connect to 9791 WSN gateway on different domain

Similar Questions

• remote connection to 9791 WSN gateway

  RE: gateway WSN-9791

  I want to collect data from a WSN without going through a computer at the location of very distant field.  For 1 beat per minute, we don't need the power and the cost of a RIO, or even a laptop computer in the remote location.

  I want to use a gateway 9791 (with some WSN-3202 devices) in a place of far field, directly connected to the internet via a satellite link.  I want to run a LabVIEW program on a computer at the location of the head office.  I intend to collect remote data locally on a LabVIEW VI without a computer in the remote location.

  Since the 9791 won't be on my same network back to the home office domain, how MAX to find the 9791?

  I've only used the 9791 on a local network, where MAX auto-detection is, well, automatic.

  William Reed

  Thank you very much - that really help.

• A computer on Win7 Home premium able to map a network drive on a computer in a different domain?

  A computer on Win7 Home premium able to map a network drive on a computer in a different domain? Or is this a limitation of the home premium? In addition, the computer I have tries to map running Win7 ultimate.

  If I am not mistaken (I reserve that right!), Home Premium cannot be joined to a domain and the OP also indicates to gain access to resources in a different domain. Thus, according to trusts in place or VPN connections, it could be a challenge. Where did the idea of using something easy of access/sharing of resources.

  Otherwise, you need to set the resources to allow access of the anon/no authenticated user.

• How to set up multiple LIVE IDS prod certificates on Sharepoint 2010 single server runs several Sharepoint Sites with different domain on port 443?

  Hello

  I integrated LIVE ID with Sharepoint 2010 and got the same compliance.

  In sharepoint server 2010, several sharepoint sites are run under port 443 with different domain names.

  I configured 1 LIVE ID certificate for one of our sharepoint sites would like to know can I use the same certificate for other sites too or I need to install other certificates LIVE ID to access other sites.

  How can I get prod LIVE ID certificates are available for free as nexus offers two certificates INT and PROD (x 509 certificate) or do I need to buy.

  If I need to buy where can I buy it go?

  Hi ppdremsadm,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to the configuration of Live ID in Sharepoint 2010. It should be better in the Forums of Windows Sharepoint.

  Please ask your question in products and technology SharePoint forums to improve assistance in this regard.

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• Different domain user

  I am a student. At school, the tech people have implemented windows school accounts. The school version of Windows is Windows 7 Profesional and my Home PC is Windows Vista Home Premium. I'm at home and I want to add my school account which is on a different domain from my PC at home. Is it possible to add an existing account from another domain on my Windows Vista PC?

  No you can't do this unless your school makes it possible (believe me, they do not).

• I can't connect to my default gateway

  I'm trying to port before my router because I can host a server on a game. For the port forward, I need to connect to my default gateway to change the things I need to change.

  Resettlement will almost certainly cause the loss of your data files and applications that you added. First, consider the following steps.

  1) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  (2) how to run a startup repair in Windows 7:
  http://www.SevenForums.com/tutorials/681-startup-repair.html
  "Startup Repair is a Windows 7 system recovery tool that can fix certain problems, such as missing or damaged system files
  (ex: boot MBR file), that might prevent Windows from starting correctly.

  How to start on the System Recovery Options in Windows 7:
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html
  "The System Recovery Options menu is on the Windows 7 installation disc. If your computer (OEM) manufacturer has preinstalled the recovery options, the menu can also be installed on your hard drive as a recovery partition. »

  How to create a Windows 7 system repair disc:
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
  "That you will show how to create a Windows 7 system repair disc to use at startup in the system recovery options if you do not have a disk Windows installation, cannot find your Windows installation disc, or cannot access to the recovery options provided by your computer manufacturer."

  Windows 7 - repair facility:
  http://www.SevenForums.com/tutorials/3413-repair-install.html
  "This will show how to do a repair of trouble Windows 7 installation and to preserve your user accounts, data, programs and drivers of the system."

  Windows 7 - download the repair disc
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

• KICKED OFF & REVIEW DOWNLOAD error "Unable to connect to the default gateway"

  Why am constantly kicked offline with message saying unable to connect to the default gateway? Must constantly to troubleshoot every 30 minutes and restart the router, and also more recent update more critical MSFT will not download? k

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wifi-keep-disconnect-troubleshoot-default-gateway/369ae5a0-2C25-46EE-B64F-437907d5ade6

  http://Windows.Microsoft.com/en-AU/Windows/configuring-multiple-network-gateways#1TC=Windows-7

  Two threads above can help with the router.

• VPN could not establish a connection to the security gateway

  My VPN connection worked, but now after several hours I can not connect.

  My LAN works. (Windows Server 2003)

  The app:

  Cisco Systems VPN Client

  The error message:

  Opening TCP to 209.189.224.138, port 10000...

  Communicating with the gateway to 209.189.224.138...

  Cannot establish a connection to the security gateway.

  What could be the problem?

  Thank you

  Greg

  Hi greg,.

  on the properties of tunnel-> transport mode, click ipsec over UDP and try to connect... I think that, from now on, you connect via TCP 10000.

  Concerning

  REDA

• How ACS to communicate with DomainController in different domain controllers?

  Dear Sir

  Our company has 4 ACS, version 5.3, a primary school and three others are secondary.

  They are in the other domain controller, and I do not know which domain controller they communicate, how to check and how to configure ACS5.3 to communicate dedicated DomainController?

  Thank you

  Michael

  Michael,

  Can you try this and see how it goes:

  You can run the following command in the CLI of the ACS to the ACS
  configuration mode-

  ACS / admin # acs - config

  Escape character is CNTL/D.
  User name:
  Password:

  ACS/acsadmin(config-acs) # dns.dc ad-agent-configuration. .com distribution

  You may see a problem with the format of the command. I have not personally tested lately on ACS 5.3.

  Note # using this will force the ACS to authenticate using only this specific DC. If the domain controller
  becomes inaccessible, you must run this command to point the ACS to a different domain controller.

  In addition, this would require a reboot for the services.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Open the TAC case if you are not comfortable running the above command.

  -Jousset

• What happens if I am connected to the internet through two different sources or more?

  What happens if I am connected to the internet through two different sources or more?

  You get Internet from two sources. What did you expect to happen?

  This is not double the speed of anything...

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Configuration of MRA with different domain name

  Hello

  We are ARM configuration with internal and external domain name different. internal domain is abc.local and external domain abc.com

  C exp, CUCM and IMP are in the area of the abc.local and Exp E found in domain abc.com. users using the [email protected] / * / to connect to jabber.

  So we created external SRV records. (_collab - edge._tsl.abc.com). in internal DNS server, we created _cisco - uds._tcp.abc.local.

  I know, we create _cisco - uds._tcp.abc.com in internal DNS record as well.

  The problem is because we cannot add abc.com area (it will affect the existing ERP Setup) we cannot create the _cisco - uds._tcp.abc.com in our DNS server.

  There is no work around for this?

  Aneesh Abraham

  Take a look in the area to locate in the document below:

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/Windows/9_7/CJ...

• I need to connect to two pieces of identification different apple on my new macbook

  When I was first put in place the macbook a few minutes ago, he asked for my ID... i of apple in the one I use to i tunes but when I try to logout of in inside iCloud for you connect with the id correct apple for iCloud, it does not give me the option to log out without establishing a new special password for the macbook.  How can I register a different apple on icloud only ID?

  You may need to use a local account for the newspaper of the Mac and then use iCloud account

  OS X El Capitan: Configure users on your Mac - Apple

• Target subnet mask and the gateway in different subnets and clock error

  Hi all:

  Need help. I have a standalone PC operating a direct VI on a CFP with a crossover ethernet cable (developed on my laptop, compiled and installed as a standalone on the PC). When the VI runs on standalone PC version, everything works (click the button, analyzers are read), but the time being pulled from the CFP is wrong, and infact resets to December 1969, a default value. I am error checking, and no error is marked with the CFP, slaughter programmes. When I go to the MAX function, the time playing of the CFP is the funky time. Looking at the IP addresses, I generally use a very standard protocol (192.168.000.001 for the PC, 192.168.000.002 for the CFP currently running on the subnet for the pc and the PSC 255.255.255.000). However, when I apply this Protocol on the CFP through max, it gives the error "the subnet mask you entered puts the target and the entry door to different subnets." I am not versed enough well understand this, and what I read in 2 postings here, I tried to harmonize the IP numbers and the subnet, and they do not seem to help. When I put intentionally in false numbers IP or subnet default time synchronization time correct (pc), but functions block (as expected). It is certainly not an issue of PC zone.

  Anyone can offer any guidance?

  Currently runnig LV 8.2 with drivers of 2009. PSC 1804 with MAX 4.6.

  I appreciate all help.

  Best regards;

  GIS.

  OK, I solved it. FYI: for those who are not aware of the IP: IP of the host and default gateway server to the same value. My work for the host computer are 192.168.000.001 and subnet masks can stay 255.255.255.000. The CFP has been set to 198.162.000.002 with a 90.00.00.03 DNS. Time server has been blocked by the Norton 2009 Firewall (even with an exception) and thus the cruxt of this issue together. I had to uninstall completely from this "software". I hope this helps.