Connect to CC - stuck on "Installing update..."

Similar Questions

• Stuck on installing update 1 of 14

  I'm trying to stop my netbook, and it was stuck on installing update 1 of 14 for well over an hour.

  Hi Scouty7,

  1. perform the updates always installation?
  2 you cannot stop the laptop?
  3. do you get an error at startup of the system?

  Given the many updates installed on the computer, it is recommended to wait for the updates are installed successfully. Force reboot or stopping manually in the middle of the installation of updates can cause system start to fail.

  If you encounter problems starting system, then follow method 1 or method 2 of this article:http://support.microsoft.com/kb/949358

  We recommend that you send us the current state of the computer, so that we can help you further.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stuck at installing updates 1 of 26

  I'm stuck on the screen that says "do not turn off or unplug the machine, install update 1 of 26" it has been like that for 4 hours.

  Chode_Muncher,
  That suggested Andre, that's when you go into Windows Update, you can choose to display updates are available.  In the list, you can then select the updates to install.  You must then select only 2 or 3 then restarts once they have installed.  Repeat this process until all updates are installed. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help my pc does not connect to the internet after installing updates

  My internet does not work after you install the updates so I uninstall and they work fine.

  It happens all the time as I paid for the program and downloaded on my PC and they need to access the internet at work and when I click on it it say failed to connect or unable to connect to what happens with that?

  I downloaded mozilla fire fox and that no longer works and the same for IE8 after instalation my internet does not work why?

  I need serious help to what I at least need these programs, I bought to work.

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  OR

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to my Skype after installing updates.

  Original title: access Skype.

  I can't connect to my Skype from this morning. It worked yesterday, Windows tells me he's going to try and solve the problem and let me know. How long it will take and how will that they informed me that it is fixed. Skype stopped after that Windows install updates on my PC yesterday. Not a happy Bunny!

  Hi valsturrock,

  Update that you installed before the problem?

  To view installed updates, you can follow these steps.

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.
  Please post back and we do know.

• Unable to connect to the internet after installing updates

  Original title: I can't access the internet after running the latest updates! Please notify.

  I can't access the internet after you run the last update! Please notify.

  Hello

  1. What is the error message that is disayed when connecting to internet?
  2. what type of internet connection do you use?
  3. Please post the KB number that was finally installed update.
  Please follow the links below to elp solve the problem.
  Method 1
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2
  Start the computer in start mode minimum avod conflicts with third aprty software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: When you have done all the troubleshooting steps, follow step 7 of the article mentioned above to start the computer in normal mode.
  You can run this tool and display the results.
  
  Internet Connectivity evaluation tool
  
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
   
  Method 3
   
  Step 1
   
  Start in safe mode with Networking if you have awired connection and troubleshoot completed the question.
   

  Description of the safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Step 2

  a. turn off your antivirus software and firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  b. disable your firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• Windows 8 stuck on installing update 1 of 3

  I have a laptop Acer in Windows 8, I got 2 months ago. I turn it off and it told me to update so I let him. It says on my screen "Keep your PC connected that much. Installation of update 1 of 3 ". It has been like this for 16 hours now and I don't know if I should turn it off by pressing the power button. I'm going on vacation soon and I can't leave here forever. Help, please? Thank you.

  Hi Cayley,

  This issue would have occurred due to the system incompatible files associated with Windows updates. These files can be either missing or damaged.

  Refer to the help article and check if that helps.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  Note: When you use the 'Refresh your PC' tool, your computer will render you the current Windows installation to the original installation version. This method requires you to reinstall all updates that are not on the installation. Applications that you have installed the drives or Web sites will be removed. You will find a list of applications on your desktop.

  Reference: http://windows.microsoft.com/en-US/windows-8/troubleshoot-problems-installing-updates

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• My laptop is stuck at "Installing Update 2 of 5" and will not stop or start.

  I went to close my laptop (toshiba satellite) earlier today and after several hours noticed he did not close, but was locked up in the "if it please do not turn off or unplug your machine. Installing Update 2 of 5 "with the circle"busy ". 'Ctrl alt delete' tried to get up but Task Manager no response. Power finally closed off and tried to start but same "install update" screen comes up which is locked. Tried to boot into safe mode with F8 key but used. I have no installation disc that Vista has been loaded on the machine again but I have created a recovery disk when I started the laptop because that's what he recommends. I have Vista Home premium. Help please. Thank you

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Update to SP3 stuck on installing update 2 of 3 to 12 hours

  The message installing update 2 of 3, without shutting down your computer.  What should I do?
  Will it hurt if I shut down and re boot?

  Reboot & see what happens.

  You can view the log of the Malicious Software Removal Tool if you're curious. It is usually located...

  C:\WINDOWS\Debug\MRT. LOG <>

  ~~~~~~~~~~~~~~~~~

  Tip: Ideally, you would never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE! Instead, uninstall the update, Service Pack, or the IE patch & reboot. If that does not resolve the problem, then try System Restore.

  Tip: Should choose a good Restore Point will leave you with a "restore incomplete. Your computer cannot be restored... "error, see http://bertk.mvps.org/html/symantecdoc1.html

• Update Vista stuck on installing update 4 of 7 for 2 hours

  During a normal shutdown, I got the message updates were insalled (Vista Home Premimum).  For two hours, I was stuck on the installation of updagte 4 of 7.  How should I proceed.  Power off, to let him stay or what?  If I turn it off, which option to choose on a reboot?

  klh1955,
  If you are still having this problem, then normally choose the boot option and see if it will fill or load normally.  If you enter Windows and not all updates have been installed, you can install the updates one at a time and see if one of them is having a problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPad is connected to internet but cannot install update because he says that I'm not connected

  My ipad will not be updated to the latest version because he says that I am not connected to the internet, but I am

  You want to wait a while before putting the iPad 2.  There were people who got their ipad 2 has hung up.

  Please read this long list of problems.

  With the help of iPad

  R

• Stuck at installing update step 3 of 3-0 percent. who's going well then reboot system. This happens in a constant loop for ______

  Windows won't let me. Installation of updates stage 3 of 3, 0% complete, restart, return to the same point, reboot, etc etc. Don't know administrator password because Dell only gave me.

  • The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
    After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.

  Contact Dell about the password if you need.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Stuck on installing updates 1 of 22

  I use Windows 7 on a Compaq laptop.  I tried to reboot this morning and received a message indicating "do not turn off or unplug your machine." Installation of update 1 of 22 "which was there are five year and a half, and there seems to be no progress.  I leave the recommended updates installed, so I don't know yet what he's trying to update currently, but I've never had _any_ update take long in the past.

  Any suggestions on the way out, or at least confirm that updates are really progress and believe a delay?

  Thank you.

  Hello

  Try the link below:

  http://support.Microsoft.com/kb/971058

  Just look around, if you do not not it, then do you.

• My creative cloud does not open. When I open it, he continues to say "installing update".

  My creative cloud does not open. When I open it, he continues to say "installing update".

  Please see:

  Creative cloud is "Installing Update". No percentage or error code.

  Connect to CC - stuck on "Installing update..."

  I hope this helps.

  Concerning

  Megha Rawat

• Creative cloud is stuck doing the update.

  My creative cloud is stuck at the installation of the update... Sitting on 0%, is no nothing... exit it and re - click on it and it's always the same. How can I solve this problem?

  Please refer connection to CC - stuck on "installing update...". »

  Hope this will help you.

  Kind regards

  Hervé Khare