click on that and inspect the page a link to the manual suitable.

  Tom Ferguson

• Confusion with data sources / recordsets... ??

  I used to use Dreamweaver very strongly.  It has been a while, however, and now I'm loading up an old project that has been entirely developed "the way Dreamweaver" with games records and the use of extensions such as WebAssist gap.

  I opened Dreamweaver CC 2015.3 and I'm not finding anything on the Server Anywhere behaviors as I expected.  When I opened my pages that have the recordset data on them, or the shopping cart data, etc. I don't see all the windows of any place showing me that the data the way I used to see.

  I did a quick search in the help documentation and he said I should see a Panel under window-> links links, but I have no connections.  Don't know why... ??

  I did some digging and found a thread where it said that I had to install an extension, and it points me to a path for Windows Vista / Windows 7: C:\Program Files (x 86) \Adobe\Adobe Dreamweaver CC\Configuration\DisabledFeatures

  I'm on Windows 10, however, and I do not have a DisabledFeatures folder to the suggested location.

  I'm also confused why this would be an extension at this point... ??  Recordsets has been one of the most powerful features of Dreamweaver (I thought).  How am I supposed to my configuration database connections and to create and manage the data of the database now?

  More importantly, how do I get my old project works in the same way that he used?

  Any information on this would be greatly appreciated.  Thank you!

  Adobe dropped their Director Extension of development in 2015.

  Here are 3 freebies that you can use to install 3rd party extensions.  I used all the success.

  Anastasiy extensions Manager

  http://install.anastasiy.com/

  The seven extensions of the project manager

  http://www.Projectseven.com/extensions/

  The DMX Zone extensions Manager

  http://www.DMXzone.com/go/22670/DMXzone-extension-manager-for-Dreamweaver

  Replace deprecated server behaviors with a modern commercial extension:

  • http://www.WebAssist.com/Dreamweaver-extensions/mysqli
  • http://www.DMXzone.com/go/22096/updated-replacing-Dreamweaver-server-behaviors-with-dmxzon e-extensions /.

  To work with data Dynamics and PHP, you need a local test server.

  See setting up a PHP environment in Dreamweaver

  http://www.Adobe.com/devnet/Dreamweaver/articles/setup_php.html

  Nancy O.