Connect / as sysdba does not work

Similar Questions

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless connects, but internet does not work

  My wifi signal is strong. My computer says that it is connected. Diagnosis shows the signal is stable, but when I open a browser, it does not connect. It just seems to take forever, but nothing ever happens in Safari. Chrome has said, "there no internet connection. Your computer is offline. "and that Firefox says: 'server not found '.

  I tried the Ethernet connection, but it's the same story. Computer indicates recognition signal, but it will never truly connect. It will connect in Safe Mode, however.

  I don't know if this is related, but iTunes does not work either. I open and just get the reel spinning forever. It is said he is unresponsive, and I force quit.

  Here is some information that might be useful:

  -iPhones and MacBook in the House are fine to connect to Internet.

  -My internet company just came and installed a new router/modem. We had a few problems before (this is why they came to reinstall the hardware), so I don't know if this has something to do with him or not.

  iMac

  OS X El Capitan 10.11.6

  3.2 GHz Intel Core i5

  Deselect if selected proxy.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under "Select the Protocol", uncheck all box if marked cheque.

  Click 'OK' and then 'apply '.

• wireless connected but internet does not work

  Since yesterday my laptop has had problems connecting to the internet. It will say that it is connected to the internet but yet when I open a browser or any other program requiring internet, it does not work. However, when I use the same connection from another laptop, the internet works.

  I tried to use the option diagnose & repair and he always tells me that everything is fine. I also tried to restart my laptop and check my firewall settings, which did not help either. any help would be greatly appreciated!

  Hello

  Turn off the router or the modem (unplug the power supply) - wait 3 minutes, then the power restore - restart the computer.

  If necessary:

  Two methods - I would try 1. first and use 2. only if necessary because with 2 it can come back.

  1.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. If you usually use WiFi try a wire
  and if you usually use a wire try WiFi. Update, one being not used 1.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  ==============================================

  2.

  Do a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• I try to click on 'connect', this option does not work.

  Hello

  I tried to download a free trial version for Adobe photoshop and the option "Log" for it does not work on my desktop. What I would do in this regard?

  Thank you.

  Debopreeti Mukherjee

  Please run the vacuum cleaner to remove traces of CC and Adobe Application Manager, and then reinstall it again.

  1. remove the cloud creative app.

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Let us know if you use the cleanup tool and remove Cloud Creative & AAM.

• Classic connection Add-In does not work - db selection did not get recognized.

  Hi all

  With my client, many users work with the classic Essbase Add-In on their computers. The Add-In is distributed and installed with a software package. Out of these facilities, a machine makes problems. Excel version 2010 begins and the Addin too. Then under Add-Ins > Essbase > Connect the login window appears. The user name and password are given and OK button. See a list of Applications and databases. When a database is selected and you press the OK button, the selection changes to the database at the top of the page and the window does not disappear.

  This also happens with another user that can run on a different machine (so no access rights).

  The Add-in is turned off and on again. Problem stays.

  All other add-ins are disabled. Problem stays.

  Anyone seen elsewhere or have a suggestion?

  Thanks in advance.

  Kind regards

  Philip Hulsebosch

  Saw this problem occurs when there is a space at the end of the name of the server, for example

  "my.essbase.server" (the quotation marks to highlight where space is) caused the behavior that you describe.  We found that some microsoft products copy happily a space at the end when copy and pasted from outlook or word or etc... So we always adovate by manually typing in the name of the server

  Let me know if this helps - took us forever to understand.

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• ePrint-> connected HP migration does not work

  The printer I use is the HP Officejet 6500 has more.

  Given that my router does not support Hello and I was able to print using ePrint with my Iphone, I was a little freaked out to see that it no longer works.

  When I logged in the center successfully ePrint (I saw my printer in a Flash details) from the link in my server Web integrated, I was automatically instantly redirected to HPconnected.com

  VERY unfortunately, the redirect page http://hpconnected.com/nl/nl and http://hpconnected.com give a blank page with the other "not found" on it.

  I am not able to enter the centre of ePrint more, it keeps redirecting me to this site not wonderful.

  What should do?

  Hello

  Please click the link in the yellow circle when go to ePrint:

  

  or this direct link:

  https://www.hpconnected.com/us/en/#catalog/

  Kind regards.

• computer starts but nothing works. OneCare has been stopped, restart, no network connection found, office does not work. Analysis now with the malicious software removal tool, but nothing happens.

  OneCare was 'arrested' will not restart
  Wireless networks - does not and cannot correct
  No program will run if I'm in safe mode
  I did a virus scan with the malicious software removal tool, nothing was found.
  I write this on my netbook - I can't have my laptop online.
  I have no idea what to try next.  I need my laptop!  Help, please

  Hello laughingpaws,

  To help resolve this issue, use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• WLC Flex connect local authentication does not work

  Hi guys,.

  I'll give you a brief description of our current flexconnect configuration. We have APs configured mode flexconnect in the remote office and in local mode in the local office. Wireless LANs are the same in both locations and we have detected a problem in one specific SSID. It is a voice SSID and configured in 802.1 x mode that authenticates to a RADIUS server in the remote desktop.

  We detected only when the WAN line gets collapsed the IP phones unplugged wireless SSID and when the WAN line become free, reconnected.

  We have seen that we can configure Flexconnect local auth mode to avoid this problem, but it of esn can't work properly. We have set up APs in remote site with an IP address static and configured as NAS in the RADIUS server, but we did not see any which authenticayion in th RADIUS server package when change us the SSID to «FlexConnect auth» local

  Can you give me an idea to help solve this problem?

  Thanks in advance.

  Joel

  I suppose that clients connected by access points Flexconnect have problems where the WAN connection is down (?)

  It depends on your current configuration and security policy what are the feasible options in this scenario. If there is an available RADIUS server - who can still authenticate your users while the WAN line is down, you can configure your access points to access this server directly. You must use a FlexConnect for this group and configure the external server on the general tab, in the menu "AAA". You already made the point of access-static IP addresses and add them as clients on the RADIUS server, then it should work.

  Another option is that in the event of failure, access points to will authenticate the client based on a local data base and/or certificate. Also, this requires a FlexConnect group and the option 'Enable local authentication AP'. For example: If you are using PEAP and a specific user for VoWLAN account you can download the server and the certificates of CA to the WLC and add the credentials of this account to build the same configuration with the external server. Downside of this is the lack of central logging that may not match your security policy.

  Remember that the access point itself can't remember the relationship between the access point and FlexConnect group, in both scenarios, you need to configure all controllers manually with these MAC to the Group mappings. This behavior is different in comparison with the "groups of AP" what access point you remember during the passage of the controllers.

  The "FlexConnect local authentication" option on the SSID itself forces always use local authentication that has been configured on the FlexConnect group even if the connection with the WLC is available. I don't think that it is feasible to use it in your scenario.

  Please rate helpful messages... :-)

• _RenderingSession.getBrowserContent blackBerry Smartphones (connection, this, e); does not work on bb Simulator

  Hello world

  I develop a demo of the browser to display only the text and images. I finished my app and it works very well in blackberry devices. But I want it to work in Blackberry Simulator.

  I use Eclipse 3.4.1 and Blackberry JDE 4.6.0. Windows7 Pro

  The problem is that the line I marked in red was not executed. That the app work well until this line and it crashes on this line. I used try catch, but it is not an exception. The following lines in the same function are not executed. It behaves like the function is finished.

  When I debug the application in this eclipse platform, line by line, after this line opens a new page and it says "Source not found!"

  I need to work on the Simulator, too. It is very important to continue to improve the application.

  This is the code:

  RenderingOptions renderingOptions = _renderingSession.getRenderingOptions ();

  Disable images in html format.         String useragent = "BlackBerry" + DeviceInfo.getDeviceName()+"/"+DeviceInfo.getSoftwareVersion ();             renderingOptions.setProperty (RenderingOptions.CORE_OPTIONS_GUID, RenderingOptions.USER_AGENT, useragent);

  browserContent = _renderingSession.getBrowserContent (connection, this, e);

  Thank you and best regards.

  I have solved this issue, too. I started the MDS Simulator, and then run the BB Simulator. Then, the problem is resolved.

• Connect on Skype does not work and is not supported.

  I know that my name.

  I know my address.

  I know my password.

  I can login to this forum.

  I can't sign in to Skype.

  I don't want to change my password again.

  I'm tired of going round in circles with the 'support '.

  Is there an alternative that works well?

  $ uname - a

  Harveyp 3.2.0 - 94-generic-pae #134 - Ubuntu Linux SMP Fri Nov 6 18:45:23 UTC 2015 i686 i686 i386 GNU/Linux

  Harvey

  There is a significant delay between the definition of passwords on Hotmail and using them to access Skype. Today, I had absolutely no problem connection!

  This issue 'Closed', thank you.

• Headset Bluetooth connects but microphone does not work

  I recently bought a blue Parrott Xpressway II Bluetooth headset to use with my Windows 7 computer and a Bluetooth of Rocketfish RF-MRBTAD adapter. First installation went well, and it worked for several hours. Then it disconnected and struggled to reconnect you to the top. Once he did reconnect, the helmet would work for reading, but not for the record.

  At the present time, I have:
  • Updated Bluetooth driver to the latest version.
  • Choose the Microphone headset as default device for recording in the sound section of the control panel.
  • Choose the Microphone headset as default device for playback in the sound section of the control panel.
  • Unplugged the headphones and then reconnected it.
  • Unplug the Bluetooth adapter and reconnected.
  • Restart the computer after each of these steps.

  So far, nothing seems to work. The headset is listed as peripheral by default for recording in the sound section of the control panel. (There the green check mark next to it). However, the helmet is clearly not pick up sound. No matter how hard I speak into the microphone, not a single green bar appears next to the list for headset.

  However, the network of microphones (which is simply registered as loan, with no green tick) straightens his. I see green bars appear next to his entry, when I make the noise. That microphone works, despite not selected.
  Can anyone offer advice on what I could do to get this working microphone? In the end, I want to use with Dragon Naturally Speaking. But for now, I'd settle for just the microphone to transmit all information.

  Hi Brian,.

  What is the brand and model of the computer?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  (a) OpentheAudio recording utility by clicking the Start button, and then click Panel.

  (b) in the Search box, type Troubleshootingand then click on troubleshooting.

  (c) under hardware and sound, click Troubleshooting audio recording.

  Method 2:
  If him persists, try plugging the headphones on another computer as suggested by Sébastien M on September 12, 2013. Check to see if the problem occurs on the other computer.

  Check out the link for more information.

  Record audio with Sound Recorder
  http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.