connect target launch
Concern: VBAI2009, 2010 + target (EVS RT, smart cam)
Hello
I use NEITHER target with VBAI 2010 on a vision system. When I run the vision system, VBAI opens on the home page (see picture) but I would like this VBAI to connect directly to the smart camera (and open control interface). Is this possible?
Thanks for your help.
The only way to do so is to launch VBAI with command line arguments. (You might have a shortcut that has the configuration of arguments from the command line for you).
Here's what it would look like to launch in configuration mode:
C:\Program Files (x 86) \National Instruments\Vision VBAI 2010\Vision \config \target 169.256.0.2 Builder.exe
You can use \pwd if you need to specify a password to access the target with the password string after this tag.
You can use \inspect instead of \config for access control mode instead.
You can also use \nowelcomeonexit to not see the Welcome dialog box when closing of Vision Builder AI.
You will be asked inspection to load when you go two-mode.
Hope this helps,
Brad
Tags: NI Hardware
Similar Questions
-
CSV to Oracle - (integration) fails on ORACLE connection target
Hello
I'm trying to load data from a csv file into Oracle db by ODI.
Here are the steps I followed:
1 created the physical schema FILE
1 created the physical schema and an Oracle data server in the physical Architecture
2 - creation and related to logical schemas
3 created the corresponding data models and the shops
wheat to display the contents of CSV data and target in ODI table.
4 - creating the interface, add csv as source and oracle table as the target
5 used "LKM File to SQL" and "IKM SQL append" (FLOW_CONTROL is false)
When I run the interface, the session starts while I'm getting the wrror following in operator:
ODI-1228: ARIBA_G1 (integration) task fails on ORACLE DEV_DW connection target.
Caused by: java.sql.SQLException: SQL92 no token taken in charge at position: 116
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1319)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:1190)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:341)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:649)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1079)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3752)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3937)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1535)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the section of Code:
BeanShell script error: source file: online assessment: "if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... ": Typed variable declaration: error in calling the method: getDataSetMin() method not found in class 'com.sunopsis.dwg.snpreference.SnpReferenceInterne': line: 25: in file: online assessment:" if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert int... (": odiRef .getDataSetMin)
Info OSB: insert new lines to the line: column 0: columnNo
If (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {out.print ("\ninsert into\t");
out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
out. Print ("\n (\n\tclick");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\n") \nselect\t");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\nfrom\t");
out. Print (odiRef.GetTable ("L", "INT_NAME", "A"));
out. Print ("\n");
} else {out.print ("\ninsert into\t");
out. Print (odiRef.GetTable ("L", "TARG_NAME", "A"));
out. Print ("\n (\n\tclick");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n\tclick");
out. Print (odiRef.getColList ("," "[column]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\n") \n\nselect\n ");
out. Print (odiRef.getColList ("", "[column] ',' \\n\\t ', ' ', '((INS and!")) (("(TRG) and REW) '));
out. Print ("\n");
out. Print (odiRef.getColList (","[EXPRESSION]", ', \\n\\t ', ' ', ' ((INS and TRG) and REW) '));
out. Print ("\nFROM (\t\n");
for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {out.print ("\n");
out. Print (odiRef.getDataSet (i, "Operator"));
out. Print ("\nselect \t");
out. Print (odiRef.getPop ("DISTINCT_ROWS"));
out. Print ("\n\tclick");
out. Print (odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \\n\\t ', ' ', '((INS and!)) (("(TRG) and REW) '));
out. Print ("\nfrom\t");
out. Print (odiRef.getFrom (i));
out. Print ("\nwhere\t");
If (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {out.print ("\n\tJRN_FLAG <>has ' \t");}
} else {out.print("\t(1=1)\t");}
} out.print ("\n");
out. Print (odiRef.getJoin (i));
out. Print ("\n");
out. Print (odiRef.GetFilter (i));
out. Print ("\n");
out. Print (odiRef.getJrnFilter (i));
out. Print ("\n");
out. Print (odiRef.getGrpBy (i));
out. Print ("\n");
out. Print (odiRef.getHaving (i));
out. Print ("\n");
} out.print ("\n)"); "
out. Print (odiRef.GetInfo ("DEST_TAB_ALIAS_WORD"));
out. Print ("ODI_GET_FROM\n\n");
} out.print ("\n");ORIGINAL TEXT *.
< % if (odiRef.getUserExit("FLOW_CONTROL").equals("1")) {% >}
Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
(
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
)
Select < % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
< % = odiRef.getTable ("L", "INT_NAME", "A") % >
< %} else {% >}
Insert into < % = odiRef.getTable ("L", "TARG_NAME", "A") % >
(
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList ("," "[column]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW) ") % >
)Select
< % = odiRef.getColList ("", "[column] ',' \n\tclick ', ' ', '((INS and!") ("(TRG) and REW)") % >
< % = odiRef.getColList (","[EXPRESSION]", ', \n\tclick ', ' ', ' ((INS and TRG) and REW)") % >
DE)
< % for (int i = odiRef.getDataSetMin (); i < = odiRef.getDataSetMax (); i ++) {% >}
< %=odiRef.getDataSet (i, "Operator") % >
Select < % = odiRef.getPop ("DISTINCT_ROWS") % >
< %=odiRef.getColList (i,"", "[EXPRESSION] [column]", ', \n\tclick ', ' ', '((INS and!) ("(TRG) and REW)") % >
< % = odiRef.getFrom (i) % >
where < % if (odiRef.getDataSet (i, "HAS_JRN").equals("1")) {% >}
JRN_FLAG <>would be "< other %} {% > (1 = 1) < %} % >}"
< % = odiRef.getJoin (i) % >
< % = odiRef.getFilter (i) % >
< % = odiRef.getJrnFilter (i) % >
< % = odiRef.getGrpBy (i) % >
< % = odiRef.getHaving (i) % >
< %} % >
) < % = OdiRef.getInfo ("DEST_TAB_ALIAS_WORD") % > ODI_GET_FROM< %} % >
Any suggestions are appreciated.
Mike
Hi Sara,.
No, no error or bad files.
In fact, the data is moved correctly into the temporary table created by ODI, but not the final target table.
I discovered the reason if the knowledge modules imported were of another ODI installation!
I made sure to import the good KM and it worked.
Thank you!
-
Hi all
I have a question about connect with database.
[oracle@srv-deeps-01 ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Fri Aug 23 09:11:26 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> select * from v$pwfile_users; USERNAME SYSDB SYSOP SYSAS ------------------------------ ----- ----- ----- SYS TRUE TRUE FALSE MON TRUE FALSE FALSE [oracle@srv-deeps-01 ~]$sqlplus /nolog SQL*Plus: Release 11.2.0.3.0 Production on Fri Aug 23 09:00:35 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. SQL> connect mon/mon@deeps as sysdba Connected.
Also, I can connect to the database with rman
[oracle@srv-deeps-01 ~]$ rman target / Recovery Manager: Release 11.2.0.3.0 - Production on Fri Aug 23 09:12:45 2013 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: deeps (DBID=3218868617) RMAN> [oracle@srv-deeps-01 ~]$ rman Recovery Manager: Release 11.2.0.3.0 - Production on Fri Aug 23 09:14:30 2013 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. RMAN> connect target mon/mon connected to target database: deeps (DBID=3218868617) RMAN>
But when I try to connect to databases remotely I ORA-01031
[oracle@srv-deeps-01 ~]$ rman Recovery Manager: Release 11.2.0.3.0 - Production on Fri Aug 23 09:16:20 2013 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. RMAN> connect target mon/MonDEEPDB2013@deepdb RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== ORA-01031: insufficient privileges RMAN>
In what could be the problem?
PS This is a RAC database
What is the value for the parameter remote_login_passwordfile?
Aman...
-
RMAN > Connect target
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
ORA-04063: package body 'SPS. DBMS_BACKUP_RESTORE"contains errors
ORA-06508: PL/SQL: called program unit is not found: 'SPS. DBMS_BACKUP_RESTORE ".
RMAN-04015: error in establishing the nature of database target the WE8MSWIN1252 value905377 wrote:
RMAN > Connect targetRMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
ORA-04063: package body 'SPS. DBMS_BACKUP_RESTORE"contains errors
ORA-06508: PL/SQL: called program unit is not found: 'SPS. DBMS_BACKUP_RESTORE ".
RMAN-04015: error in establishing the nature of database target the WE8MSWIN1252 valueHello
Same mistake once again,
>
C:\Documents and Settings\Administrateur > rmanRecovery Manager: release 11.1.0.6.0 - Production on Tue Jan 3 15:57:53 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN > Connect target system/spsadmin@SPS
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
ORA-04063: package body 'SPS. DBMS_BACKUP_RESTORE"contains errors
ORA-06508: PL/SQL: called program unit is not found: 'SPS. DBMS_BACKUP_RESTORE ".
RMAN-04015: error in establishing the nature of database target the WE8MSWIN1252 valueRMAN > exit
>Some how I have in my notebook, how have solved the last time. Check below work around
SQL> Select owner,trigger_name,triggering_event,status from dba_triggers where triggering_event like '%LOGON%' ; OWNER TRIGGER_NAME ------------------------------ ------------------------------ TRIGGERING_EVENT -------------------------------------------------------------------------------- STATUS -------- SYS DB_LOGON LOGON ENABLED SQL> alter trigger sys.db_logon disable; Trigger altered. Then check for invalid objects, and recompile them @?/rdbms/admin/utlrp.sql next C:\Documents and Settings\Administrator>rman target / Recovery Manager: Release 11.1.0.6.0 - Production on Tue Jan 3 16:18:40 2012 Copyright (c) 1982, 2007, Oracle. All rights reserved. connected to target database: SPS (DBID=1754608551) RMAN> list backup of database; using target database control file instead of recovery catalog List of Backup Sets =================== C:\Documents and Settings\Administrator>
Re: why a loop the chain of synonyms occur
Published by: CKPT on April 16, 2012 11:27
-
Unable to connect target database using dbclient
Hi all
I installed database 11.2.0.2 successfully on linux machine.other machine is windows machine, I installed in CUSTOMER DB 11.2.0.2 by using db client unable to connect target database.
Database version: 11.2.0.2(64 bit)
Windows database: 11.2.0.2(32bit)
Thank you
GSI installed database 11.2.0.2 successfully on linux machine.other machine is windows machine, I installed in CUSTOMER DB 11.2.0.2 by using db client unable to connect target database.
Set up Listener on the server?
Can you tnsping from windows to linux machine?
-
Run vi without connected targets
I added two targets in my project. A cRIO and an Ethernet expansion chassis.
When they are turned on and connected to the network, I can run my vi in 'My Computer'.
How can I feed my vi if they are not activated?
I need to remove the project when I don't have access to them?
Any code that references a VI on the missing target will cause your VI of does not work. Its kinda like having a single target system and you try to run a VI after have 'removed' (deletion) one of the screws under it is.
However, you certainly code peut launch a project that does not reference the lack of targeting. For example, my real-time project includes several analysis routines that run on the host computer (including generate them Configuration file). These will work fine, as well in development Mode and in compiled Mode, with my remote system is disabled (or otherwise not connected).
Bob Schor
-
Unable to connect target RT in the LabView project
Hello
I use time LabView real-time 8.5 on a desktop PC. I see the target at MAX where I can change the network settings on the target and use FTP without problem. But it is impossible to connect to the target in a LabView project.
The error of the target journal wrote:
####
#Date: Monday, June 9, 2008 03:04:29
#OSName: PharLap
#OSVers: 13.0
#AppName: PH_EXEC
#Version: 8.5
#AppKind: AppLib
#AppModDate: 09/06/2008 06:55 GMTLVRT. DLL loads the address: 0x003EE000
Can someone help me?
Thanks in advance
Hello everyone.
The problem is solved! The reason of my problem is that LabView RT 8.5.0 supports no more than 2 GB of RAM installed on the computer, as described in this document.
My RAM GB setting the things that were not possible before:
-to connect to the target in a LabView project and deploy the code.
-to activate the multiple core processor in the BIOS of the machineI said that the withdrawal of the USB keyboard is useful. Indeed with my keyboard plugged in, when I install other software as server VISA for example, MAX do not recognize the target automatically, I have to add it manually by specifying the IP address and I can not connect to the target in a project of LV.
Unplug the USB keyboard (and other devices) to solve this problem.Good day...
-
A UDP connection target FPGA with LabVIEW
Hello
I have an FPGA with Ethernet connected to my HOST PC, now I would like to connect the LabVIEW FPGA target and access to its records. Please suggest me.
Kind regards
Chetan
Hi Cheetah,.
don't know, because I do not know your format or the manual of your FPGA...
-
Connect target 'Generic Data Source' to a MySQL instance
I'm trying to connect to our TEO (2.2) instance to an instance of MySQL, but unable to do so successfully.
The server of TEO, I loaded the MySQL provider and the ODBC driver.
I then try to define the details of the connection to the target:
Host name:
Default user:
Connection string: Provider = MySQLProv; Data Source =
By clicking on 'OK' throws the following error: "'MySQLProv' provider is not registered on the local computer."
Based on the error, it's for me as TEO server does not recognize this provider, but I would like to help on it got to a point where it does.
Could you please provide me with the steps needed to get our TEO instance to connect to the DB?
Thank you
MarkSolution:
(1) install the Cherry City Software provider: http://cherrycitysoftware.com/CCS/Providers/ProvMySQL.aspx
(2) configure the following connection string: Source Provider = OleMySql.MySqlSource.1; Data =
; Initial Catalog = Thanks a lot C Roberts!
The connection string contains "MySQLProv", that you actually used what?
Looking at the example of c# code (and VB.net) I see this as the provider:
OleMySql.MySqlSource.1
Have you tried that?
It also looks like to
Data source =.
Initial Catalog =
If you arrive there, would probably be best to prosecute TAC for review.
-
Unable to connect target - vSphere replication Sites
I hope someone here can help me understand a problem connecting between my two servers of VRM.
Background:
After passage of 6.0U2 5.5, I had problems with re-login Site Recovery Manager. Because SRM was not really in use yet (testing), I decided to redeploy fresh from the base, including replication of vSphere components.
After removing all the rehearsals and not record old vSphere replication devices, I transferred the latest packages of EGGS to the VRM. Everything was fine. I have updated certificates for certificates customized our company certification and placed the root certificate in the file /opt/vmware/hms/security/hms-truststore.jks . Then, I recorded each VRM with their respective vCenters and had no problems.
Both VRM active lounge and OK in vSphere replication of the Web Client:
When you attempt to connect to the target Site, the following error is received:
But then in the list of tasks, it ends with success and shows the connection, but with a connection problem error:
This is the architecture of our PSC and vCenters and each VRM. All use of our certification of Enterprise SSL certificates:
There is no firewall between one of these servers.
HMS logs are attached here as well.
Any help would be appreciated.
Thank you
After that I originally posted this, a new version of vSphere replication was released. After the upgrade to the latest version, my problem magically disappeared.
-
Connection failed "launch system" distance DRAC5
the details of the server are:
Server: windows Server 2003, Enterprise edition (pe) 1950
RAC: DRAC 5, material A00, 1.33 firmware (did not see newer versions on the dell site)
-I can connect and send the DRAC GUI (remote and on the server)
-First, I selected the console tab, I was prompted to install an activex plug-in virtual kvm
-J' have installed, disconnected from the DRAC, reconnected with success, but when you try to connect to the console via "console redirection" the session Viewer returns an informational message 'connection impossible, impossible to connect to the device, due to network problem '.
-It doesn't seem to matter what version of IE, the client is using (I tried IE7 and IE6)
I saw an older post with a similar problem, but suggested that the problem was solved by upgrading the firmware of the DRAC to 1.32 (it would be a version of what I have in place)
any suggestions are appreciated, thank you
-
Duplication of backup-based with a connection target
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db dual to 2013/06/21 11:03:04
RMAN-06136: the auxiliary database ORACLE error: ORA-01503: CREATE CONTROLFILE failed
ORA-01990: error opening the password file ' / u01/app/db9i/OraHome9i/dbs/orapw.
ORA-27037: unable to get file status
Linux-x86_64 error: 2: no such file or directory
My name of the instance is administrative in auxiliary and administrative in the target (source). Should I create a password on auxiliary file?
Ok
The problem is that I need to scp that my archive log files too to retrieve restore procedure, once in place, everything is completed successfully.
-
While performing a mapping (present in the package) that loads the file to table data, my mapping is being failed in the step - LKM file with above mentioned SQL error.
This task is running for 30 candy Mint and loading data about 30 to 40 million for the temporary table of C$ ODI.
Before the completion of the task is to make failure and also C$ table is also get deleted.
Any possible resolution for above mentioned the issue?
Problems have been solved.
In our case, the prefix of all the data store name has been SRC_ so the nickname of all the data store became SRC, and the table name C$ depends on the daatastore Alias.
So for executing two mapping tables $ CAN have been getting dropped by other mapping due to the same table name $ CAN.
Change the Alias name giving it a unique name solve the problem.
-
I get a * warning: Firewall has blocked a program to access the Internet "... then he RECOMMENDS: click on"prevent the attack"buttom to prevent any attacks." Then there \google\chrome\application\chrome.exe c:/programfiles(x86). Whenever I try to go in Windows Defender, he kick me out. Now thre is a pop up saying "attention!" Attempted theft detected identity. Hidden connection target IP64.51.8.67: keys of Microsoft Corporation. Then has my IP # and wants me to click 'prevent the attack' box which directs me to where I can buy protection. Help, please!
Hello
· What anti-virus program do you use?
. What operating system do you use?
· When exactly do you get the firewall warning message?
· In the face of this problem when you use Internet Explorer or Google chrome?
If you see any suspicious pop ups, unwanted toolbars, redirects, strange resultsor other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.
Method 1:
To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:
http://www.Microsoft.com/security/spyware/browserhijacking.aspx
Method 2:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
-
AnyConnect Secure Mobility - disable the auto launch at the connection
Hello
I recently put the hands on the last client of v3.1.01 Secure VPN mobility. We are upgrading the former client anyconnect 2.4 there are many changes that is catch us by surprise.
The biggest problem I have right now, it's the new mobility VPN starts automatically when a user logs into a machine. We would like to disable this connection automatic/launch. With the former client 2.4 we simply disabled the AnyConnect Service in Services.msc default and it starts when a user is ready to connect.
Any suggestions on how to do it?
John,
I'm sorry, I missed actually version "3.1".
To disable the "AutoConnectOnStart" Please add the previous piece of code to the XML profile:
fake
The XML profile is located in the following path:
The directory path of the BONE
Windows 7 and Vista
C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile\
Windows XP
C:\Document and Settings\All Users\Application Data\Cisco\Cisco AnyConnect secure mobility Client\Profile
Mac OS X and Linux
/ opt/cisco/anyconnect/profile /.
I enclose you an example of the XML profile.
Additional information:
Auto Connect on start now disabled by default
HTH.
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
Maybe you are looking for
-
Document pages block for another user has the file open
Hello I'm using Pages 5.6.2 In our society, we begin using pages for the edition of our records. We use a shared network of synology to quickly access our files. It's a DS-209 + II. Now, we had several issues where a user still had a file open and op
-
Notebook PC 11 flow: OS lost need download?
My child messed up how to do a download for the operating system?
-
I bought a new HP printer in 2 July 15 because HP stop support of my HP printer I had at that time here. I want to exchange and unopened 74XL black cartridge for a black 62XL cartridge that would work on my new printer HP Officejet 8040. How can I do
-
Open Source components for 8 7840 place?
When Dell will display the components open source for the update of the latest OS (5.0.2) for the 8 7840 venue? The update of the OS was available in early may, and now it has been almost two months without posting the kernel source and developer too
-
MCAFEE VS. NORTON 360 TO PROTECT THE VISTA OPERATING SYSTEM
I have a Qosimio Toshiba computer and it came with trend Anitvirus software for the first year. I have the Vista operating system. I want to either update Mcafee or Norton 360. What is the best for my computer and do I uninstall the antivirus softwar