Connect hot and cold sealing

Similar Questions

• Is make Journal required for backup of database hot and cold water?

  Hi Experts,

  Please explain--again it takes to backup of database hot and cold water?

  Thank you

  Did you backup managed user or RMAN backup. In RMAN backup, you only need logs archived. But in the cold backup managed user, you don't need the redolog also if the PB was properly arrested. Jut copy the DBF and controlfile and put it there to the target server and during the recovery of redolog files will be created automatically.

  Please note that the database must be correctly stopped before cold backup is taken.

• Conditional action using hot and cold state to open/close toc

  I am trying to create a button that will open/close the table of contents and when you click top toggles the State of the icon/button hot/cold.  Essentially using a transparent icon of smart as a button.  When the button is clicked will open the table of contents and the icon will change to the State (hiding the cold status icon), then when you click above the table of contents again will be closed and the icons to switch back.  I have my action is defined as shown in the images below.  Any ideas would be greatly appreciated.

  Have you read this: buttons in the form of rocking - Captivate 6 - Captivate blog

  Scenario 4 is what you want: have two buttons to the form and use an advanced standard action for each of them.

• Hot and cold backup

  Hello, in my system (oracle 9), we take, we take backups hot quite frequently.
  We also take cold weekly backups.
  Today, our system requires more running time, and so there was a discussion if we stop taking cold or no backups.
  
  Can someone please advise, whether cold backups are necessary in this case? do us injecy any additional risk risk of loss of data if we stop cold backup?
  
  
  If not, when and under what circumstances cold backups are necessary?

  Many databases never get a cold backup due to time requirements.

  As long as you continue to take hot backups and keep your logs archive saved should be no reason why you should continue taking cold backups.

  There are databases that I supported who have never had a cold backup.

• Lightroom 3 - simulate highlight feature of hot and cold of Aperture areas

  I recently made the transition from Aperture 2 to Lightroom 3. More a question of preferring the workflow in LR. But there was a device in the opening that I had learned to count on. This is the function to "warm light & cold areas. Has anyone found simpler, a way to get the same results in LR 3?

  Thank you!

  LR has several ways to treat with him, among them the two recovery and fill light sliders. But not a simple slider to adjust the two ends of the histogram.

  Gossweiler beat

  Switzerland

• HP pavilion dv4 (1287cl) computer laptop laptop gets hot and does not load then

  Hi guys, my hp pavilion dv4 1287cl gets hot and the fan emits noises.
  WHN it has fully charged so I remove the plug charger and it's cold as hell. This only happens when it's warmer and the fan makes noise that is made all day.i use for programming and playing games like minecraft. also it is not sometimes load when it is warmer more when the fan is the production of abnormal voice.

  I'm started to get upset with that I had broken the screen and keyboard (but had then replace them) because it makes him angry.

  I live in pakistan so u kn on load shedding and the electriccity turns off like after like every 8 hours and it freezes.

  Please help me guys.and thanks for reading this story together soft

  Hello

  Click on the link below:

  The fan runs constantly, the PC is running more slowly than expected and generates heat

  Note:

  We suggest that you should try to update the Bios.

  The update of the Bios?

  Download the latest update of the Bios for your model specific here.

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything on the laptop.

  Note:

  The Bios update process is always risky. You do this at your own risk.

• Satellite S203 becomes hot and unplug

  My Toshiba Satellite s203 becomes hot and disconnect. The use of fan to begin with. Copper hose gets very hot. It cuts after 1-3 minutes second time after 15 seconds. What can be the reason?

  The battery has no power, but the PC is connected to the wall. Please help me.

  Leif

  > What can be the reason?
  Your laptop is probably full of dust and it cannot be cooled correctly. These symptoms are typical for dirty notebook.
  So, buddy, it's time for the cleaning of the laptop. ;)

• Toshiba Libretto W100 is hot and fan still works

  Hello

  my new Toshiba libretto W100 is still very hot and the fan is still running.
  Even with programs that use few resources.
  If I use programs like Trackmania or Fifa 11, the temperature rises again, and the fan works very quickly and loudly.

  Is this normal? reduce the temperature and noise?
  Thank you. Best regards.

  Hello

  I think you use high hard who insist a lot on the CPU.
  This causes higher heat dissipation and therefore the temperature drops to a higher level and this is why cooling modules run faster.

  So in my opinion, everything is ok here; It s nothing unusual in the world of computing. the warm air must be removed, and so the fans run at a higher speed.

  I think that the fans don't run faster if you use low performance applications. Right?

• My macbook air running hot and the battery drains quickly can help you with this problem?

  My macbook air running hot and the battery drains fast is a 13 ", at the beginning of 2014.  Processor 1.4 GHz intel core 15Can you help with this problem?

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• My 2013 series MacBook Air hot and slow or freezes when I'm on Facebook or Tumblr. In addition, the battery begins to drain. Why?

  Whenever I'm on Facebook or Tumblr, my MacBook freezes and runs hot and slow, eventually freezing. He also began to overheat, with maximum speed cooling fan and battery drainage. This only happens when I'm on these two sites since it rolls when they are not open. There is no problem in loading the computer or using other programs and Web sites.

  These issues have started only very recently, in the last week or so. What is strange is that for a number of programs or open tabs does not seem to cause problems, but once I open Facebook or Tumblr, the computer becomes overloaded (even if there are no other programs running outside of Safari and they are only two tabs open). Even YouTube does not cause the same effect.

  Help is very appreciated!

  MacBook Air (13 inch, mid 2013), OS X El Capitan (10.11.3)

  Hey there!

  What browser do you use? I had some problems of my own with Tumblr, Google Chrome, and power draining eventually led me to dump Chrome when I realized it was hogging all my resources. I recommend also to configure tumblr to show you your dashboard in the pages of 10 to 15 positions rather than scroll without end - in this way, he does try to keep everything loaded at the same time.

  You can also see your Mac activity monitor while you use these sites to get a better idea of how the power of the computer's processor and RAM are handling activity.

• 2012 the MacBook Air running hot and slow

  After about 20 minutes using my 2012 MacBook Air gets very hot and the cooling fan starts to operate at full speed. At the same time, it slows down considerably. Is this a sign that the battery must be replaced (anyone know the approximate cost to do this?)? However, I have no problem to recharge the battery and it seems to work for a reasonable period between charges.

  Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• WiFi loses connection intermittently and the erasure of the arp arranges

  This has been asked before many times, but none of the above worked for me so far.

  I have a MacBook Pro with El Capitan on it. From time to time, usually 5 to 10 minutes,

  my connection drops and I can browse the internet. As:

  4 bytes of 8.8.8.8: icmp_seq = 7646 ttl = 53 time = 13,091 ms

  64 bytes of 8.8.8.8: icmp_seq = 7647 ttl = 53 time = 17,035 ms

  64 bytes of 8.8.8.8: icmp_seq = 7648 ttl = 53 time = ms 13,716

  Request timeout for icmp_seq 7649

  Request timeout for icmp_seq 7650

  Request timeout for icmp_seq 7651

  Request timeout for icmp_seq 7652

  Request timeout for icmp_seq 7653

  Request timeout for icmp_seq 7654

  Shooting, then turn on the WiFi will fix the problem, but I tried to limit the problem

  and I discovered that deleting IP of the route in the arp table will also fix connectivity

  immediately:

  $ sudo arp d 192.168.0.1

  Request timeout for icmp_seq 7718

  Request timeout for icmp_seq 7719

  Request timeout for icmp_seq 7720

  64 bytes of 8.8.8.8: icmp_seq = 7721 ttl = 53 time = 10,947 ms

  64 bytes of 8.8.8.8: icmp_seq = 7722 ttl = time 53 = 11,966 ms

  64 bytes of 8.8.8.8: icmp_seq = 7723 ttl = 53 time = 12,576 ms

  64 bytes of 8.8.8.8: icmp_seq = 7724 ttl = time 53 = 11,058 ms

  64 bytes of 8.8.8.8: icmp_seq = 7725 ttl = 53 time = 15,173 ms

  Deactivation of unicast arp has NO had no effect either:

  $ sudo sysctl-w net.link.ether.inet.arp_unicast_lim = 0

  Notes:

  -J' have two MacBook Pro at home. Other works without problem.

  -My phone and other devices work also with the same router with no problems.

  -The problematic MacBook works with other WiFi networks without any problem.

  What could be the problem?

  Yes, clear arp fix it. Very familiar with it.

  I had this problem for 2 years and more than 2 or 3 MacBooks, on El Capitan, Yosemite, and Mavericks.   I Googled it every 1-2 years months.  I captured packets and tested several access points... The best fix so far... is the arp compensation, and I have the automated at the moment:

  in a terminal:

  While true; make sudo arp - da; sleep 2; fact

  When the window is open, every 2 seconds, my arp table gets undervalued... and if I lose connectivity, the maximum cut is 1 to 2 seconds.

  I noticed that in some places, I don't have the problem... its as if my laptop reacts badly to some other customers on the same WIFI network.  This question makes me crazy, and I can't imagine how was such years.  If I don't fix it manually, I find myself for 30-120 seconds every few minutes.

• Satellite Pro A300D down hot and stops shortly after. Help!

  Hello together,

  3 weeks ago, I bought the Satellite Pro A300D laptop. Since the beginning, I have the problem that the laptop gets hot and stops less than an hour!

  I'm not running any application of high performance and I keep the left side of the free laptop so that the hot air can get away! I already cleaned the heatpipe using a vacuum cleaner.
  It could not be! I need the laptop for work and that it is impossible...
  What can I do? Should I send him?
  Help, I'm grateful

  Frank

  Post edited by: DerVogel

  There could still be dust stuck in the radiator, but you say that its only 3 weeks to dust is unlikely.

  Its under warranty, so take it to a Service Center for repair. This may have the thermal grease refreshed or something.

• iCloud mail makes MacBook Air running very hot and very fast battery drain

  Given that the upgrade to El Capitan and running the latest updates of my MacBook Air has worked very (almost too hot to the touch in some places) hot and the fan that has happened all the time. The battery is also in very quickly - I can sit and look at the percentage count.

  If I disable my iCloud in Mail preferences the computer messaging service cools, the fan stops and the battery stabilizes. So it must be a problem with iCloud mail. Anyone who has ideas or fixes for this?

  Have you installed something called "Avast?