RE HP Officejet 4500 Office D510A

I get an error message when trying to fax - FAX SEND a picture REPORT is set to OFF. How can I fix it

You will need enable the Image on the report to send faxes to get rid of the message.

To activate the Image on the report to send faxes:

  1. On the front of the printer, press the button on the key.
  2. Press the right arrow until you see print the report to the screen and press OK.
  3. Press the right arrow until you see Image on Fax Send report to the screen and press OK.
  4. Press the right arrow until you see IT on the screen and press OK.
  5. Press the back button until you see the date and time.

That should take care of the message.  Let me know what happens.

Tags: HP Printers

Similar Questions

  • OfficeJet 4500: office jet 4500 pages come out blank

    I have a hp Office Jet 4500.  Lately when I print only blank pages come out.  It is still ink in the black cartridge, so I cleaned it according to the instructions from hp (printer only in manual mode). I still get blank pages.  I guess I have to buy a new ink cartridge, because sometimes they dry out before they are empty, but now I'm not sure that's the problem.

    This may seem a stupid question, (I don't know the correct names for parties), but is the bar with light, supposed to go under the glass when she prints?  I lifted the hood to see what was wrong and I noticed it wasn't moving, even if the light was on.  I never paid attention to the printer while it was working properly.  I would like to know whether to fix it before I have to waste money on an ink cartridge.  I know that the digital display informs you if there is a power outage, but it didn't.  Otherwise, the printer goes through its motions normally.

    Hello @epona1 , welcome to the Forums of HP!

    I read your post on how your Officejet 4500 is print is no longer with the ink to print outs. I want to help you!

    The bar with light I think you describe looks like this mechanism to scan, which does not move when you make prints, so I don't see that the question. The question seems sound, as for me, would be the printhead to the printer. I say this because you have tried to change ink already and the pages are always feel empty, when normally change the cartridge would help and fix this type of problem.

    Having said that, I suggest that try you this guide and try the steps it will list. It may possibly fix the problem of blank page for you. If not and the problem does not go away, call us directly to discuss your printing with HP options.

    The problems of print quality for the HP Officejet 4500 all-in-One Printer Series

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  • My HP Officejet 4500 does not print Office documents or info online.

    My HP Officejet 4500 does not print Office documents or info online. goes through the process, but, not ink. Removed and reinstalled. Same thing. Don't know how to solve this problem

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Try printing HP and Scan Doctor for Windows
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

    Good luck, you need to update or reinstall the latest driver.

    HP OfficeJet 4500 Series - Drivers<- select="" your="" printer and="" then="" your="" windows="">
    http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%25204500&SearchType=s-002

    HP OfficeJet 4500 - support and troubleshooting<- select="" your="">
    http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%25204500&SearchType=s-001

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Solve printer problems (Vista)
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Solve printer problems (Windows 7)
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Open the printer (Windows 7) Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500

    MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500

    Hello

    1. don't you get any error message when the scanner not detected?

    2. do you insert scanner in another port of the computer or to another computer?

    3. were there any changes (hardware or software) to the computer before the show?

    4. other recognized devices?

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Run the hardware and devices Troubleshooter and see if it helps.

    a: press the logo Windows + O to open the search box.
    b: Type Troubleshooting, press on enter.
    c: now click material and its.
    d: now click hardware and devices , and then click Next 

    Answer please if you have any questions.

  • 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

    How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

    can you please email me at [removed personal information]

  • OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

    Hello

    Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

    I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

    Thank you

    Al

    Hello @adb1779,

    Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

    Step 1: Launch MSCONFIG:

    I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

    1. Click on the Start menu
    2. Click run. In the Run dialog box, type msconfig and click OK
    3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
    4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
    5. Select disable all
    6. Select apply and OK
    7. Computer restart when prompted

    When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

    Step 2: Uninstall the drivers:

    I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

    1. Click on the Start menu
    2. Click on programs
    3. Select the HP folder
    4. Select your HP Officejet
    5. Select Uninstall
    6. Please follow the instructions on the screen to complete the uninstallation.

    Once the uninstall is complete, proceed to the next step.

    Step 3: Clear the server properties:

    Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

    1. click on the Start menu

    2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

    3. in printers and faxes click on file and select Server properties

    4. in the print server properties window, select the drivers tab

    5. If your HP Officejet is listed, click on it and select Remove downstairs.

    6. a new window opens, click on Remove only the driver. Click OK.

    7. Select apply and then OK in the print server properties window.

    8. close printers and fax machines.

    Step 4: Delete the temporary files:

    1. Click on the start menu
    2. Select run. In the Run dialog box, type %temp% , and then click OK
    3. Click on the Start menu
    4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
    6. Close the Temp folder when it is empty
    7. Right-click the recycling bin on your desktop and select empty recycling bin

    Step 5: Reinstall the drivers:

    1. Please click here to download the drivers for your printer
    2. Once the site opens click on the download button at the top left
    3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
    4. Once your printer is properly reinstalled please try again to print wireless.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • Question - Error Message - OfficeJet 4500 OSX 10.9.3 - HP Office G510g scanning

    "Scanner reported an error - an error occurred during communication with the scanner.

    I have search the internet looking for a solution and tried * several * suggestions. Were unable to analyze for a few months and I'm hopeful that you have the miracle cure. Sometimes, I connect on the side Mac and sometimes I reboot and log on the side (on my Mac) PC with Windows 7. It happens with two operating systems - the OfficeJet 4500 will not scan. I use Image Capture on the Mac partition. I use the scanning utility when using my Mac as a PC with Windows 7 HP. A couple of months, I have spent many hours (literally) with a HP technician (a couple of them!) and we couldn't do anything else than give an error message. New drivers do not help. Can you suggest something else? Thank you.

    Update! Shortly after this announcement (such as minutes), I saw an announcement on how to reset the scanner bar and that was the problem! I am now and scan and grateful for the greasy68 of the display. Feels so good to have my scanner back! Life is good.

  • I need to install my hp officejet 4500 without disc

    I need to install my hp officejet 4500 without disc

    Hello everyone, welcome to the Forums

    I noticed this thread for you all in need of the drivers for your Officejet 4500 and I want to help!

    There are three models of the Officejet 4500 so I would include the driver for each other information in order to cover all the. Below I will give you links to download the drivers and software for your model of JO 4500.

    step 1: Determine which model of 4500 JO you. Click here to help you find the model number:

    How can I find my model number?

    Here are 3 different models:

    step 2: Click on your model to download and install the driver and software. You will need to choose your operating system, then click on 'Next' and then you choose 'Pilot' and download:

    1. HP Officejet 4500 all-in-One Printer - G510g drivers

    2. HP Officejet 4500 all-in-One printer - G510a drivers

    3. HP Officejet 4500 Wireless all-in-One Printer - G510n drivers

    I really hope this helps you with your driver and software installations!

    All the best,

  • OfficeJet 4500 will not print black ink

    Our small office now has an Officejet 4500 a few months without any problems. Today, it stopped printing any black ink.

    -J' changed the cartridge to be sure, but at no time has it says low ink. This fixed the problem for a few pages but the problem popped up. I align the cartridges after the installation of the new cartridge.

    -J' tried to clean the contacts on the cartridge itself.

    -The functions still scanning and color ink can be printed.

    -Overall impression seems slower, apart from the question of black ink. You know not so bound.

    -The all-in-one has been used more frequently in recent weeks.

    had the same problem, I have the hp printer 4625... I tried the self-cleaning ink printer cartridge under Tools-> cleaning ink cartridge and it worked for me...

    don't know if you tried yet, but if not - it give it a shot

    I hope you will manage to fix it!

  • OfficeJet 4500: Officejet 4500

    I installed a driver for HP Officejet 4500 on my new Mac Pro with OS X 10.10, but I can not configure the printer to print in black & white ONLY, as I did before on my old laptop. Please help me how do.  Thank you.

    Hello
    Follow the steps below to print using black ink only:

    1. from the application used to print, click the file menu and select print. The print window is displayed.
    NOTE: The print window might be minimized: click Show details to display all available parameters.

    2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    3. Select Type/quality paper in the menu dropdown.

    4. click the triangle next to color Options of spending parameters.

    5. set the color to grayscale field.

    6. set the Mode to grayscale in black cartridge only.

    You can save the settings for later use by clicking preset > save current settings as preset.

  • install the officejet 4500 g510g-m

    Im trying to install the Jet 4500 office all in one to my computer please help to install

    Here is the link you will get all the software you need to run the printer and the driver.  I hope this helps.

    Driver and HP Officejet Full Feature software

  • OfficeJet 4500 and 6380: problem with all in a single interface

    I have 2 HP laptops, as well as my work computer (a laptop HP also) and my Dell desktop computer girlfriends, air conditioned and have Windows installed 10.

    I have a HP Officejet 4500 Wireless (G510n-z) All in One installed on my 2 HP notebooks and Dell Office girlfriends. My HP work laptop has an all-in-one printer HP Photosmart C6380 (CD028A) that is installed.

    I know that the Dell itself will not be addressed here, but then it is still under warranty anyway.

    My problem is:

    Microsoft has released the update of security for Internet Explorer Flash Player for Windows 10 Version 1511 for x 64 systems (KB3132372). (My older HP laptop is 32-bit, but he got a 32-bit update for the same.)

    It seems that this update of Adobe Flash Player ruined two all in software interfaces. (Both my 4500 Officejet AND Photosmart C6380 work).

    When I try to open one of their interfaces, the initial screen flashes on the monitor but just going backwards.

    My question is: HP has a file to download to fix them both all in software interfaces?

    Thanks for any help.

    Jeff Wohnsiedler

    Hi @Jeff17866,

    The question seems to appear in the last days of 2-3 due to the specific update.

    He is currently under investigation by HP and Microsoft, these things take time, however.

    Because now I suggest you uninstall the update of KB3132372 of programs and features > uninstall a program.

    Then follow this troubleshooting to hide this update at the moment:

    https://support.Microsoft.com/en-us/KB/3073930

    Kind regards

    Shlomi

  • OfficeJet 4500 stops at halfway printing Windows 7

    Hello

    My Officejet 4500 G510g-m Wired is on a home network with 4 PCs. Two PC run SP3 of XP and have no problem printing. The other two are running Win 7 (a 32-bit and the other 64 bit). Spare no effort to print from Win 7 ends with half a printed page, an error message short on the screen of the device "Printing cancelled" and one error in the window manager queue print "Error." - sent to the printer

    The problem occurs when you print from applications (Office, PDF). The drivers are up to date. Used to be OK. Cannot identify when the problem started.

    Help, please.

    I downloaded and run utility diagnosis HP printer on both PC problem and found facilities double and triple the printer (no idea how it happened). After a complete disassembly, there included manual removal keys in the registry and a complete installation from scratch - everything works perfectly now.

  • HP OfficeJet 4500 G510n-z impossible to implement

    Hello

    I use my HP Office Jet quite successfully for 2 years with no problems at all.  But this week, there were problems with my connection Internet does not properly.  Verizon has sent a repairman, and he said that I need a new modem/router, so it installed the newest model from Verizon Internet broadband.  I had no idea how much this was going to cause me trouble.

    So far, I have used my wireless printer and realized I had to imput the new information for the wi - fi to connect properly.  Well, I have found no way to do it, unless I configured the printer since the beginning.

    I uninstalled my printer, removed from my list of devices, shut down your computer, insert the installation disc in the DVD player, hooked up the printer using the USB cable, following the instructions on, then start the computer.

    Nothing... My computer has never nothing hung

    I called HP and bought a new cable, thinking that something must be a problem with the one I had.  Nothing...

    My printer is turned on and physically connected to my computer, and it is not recognized for some reason any.  And until it is, I can't use it at all.

    Any suggestions would be greatly appreciated!

    Thank you

    Sandielynne

    OK, I have my printer doesn't work, but it has been a nightmare on the whole trip.

    I called Verizon (my ISP), and one of their tech support people showed me how to put in specific settings using the control panel directly on the front of the printer. In the original configuration, I didn't need to use it, but during the installation of the cartridges and others, so I had no prior knowledge to the configuration layout of the Wi - fi network. I do now. The printer stated that she was.

    I could not the printer to communicate with my PC.

    I downloaded the software directly from the Web site and installed, it did not find the connected printer.

    I ran the Scan program & printer doctor, he finds my HP Officejet 4500 G510n-z printer AND a printer (HP OfficeJet 4500 G510n-z) network HP320B39.

    The doctor downloaded and installed the software again, but only for the first printer HP Officejet 4500, not the printer 'network '. If the software installation was not involved, and I'm unable to use the software at all because of this.

    Every time I tried to print, it seems cannot NOT COMMUNICATE

    I used the Windows Help & Support and somehow I clicked on something good , and a window open showing each a wireless on my network device. ... .and among this list was the HPE20BE9 (HP Officejet 4500 G510n-z) I click with the right button on it and choose "INSTALL".

    Then I went in devices and printers, and saw this same exact printer listed there, with HP Officejet 4500 G510n-z, so I chose this new 'weird' printer as my default printer. Then I chose a simple print document, a new window opens for me to choose which printer to print from, I made sure the printer HPE20BE9 has been selected, checked my preferences and said to print... AND HE DID!

    I hope that I have never go through this nightmare of 6 days again. I am happy that I have persisited and has not abandoned because I was only a few seconds to screw up this printer, my patients to its full stop.  How I accidentally came across this list of "Network devices" I'll never know.   I tried since and now can not find once again, so if someone knows this information, I would be happy if I can write down it for future reference.  Without it, I still would not be able to print.

    Have a great day and I appreciate everyone who tried to help me, but my situation apparently needs more information that I found here.

    Kind regards
    Sandielynne

  • No printing Officejet 4500 on Windows 7

    Just bought my Officejet 4500 to replace a Lexmark work. I say this because to me, this seems to indicate that the USB/connection cord also works.

    Installation goes very well without any problems. Connected the USB cable when prompted by the instructions in the CD. Printer will scan and copy correctly, but not print from the Internet or a computer (MS Office) document. It will also analyze part of an example of MS Paint, which would indicate the communication is not the issue.

    Printer HP diags indicate no problems. Diags MS Printer show everything works correctly.

    I use Windows 7 Ultimate 32 bit. When asked to print, there is no error message, just no response from the device.

    Anyone has any ideas on this?

    Thank you

    Paul

    Yes, only has 8lives... Thank you.

    After a phone call from 3 hours to support with a good person, I could barely understand , it was finally established that it is my Dell computer that is at fault. For some reason when the installation is complete, the computer will only recognize the device as a FAX. There must be a problem with the software of the printer on my computer.

    The printer works perfectly when connected to my wife's Acer laptop.

    Now I need to go to another and spend several hours with someone else I can barely understand and try to solve the problem of Dell.

    I'll mark the "Solved" post for now as there seems to be nothing to do with the HP printer. But I'll post back if/when I know what is the problem and how to fix it... just in case someone else may have the same problems.

    Thanks again,

    Paul

Maybe you are looking for