PROTECTED R700 on docking station / command screen

Similar Questions

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Toshiba U10 Docking Station causing screen freeze

  After running my monitor external docking of th #rough the U10 my screen will freeze periodically. The only way to UN - freeze is to detach the PC and then re-dock.

  I use a 32-bit laptop to Windows 7 with 3 GB of RAM. All drivers and patches are up to date and I have to update the U10 driver to the latest version, all this without any successful resolution.

  Any help would be appreciated as it happens at least 4 times a day and is very annoying and embarrassing.

  Thank you

  Hello

  I think that it of difficult to say what could be the problem exactly.
  You are able to reproduce this issue? I mean you said that the screen freezes periodically does happen a certain application running?

  As far as I know the European Toshiba driver page provides the utility Dynadock v2.4.0.13 for Win 7 32 bit and 64 bit.
  The v 2.1.4.4 Setup CD is also available for download

  Maybe you need to reinstall this even if you said, that you use the latest version of the software
  I would also recommend test this Dynadock in relation to another PC
  Maybe the laptop preinstalled software causes this problem.

• Keep the Dock on one screen

  I want the dock to stay on a single screen however I want to keep active separate spaces I like how windows behave better display in this mode. It's very embarrassing for the docking station edit screens when the mouse is near the bottom of the screen. Or y at - there a way to change which causes the dock to move as make require more than just mouse hovering in the region.

  I tried to use the Terminal scripts before, but they do not seem to work.

  El Capitan 10.11.4

  Thank you.

  Or y at - there a way to change which causes the dock to move as make require more than just mouse hovering in the region.

  Actually, Yes, but it is not so simple. Displacement of the docking station requires that you pull down on the edge of the screen, not just fly over the area from the bottom. However, in practice, it is almost impossible not to put the mouse down there and not continue to move downwards. If you only momentarily on the bottom and then move upward, the Dock does not appear/change.

  I don't know a way to fix the Dock in a single view.

• HP 2008 120W Docking Station (KP080UT) Support screen double

  The Station of host HP 2008 120 w (KP080UT) supports two screens?  If this is not the case, what docking station will be?

  I tried to run two monitors connected to the docking station with a portable computer stock HP Compaq 6715 b.  A monitor is on DVI, the other is on VGA.  Single screen works individually on both DVI and VGA, but together, it won't.  The laptop sees there is a second monitor, but when I said "Extend my Windows desktop on this monitor." the first monitor flickers as its going to change everything, but goes back to the single screen.  I updated the graphics drivers and tried with both open and closed laptop.

  Support Online Chat told me that it depends on the graphics card.  6715 b is not compatible double screen.

• External monitor like main screen for M200 with docking station

  Hi all

  I have a Tablet M200 with GeForce FX go 5200. I have a Toshiba docking station and an external LCD display. When it is docked, I would use the external LCD as main display and the LCD builtin as the secondary display. (I want the taskbar, icons and newly opened windows on the external screen when it is docked.)

  Unfortunately, I can't find the right combination of settings of this. If I put Windows to extend the desktop on the external screen, "use it as primary display" option is grayed out. I don't get the span horizontally or vertically options in the nView utility, just the Standard and the Clone (and this only if I do not extend to the office.)

  How can I get the external screen be the main while being the internal school?

  Thanks in advance!
  Kind regards

  Levente

  Hello
  What home-unit station use?

  Tablet Multi dock PA3315E-1PRP or Port Replicator advanced III: PA3314E?

  thx for the info,

  Good bye

• Tecra 720cdt: screen is central docking station - 1/2 in.

  Hello

  Ive just took a Tecra 720cdt with docking station, when the 720 is on display of the battery is ok, when the screen docking station is central 1/2 in. I downloaded drivers but how and what driver do I need to use to reset the docking station for produce size full screen?

  Thank you.

  Windy morning

  As far as I know if you use the right display driver should not be a problem. As far as I know, this unit comes with Win 95 and you can find the right driver on the Toshiba download page. What operating system is running on your device?

  Check also displays the properties on the settings tab.

  Good bye

• T520: Unable to support more than 2 screens? (via the docking station)

  All,

  I have a problem, allowing more of 2 monitors. My T520 is connected to a docking station that has two outputs digital video that are connected to two monitors NEC.

  For some reason any when I go on Windows | Display settings | It does not allow me to activate all three display at the same time. Can I have one) two monitors on the computer screen or b) + 1 monitor.

  Whenever I tried to connect to the 3 screen, it automatically shuts the screen 2.

  Other colleagues with T420 not experience this problem. The T520 & T420 uses the same docking station so I don't think that is the question.

  My first thought is to update the video driver that I did but still does not. The T420 has a nVidia card while T520 has an Intel processor on board one.

  If anyone has any suggestions that would be great.

  Thank you

  T520 with Nvidia Optimus can support up to 4 screens, while as the T520 with intel only the graphics card can support only 2 screens.

  If you need more screen support on the T520 of yours, you may consider usb2dvi, eGPU, Vidock.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• T500 loses screen when ejected from the docking station

  At my office, I use a docking station with external monitor (DVI join). If I ejected from the docking station, my laptop screen darkens. The only way I can do it works to turn it off, eject and restart. It works fine then.

  I have the ATI graphics card, and I don't think that the switchable graphics works. Is it possible to use the integrated graphics card Intel when the battery power? This seems to be ideal.

  Any advice will be appreciated.

  Unfortunately windows don't remember installing icons when you switch your resolution. When you change the resolution would pass and spoil your icon arrangement.

• Docking station Office attached screen HDMI "disappears".

  I have a coming Pro (7130) that I use as a desktop computer. I have a Samsung P2770 HDMI attached bottle and rather than display running in monitor mode system "extend" with the Samsung as a primary monitor. My power settings are as follows: Plugged In (which is the normal state in this scenario):-turn off the display: 1 hour-computer put to sleep: never - put into hibernation after: never - leave wake timers: disable USB - selective suspension: enabled on a fairly regular basis, I'll come, move the mouse and the Samsung will not be recognized... the screen only I have is the display of the venue. I have to switch on the docking station for the external display to be recognized again. The keyboard and mouse (MS new Comfort Desktop) seems to work fine through the USB port docking station in this video failure scenario. I never had this problem on my Win8 Office which replaced the venue. Any ideas or suggestions? AustinTechie

  Brian,

  Did what you suggested and all seems to work well.  Not having graphic problems.

  Thank you.

• Can I use 2 monitors + laptop screen? Latitude E5530 (HD 4000) with E-Port over Docking Station

  Hi Dell Community.

  I for work recently bought a Dell Latitude E5530 with Intel HD Graphics 4000 and an E-Port Plus docking station. Running Windows 7. Currently I have 2 dell monitors that are used with it, but I want to know if it is possible to use my laptop as well screen (3 screens)

  When I try to do it the way regular thanks to display settings it wont let me choose only 2 of the 3.

  I'm wasting my time trying to figure this, or is there a way to do?

  Thanks in advance for any comments

  Ryan

  Unless you install an external video solution non - Intel GPU can lead only two screens at a time.

• Protect S100: Advanced Port Replicator/Docking Station

  I need to know what docking station to use it please.
  Advanced Port Replicator III Docking Station
  This one will work?

  Hello Andrew

  I found some nice info on the unit that is compatible with your S100 Portege.
  Visit this link:

  http://www.CostCentral.com/prodDetail/Toshiba_Advanced_Port_Replicator_III/PA3314U1PRP/C90140/

  Hope so, I could help

  Good bye

• Latitude D630 screen resolution changes after no mooring and docking station re

  I have a user with a Latitude D630 running Vista business with an external monitor.  Resolution 1680/1050 the value.

  Stop, UN-dock, take the computer laptop home.

  Lift the rear of the laptop, d-dock, power.

  Now, the resolution is 800/600.

  This notebook is a replacement of his first D630, which had the mobo and other HW replaced until I'm the new laptop as a replacement.

  Tested with several monitors and docking stations.

  Anyone else seeing this?

  
  

• Portege R700 and dockstation, built-in screen starts black

  My laptop is a R700 with a docking station. Windows 7 x 64.

  If I start laptop anchored, can be seen on the external monitor and the built-in lcd screen.
  If I'm undocked stars, starts windows and lcd goes black. It is out for external monitor if I connect one expiration correct lcd.

  Swtiching function keys doesn´t works, as if undertand lcd is correct (but there is only a black lcd screen).
  Updated to the latest version of the video and to change versions (aug2012) we get the same result: black lcd.

  If uninstall video driver and set the driver standard vga works well, but there is no switching function key to use the external monitor.

  Did anyone here with same problem?

  If the video signal has been set to external monitor using Fn + F5, you will need to use this combination of keys again to return to the internal display.