Unable to share files or printers between windows vista desktop and computer laptop windows 7

Similar Questions

• Files & folder sharing between XP, Vista, Seven with password protected

  How to share files or folder between XP, Vista & seven... must password protected
  My vista and my friend seven sharing very well, is password protected and I would like to add another XP at the center network and sharing as well, but I find the xp you have a problem, it can make sharing with vista & seven only without password protected and I would like to know how can I do with password protected sharing.
  Below are done on xp:
  1. install the update kb922120
  2.secpol.msc-> authentication security LAN network manager set to send LM & NTLMv2 - use NTLMv2 session security if negotiated.
  Using Xp to Vista to access, seven a shared folder, no problem, while the password protected is located next
  Using XP to Vista, the folder shared seven, the access you have problem while the password is defined on
  It show no permission, but suppose that displays the prompt for credentials...

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• Unable to share files from Illustrator to draw on my ipad to my Illustrator on my desk

  Hi, I am unable to share files from Illustrator to draw on my ipad to my Illustrator on my desk... I'm only given the opportunity to share with Behance, there is no option to share with Illustrator or Photoshop. I called the helpline, and suggested I delete the app and reload, they weren't able to confirm if I would lose my sketches in the process. Any thoughts?

  Hi Anne,.

  Do not uninstall the application. You're just trying to send from the wrong place. Open a Web and tap the icon (square with an arrow) sharing in that open Web to send to Illustrator or Photoshop CC.

  Two quick mentions:

  Make sure that you are connected to the mobile application and the desktop application with the same Adobe ID.

  Make sure that your desktop applications are the latest versions.

  Let me know how things are going.

  Sue.

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• I had a Mac desktop and two laptops to Windows. If I subscribe to Lightroom CC will I be able to open it on all three devices?

  I had a Mac desktop and two laptops to Windows. If I subscribe to Lightroom CC will I be able to open it on all three devices?

  You can install it on 3 computers, can be signed two at a time and can actually use on one at a time.

  If you want to use on the third, just disconnect one of the other and connect on a third.

  Please see:

  FAQ: Can I install Creative Cloud on several computers?

  FAQ: How can I register on and off creative cloud?

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• I am unable to share files on my Windows Vista computer with my Windows XP computer.

  Hello, I hope someone can help.
  I have a laptop vista and xp from a desktop computer.
  I can see the two computers on both computers.
  I can fully share and copy the files from my xp.
  I can also file destruction c t the vista, but only the xp to vista
  and the Vista for xp.
  It is the last issue that I didn't understand.
  Help

  original title: file for xp vista

  Hello

  You receive an error message?

  You can follow the steps in the article and see if it helps.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows#section_4

  See also:

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

• Networking issues: cannot share files or printers.

  I use a PC and a laptop. I connected them via an ethernet network cable. The problem is that I can't share my printer on the network. I have internet on the PC and laptop. I can see the computer 'host' through the laptop and I can see the "guest" through desktop PC. My printer is hooked up and I can use it on the computer 'host', but not 'invited '. In fact, the only thing that I can share is the internet connection. No files, printers, or anything else. The printer is configured to share on the 'hosting', but when I get on the cell phone "invited" it is unable to find it. I know that the functions of cable because if I disconnect it from the laptop I'm more able to see the other computer and I will return to local access. My network in my system tray icon says ' currently logged in: 3 access to the local network and internet. »

  We are able to ping computers, our working groups are correct, and we turned on all the files already sharing settings.

  Both systems are running windows Vista. Any suggestions on how to fix this?

  How your post is related to the Windows Update feature?

  Try this forum instead: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The script files are corrupted in vista on my computer laptop r61i

  Technical support of McAfee said that my scripts files are corrupted in vista on my computer r61i laptop... How can I download and replace on a preinstalled OS

  * original title - scripts to repair files in thinkpad r61i of vista preinstalled v

  Hello DonSchaffer,

  1 script are. what files you referring?

  2. What are the problems you are having with the computer?

  3. are you referring to the file damaged desktop system?

  Please give us more information about the files that you are talking about and the issues you have with the computer. If the system files are corrupted on the computer, I suggest that you run the tool on the computer system file checker. You can check the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• A hard time with the drivers for Vista Home Premium computer laptop computer network with Windows 7

  OK, I've read tons of information on that and I'm stumped.  I have an Epson Stylus CX6600 all-in-one printer.  I have my Windows vista Home premium networking with my 64-bit Windows 7 computer.  I go to the step where the machine Vista attempts to connect to the printer on the network, then it asks a driver.  The driver file is already on the vista machine.  I installed the latest drivers from Microsoft and epson on the Windows 7 machine and he always asks a driver.  Can someone point me to the exact file name and the location of the driver in the vista vista machine so I can simply copy and point to it my windows machine 7.  I did the updates from Microsoft to get all the latest drivers.  Thank you.

  You do not install the Vista drivers on Windows 7 computer.

  Repost nicely in the Forums of Networling, as it is a matter of networking:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Vista Networking forum at the link above.

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads?filter=answered

  Windows 7 networking forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Are there ways recommended to inflexible syncronizations, updates, licenses between a tower offline &amp; Online computer laptop?

  Greetings,

  I have a Windows 7 64-bit workstation that is currently getting an internet connection. I plugged it long enough to allow activation and connection to the programs already installed.

  However, I am when it comes to updates or is it the account activation and favourite routes.

  I paid my account for a year, and approval of the Tower has been synchronized. It should not be the next right issues?

  My computer laptop and mobile are my primary use multi-platform CC devices right now. They regularly connect to the internet.

  An Internet connection is required the first time you install and your applications of office of license, but you can use applications offline with a valid license. Desktop applications will try to validate your software licenses every 30 days. For annual members, you can use the applications up to 99 days in offline mode. Months of members may use the software for 30 days in offline mode.

  Please see this link for the synchronization of your files:https://helpx.adobe.com/creative-cloud/help/sync-files.html

• Y at - it a shortcut that will instantly put a file in a folder on my desktop iMac computer?

  Y at - it a shortcut to one or more files in a folder on my desktop instead of drag all the way through the large iMac screen? I like the real estate of this iMac 27 inch Retina 5 k (end of 2015) with OS X El Capitan 10.11.4 - but my hand gets tired by dragging the mouse to the mouse pad and the edge of the table! Please give beginner tips. Thank you.

  N °

• How can get the keys to windows vista for my computer laptop elitebook 8530w c

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  ===================================================
  For OEM support software... Check with your computer manufacturer.