The BackBerry not used 10 signing keys? With the help of PhoneGap

Similar Questions

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• Why can I not use my product key after re-boot my operating system?

  I had to do a system restore for my operating system due to virus. I had a previous version of Microsoft 2007 on the computer, but when I did the re-boot it wasn't there. I have the product key for the original program. Why can't I use it when I downloaded the program again on the site?

  Microsoft Office 2007 Download Center:
  http://www.Microsoft.com/Office/downloads/

  Requires that you have a valid Office 2007 product key.

  How to order an Office 2010 and 2007 disk backup:
  (for 2007 see the link located at the bottom of the page)
  http://www.Microsoft.com/office/backup/en-us/default.mspx

  How to replace Microsoft software or hardware,.
  order service packs and replace manuals:
  http://support.Microsoft.com/kb/326246

  = The phone activation may be required.

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

  Activate the 2007 Microsoft Office programs
  http://Office.Microsoft.com/en-us/SharePoint-Designer-help/activate-Microsoft-Office-programs-HA001233434.aspx
  (See telephone activation)

  Older version of Office: Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  = Other options =.

  Trial versions
  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

  Type errors product key invalid that occur in Microsoft Office 2007 or 2003
  http://support.Microsoft.com/kb/2549291

  Phone activation: http://office.microsoft.com/en-us/sharepoint-workspace-help/activate-microsoft-office-programs-HA010354227.aspx
  Activate by using the telephone
  You can telephone an Activation Center and activate your product with the help of a customer service representative.

  Important
  Phone numbers of activation do not appear in this article, because there are a lot of numbers, and the correct number for you depends on several factors. Microsoft software can be obtained under various licenses, including individual retail licenses, original (OEM) licenses, and volume licenses OEM. Phone numbers vary by product license and country/region. In step 2 of the Activation Wizard, use the phone number provided to contact the Microsoft Activation Center.

  Telephone activation may take longer than activation through the Internet. You should be at your computer when you call, and you should have your software product key.

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs
  http://support.Microsoft.com/kb/927921

  J W Stuart: http://www.pagestart.com

• Problem signing key with Chrome Ripple when installing on my Alpha BB10 device

  The signing keys created since Blackberry 10 native SDK Eclipse plugin can also be used to sign applications Webworks HTML 5 under construction of Goggle Chrome Ripple Extension?

  My directory "C:\Users\dev\AppData\Local\Research In Motion" seems to have the files: author.p12, barsigner.csk... etc. But when trying to install on my 'device BB10 Dev Alpha', the server of the ripple is spewing what follows:

  Build completed, now deploy
  ...

  Info: Send request: install and launch
  Info: Action: install and launch

  ...

  actual_id:
  actual_version:
  result::failure 881 missing signatures

  Problem I think was that I had no "Enable Remote Web Inspector" checked and maybe even used the wrong PIN number (confused 0 o) and 8B.

• How to use an API key with the HTTP funcitons

  I have a web service that provides a string API key.

  The function 'Set API Key"in the HTTP Client-> palette of security has two entrances, private and public key sections.

  Definition of the key given to some does not, putting my usernam as the public part does not work.

  The service (Pushbullet) gives this example in the documentation:

  curl -u : https://api.pushbullet.com/api/devices
  

  Any ideas how to make this work?

  Thanks for the message; I forgot that I posted this.

  FYI, for this particular code, they provided an API key, but then their implementation required under the user name with a password empty.

  Everyone does it a little differently, but assumed that their method is the standard.  Sigh.

• the scan can run under xp using a usb key with laser jet 2840 all in one

  I need ASSISTANCE IN MY 2840 ALL in a SINGLE WITH SWEEP. SAID NO HOOK UPWARDS. IUSING A USB KEY.

  Remove the cable first, make sure you have icons of printer in printers and faxes to this printer and make sure that you don't have another printer AiO or software, regardless of the HP, Brother, etc. If you have, you can choose one of the two. Download the full software from hp.com site and install that it will let you know when to plug the cable in and tada! Scan and everything works.

• How can I enter a genuine key to the back of my Dell laptop sticker while I get the message that my copy of Windows is not genuine and was not used this product key at installation time?

  I had instattation of some retailers and its Windows xp with service pack 2

  This has nothing to do with the Windows Update feature.

  1. Download this diagnostic tool, save it to your desktop, and then double-click the saved file: http://go.microsoft.com/fwlink/?linkid=56062

  2. after running the tool, click on the continue button, and then click the copy button (to the Clipboard).

  Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• No option to import photos using a USB key with photos

  When I insert a USB key to download the pictures I have taken I used to get an autorun come from the box to the top and give me options. It has disappeared, and no matter what I tried I can't find a way to put it back. Any help would be great. Thank you...

  I assume you've seen this, but check the settings of - http://windows.microsoft.com/en-US/windows/Change-AutoPlay-settings#1TC=windows-7

  Good reading, at least, of this section, "How to disable or enable all AutoPlay in Windows 7 and other operating systems" of this document - http://support2.microsoft.com/kb/967715 to see if that would help its. Although the document starts saying its for XP and later for Vista, it then expressly mentions W7 in this section.

  If still no joy:

  Not sure if this can help, or not - http://www.sevenforums.com/tutorials/161443-autorun-inf-files-completely-block.html (the bit to unblock). I have not tried it myself, just found by a search. Backup your important data (photos, documents, emails, etc.) first JUST to be safe.

• Dreamweaver does not use creative suite key?

  Had to reinstall dreamweaver, put in the cd key creative suite which has been used for other products and it says this isn't a valid key, downloaded the program of https://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html (because I needed only to reinstall the dreamweaver) / / what can I do to fix this is a separate installation file should I use?

  If you purchased Creative Suite, then the serial number is thereafter, not different products within IT... you must download the Creative Suite and install Dreamweaver thru that.

• Can not use my new printer with Tecra A3

  I have a Toshiba Tecra A3 that I bought in the Middle East. Recently I bought a printer "EPSON STYLUS CX 4200 SERIES. I tried to install, but an error will come out that it is impossible to install the new hardware.

  This message "CANNOT INSTALL THIS HARDWARE, EPSON STYLUS CX4800 SERIES AN ERROR OCCURRED during the INSTALLATION OF the DEVICE. THE SPECIFIC PROCEDURE IS NOT FOUND.

  I followed the installation instructions because they gave. I contacted Epson support and give some instruction in which I followed correctly but still the same message came out. And another message came out. "PRINTER SEARCH CANCELLED BECAUSE THE PRINTER PORT HAS NOT BEEN CONFIGURED CORRECTLY. PRINTING IS NOT POSSIBLE. Does it means my laptop is not compatible for this printer or could I configure my printer port?

  Hello

  Strange!
  Please tick the option in the BIOS if the parallel port is enabled.

• Can I use a product key Vista Business OEM with retail Vista Business install disc on the original OEM computer?

  In fact, I have two questions:

  [1] my niece has a HP laptop with a sticker of the OEM Vista Business product key on the bottom. She has no HP restore disks or something like that. The computer was demoted in XP and now there is something wrong and Windows fails to start (goes to blank blue screen with the mouse pointer, no further). According to the test material, the hard drive still works. I have a retail copy of Vista Business. Can I use its product key with my Vista disks professional retail to install Vista on her computer? It is the key to correct OEM, original to this computer product.

  If the #1 answer is Yes, is [2] possible to install without erasing its hard drive? Maybe by making an upgrade? She has files out there that are not backed up - mainly music and Word documents. Can I somehow save them because I install Vista?

  Monday, October 4, 2010 20:08:21 + 0000, kerasmus wrote:

  In fact, I have two questions:

  [1] my niece has a HP laptop with a sticker of the OEM Vista Business product key on the bottom. She has no HP restore disks or something like that. The computer was demoted in XP

  No, this is not possible. I guess that you don't really want
  "retired", and that XP has been installed clean.

  and now there is something wrong and that Windows will not start

  Something new, or it never does to start XP?

  (empty blue screen with the mouse pointer, not go further). According to the test material, the hard drive still works. I have a retail copy of Vista Business. Can I use its product key with my Vista disks professional retail to install Vista on her computer? It is the key to correct OEM, original to this computer product.

  No. an OEM product key does not work with a retail CD. The CD and the
  product key must match with respect to retail vs OEM, complete vs.
  Upgrade and family or professional.

  If the #1 answer is Yes, is [2] possible to install without erasing its hard drive? Maybe by making an upgrade? She has files out there that are not backed up - mainly music and Word documents. Can I somehow save them because I install Vista?

  Whatever you do, you must first copy the Word documents and music
  files from external media: CD, DVD, USB keys, eternal hard drive
  etc. Even if could do an upgrade (which you do not have a key for) you
  should do it because there is always a risk of losing everything.

  Ken Blake (MS-MVP)

• Delay in the receipt of Code signing keys

  Hello

  Of wanting to help, I asked to sign the Code keys, am yet to receive it, not more than 8 days, even after trying once again, still has not received, registered a request with customer Help Desk, I got a CASE ID, with a duration of 48 hours to wait, but still no response after 48 hours.

  Details below:

  Case ID: INC000028003554

  Date/time of your order: March 14, 2015. ORDER NUM:176368607.

  The problem has been resolved.  If you have not already received it, you should be bringing in the next 30 minutes.

• With the help of old Signature with BB10 keys

  Hello

  I used to develop applications for the former BB OS (for example OS 7). Can I use old signing keys to sign BB10 apps?

  If the answer is Yes, where can I find my .csj files?

  If the answer is no, and I need to request new keys, I still be able to use the old Signature keys to develop applications for the former BB OS?

  Thank you!

  Just to clarify, you cannot use your current for BB10 keys, if you need to request new keys.  In fact, the signing process is completely different.

  When you ask for the keys, you can ask BB10 keys, keys BBOS or both, it's your choice.

  I'm sorry, this link missed my last post.  If all goes well he will provide details too:

  https://www.BlackBerry.com/SignedKeys/Codesigning.html

• What is the best format of proxy to use when you work with S - Log in a linear colourspace?

  I worked with a few images from Sony F55 shot against a green screen. I work in a 16 bit s - rbg colourspace

  I did out of the source proxies that were photo-jpeg SBDAs, nice fast n.

  However, it is fixed the color values in the proxy with what looks like an s-curve that did eventually my overlay significantly different parameters (IE much more contrasted) when switching between the proxy and original.

  So, what would be the best way to go on the conversion of some sequences of newspapers-s to a fast proxy format without messing with settings main effects by such an amount of annoying. I can live with a small difference of course.

  Thanks in advance.

  Since you are seized, I work with the original film, not proxies and just deal with the problems of time.

  You will not get a precise key with a proxy... which is what you need.  Or you COULD work quickly and with no more worries with a proxy and get an incorrect key, but I doubt that is your goal.

• Using same signature keys across multiple accounts appworld

  I make an application for a customer who has their own account provider blackberry appworld. If I register for this client apps using my own signature key (obtained when I created my own account provider), we are having problems or have the application rejected? This will be a project WebWorks/Cordova.

  In summary: to sign keys related to accounts payable specific and therefore non-transferable?

  Thank you

  There is no problem with that, I've done it before. Only problem is that the client is unable to download a new version of this application that is not signed using your signing keys. RIM's workaround, but it's a hassle