connect to a signal of a QObject returned from C++

Hi all

In C++,.

Class A: public QObject

{

Q_SIGNALS:

void result (B * ret);

}

Class B: public QObject

{

Q_SIGNALS:

void result (C * ret);

}

Class C: public QObject

on the side of QML

attachedObject:]

A {}

onResult: {}

RET. Request (); Question: How to connect to the signal B'?

}

}

]

found a solution:

using Qt Quick connection

Tags: BlackBerry Developers

Similar Questions

  • My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?

    My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?  I tried turning it off and back on after awhile, but did not.

    Double check with a magnifying glass and a good lighting that nothing has been slain. Then, try insertion and withdrawal of your headphones a couple of times. If this does not work, it may be while the shooting went wrong. In this case, make an appointment at the Genius Bar at your local Apple store for the assessment.

  • c:\windows\system32\osk.exe, a referral was returned from the server

    My scren keyboard on does not: error when I try to use:c:\windows\system32\osk.exe, a referral was returned from the server

    Hi Kevin Urubek,

    1. what operating system do you use?
    2 is connected to the domain of the computer?

    Method 1
    If the steps above fail, I suggest to create a new user account and see if you get the same error message, the following link will allow to create new user account.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If everything works well in the new user account, then I suggest you to follow the article to transfer files and settings to the new user account.
    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Method 2
    If you're windows7, try the steps from the following link:
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.

    Hello

    I just bought an HP computer, Windows 8 Pro, x64bit. I worked OK for a week and then started to freeze. It freezes all the time. I'll send the error message in the event log. I'd appreciate your help because I've had enough of this gel and I turn it works all the time.

    Log name: System
    Source: Schannel
    Date: 12/07/2013-12:55:12
    Event ID: 36870
    Task category: no
    Level: error
    Keywords:
    User: SYSTEM
    Computer: Aleksey
    Description:
    A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030D. The internal error state is 10001.
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        36870
        0
        2
        0
        0
        0 x 8000000000000000
       
        7179
       
       
        System
        Aleksey
       
     
     
        Server
        0x8009030d
        10001
     

    Thank you

    Hi Aleksey,

    I appreciate the efforts that you put to publish the query on this forum.

    Please help me with the following information about this issue:

    (1) is the computer that is connected to a domain network?

    (2) when exactly you receive the error message? It is by accessing any application?

    If the computer is connected to a domain network, I suggest you send the request on 8 Windows IT Pro. Check out the link:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    Please let us know if the computer is not in a domain. We will be happy to help you come.

  • ERROR: Unknown error returned from Agent of VMware Converter

    I have a XP box with a few applications I want to do in a virtual machine.  I have ESXI free running with several local and virtual machines and the data of the network store.   I installed the converter version 4 and could not convert the PC, so I uninstalled and installed version 3 with the same results.  I have attached customer newspapers and converrter of the last run.  If I look at the process on the area of conversion and customer ESXI, I can briefly see the vm name pop up in the list, and then he disappeared when the error in the conversion box

    This is the output of the conversion

    15:16:33 step 1: connection to VMware Converter Agent on localhost

    15:16:33 step 2: creation of target virtual machine and the conversion of the data

    15:16:35 configuring the settings for the virtual machine target...

    15:16:37 WARNING: decline of additional parallel ports

    15:16:37 WARNING: fall of extra serial ports

    15:16:37 WARNING: down the audio device

    15:16:37 creation of virtual machine target...

    15:16:43 ERROR: unknown error returned from Agent of VMware Converter

    VMware Converter Agent logs are located on the local host to C:\WINDOWS\Temp\vmware-temp\vmware-converter*

    VMware Converter Client connects to this computer can be exported, or found in "C:\Documents and Settings\superuser\Local Settings\Temp\vmware-temp\vmware-client."

    VMware Converter logs is stored on a temporary basis and should be retrieved as soon as possible.

    Any ideas?

    PDK

    PDKNY,

    Welcome to the VMware Community Forums!

    > Root user authentication

    > Connected!

    > Using a specific location DataStore3 to disk: 0

    > Using the data store DataStore3 for VMX

    > Waiting for creation of the VM finish...

    > Waiting for a task to finish...

    > job [error] CreateVm failed: cannot access the file.

    You seem to be getting a failure when creating the virtual machine.  Converter 3 and 4 work the same way, that they submit the request for vCenter/ESX to create the virtual machine, as required.  I have seen where an initial conversion has failed once before or another conversion was at the same time, and we had to restart the running converter (Server source and converter) before the lock system was released on the data store.

    Kind regards

    EvilOne

    VMware vExpert 2009

    NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

  • When I return from the page of google search for a link then button does not return return

    When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

    the problem was resolved after remooving extenshion «user agent overrider»

  • I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    General suggestions for Wi - Fi problems, maybe one of them will help you... especially #4.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (5) disable the prioritization of device on the router if this feature is available.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) to restore the device (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

  • Satellite A30: System busy after returning from standby

    My abrupt A30 Satellite developed a problem when returning from standby mode. The system busy "Hourglass" is constantly and will not die. I have reploaded the power management utility since all options in 'Properties of power Option' are grayed out except for the "Power Meter" tab. It did make a difference.

    This problem appears at the beginning?
    Maybe the operating system has been installed there several times and now the registry entries are corrupted.
    This is why the system busy hourglass may appear.

    I m not 100% sure that this will help, but maybe you need to reinstall the whole OS
    On the new OS installed should all work a lot faster

  • When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

    When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

    Hello
     
     
     
    1. how you try to install Service Pack 2?
    2. are you able to boot to the desktop?
     
     
    Method:
    Step 1: If you are able to start the computer in normal mode, then try a clean boot.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, start the computer in normal mode.

     
    Step 2: Try to install Service Pack 2 manually.
     
    How to obtain the latest Windows Vista service pack

     
     
    If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
     
     
     
    If you are unable to install Service pack 2, you can consult this article.
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358
    Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.
     
     
     
     
     
     
     

  • Not able to install updates to get the message: 'updates were not able to configure correctly, returning from changes'...

    Original title: I have Vista with Service Pack 2, but were unable to come down and configure updates since 07/12/11. Need help, thank you.

    Do not get the error codes. Just when I reboot, I get the message "updates were not able to configure correctly, returning from the changes".

    Hello

     
    You are able to start in safe mode, then you can perform the clean boot in safe mode and then try to boot into normal mode.
    Put your boot system helps determine if third-party applications or startup items are causing the problem.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    If you are able to boot to the desktop after you perform a clean boot Windows check updates history of inforamtion on the updates failed.
    Reference:
     
     
     
     

  • Get updates windows default error configuration. returning from changes in Vista

    Hello

    I get this message "failed to Setup updates windows. returning from changes. do not turn off computer ' on my computer laptop compaq presario with windows vista.
    I have a problem it works and stop. Sometimes it is just on this slide. they gave me some recovery disks too. Help, please

    Thank you

    SK

    Hi henry ate,

    1. did you last changes made on your computer before the show?

    Follow the following troubleshooting methods:

    Method: 1

    Configure the computer to clean boot and check how it works.

    To configure the computer clean boot, follow the steps in the below link:

    How to perform a clean boot

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Method: 2

    Perform the troubleshooting steps form the following links.

    The problems with the installation of Vista updates

    You cannot install some programs or updates

    Method: 3

    Follow the form of measures, the following link to install windows updates in Windows Vista.

    Install the Windows Vista updates

  • Windows Vista: updates are not configured correctly, returning from changes

    my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

    So far there are problems or there are many who have this problem?

    Have you tried to disable temporarily running anti-virus software?

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058/#appliesTo

    Troubleshooting in Win 7 vs KB971058 for Vista
    http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

    The system update tool

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

  • How to return from Vista to XP Pro?

    How to return from Vista to XP Pro?

    If this is the case, contact the manufacturer of your computer:

    Can I downgrade my OEM version of Windows Vista business to Windows XP Professional?

    Yes. Right of demotion OEM desktop operating systems PC apply to Windows Vista business and Windows Vista Edition full, as stated in the terms of the license. Please note, downgrade versions OEM Windows Vista business and Windows Vista Ultimate are limited to Windows XP Professional (including Windows XP Edition Tablet PC and Windows XP x 64 edition). End users can use the following media for their downgrade: Volume Licensing media (provided that the end-user has a Volume License Agreement), trade retail (FPP) or System Builder hologram CD (provided that the software is acquired in accordance with the Microsoft OEM System Builder License). Use of degraded operating system is governed by the Windows Vista Business license terms, and the end user cannot use the downgrade and professional Windows Vista operating system. There is no right of demotion for Windows Vista Home Basic or Windows Vista Edition Home Premium.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Otherwise:

    Come on first, site of the manufacturer of your computer, check to see if your model computer has XP drivers available for it...

    If the XP drivers are not available for your model, forget the idea.

    If Yes, download and save to a CD or Flash drive.

    Then buy a disc XP and license.

    Save all your data because it will be lost during the installation of XP.

    Then follow the steps below to do a clean install.

    http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

    Once installed, reload ALL your other programs of original media, or download again.

    Reload all drivers and utilities for your motherboard.

    See you soon.

    Mick Murphy - Microsoft partner

  • Default configuration of the windows features, returning from changes

    Failure configuring windows features, returning from changes

    What is the cause?

    Sorry, can't say. You must post a lot more detail.

  • BlackBerryContact returned from remote sensing

    Hello

    I hope someone can help me; is there a way to determine from the BlackBerryContact returned from remote research that the BlackBerryContact came from a distance search rather than a local search? A field in the contact?

    Thank you

    David

    No, there is no field that indicates if the contact came from a remote research or is stored locally on the BlackBerry smartphone.

Maybe you are looking for