Connect via Putty KVM ESXi
Hello
I need to know how to connect to a ESXi host.
-> I can connect to KVM via putty
-> Now PuTTY inside, how to connect to the ESXi host?
Thank you.
You will need to use viClient to activate SSH via Setup > security profile.
Shell SSH & ESXi are disabled by default, you will have to start these services to demon.
In PuTTY, use the root or admin credentials
Tags: VMware
Similar Questions
-
Unable to connect via the Internet to my ESXi server. Help, please
Hi, I had a server ESXi 4.1 at home. When I try to connect via the Internet, it is not working.
I put ESXi server to firewall and still, I can't ping my server even.
No idea why?
Kind regards
Pawel Lenart
Sit behind your firewall router esxi, transfer 443 to esxi management IP and ensure that management network vmkernel has the internal IP address of router as its default gateway.
Please give points for any helpful answer.
-
Windows 7 virtual machine - stop even if someone is connected via RemoteDesktop
Hello
I have a machine virtual windows 7. It runs on a host SLES 11 SP3 with KVM. When the host wants to stop the virtual machine, it signals the vm via ACPI. But if someone is connected via RemoteDesktop, virtual machine refuses to stop. KVM waits a while, then turns off the virtual machine. Is it possible to stop a windows 7 even if someone is connected via RemoteDesktop?
Something like for example a registry key?
Thank you.
Bernd
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with Windows.
I suggest you post your query on The TechNet Forums , because we have experts working on this type of questions and for you help the better.
Check out the link:
https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Adding user to access the Service Console via Putty
Hi guys
I'm quite new to the world of Vmware, so please exuse me if I look trivial.
Basically, I want to create a user in order to access the service through PuTTY console.
I tried with the root , but it says access denied. I have read the forums and I know that I need to create a new user, and then get to KNOW, but could you please tell me how and where I can create this user as I can only find Permissions tab for ESX1 (our esx server). What I need to for this to the service console physially enter the sever room or can I create this user using one of my domain accounts for VIC 2.5
If I can do or could you please guide me further
Also is it possible to use the service of the VIC, if so how.
I would be very grateful if you could give me an answer for what I send the vizionsupport logs from the console using some of the linux (vmware controls), I think that I can do that by logging in on the ESX Server service console.
Concerning
Rucky
To add a newuser you would do the following in the console of the ESX host.
useradd username (where username is the name of the user account)
passwd username (This will prompt you for the password for the user)
Now this user must be able to connect via SSH
You can then run su - (you will be prompted for the root password) that will put you in a root shell
Also, you could edit/etc/ssh/sshd_config (using vi or nano)
and change the following line
Of
PermitRootLogin not
TO
PermitRootLogin Yes
type of service sshd restart (you should do this in the console) this will then allow you to ssh to the system as root.
-
If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10
After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well
Hi Pharao-nael,
I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.
Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
Configure and use third-party Bluetooth - Apple Support Accessories
Turn off pairing a Bluetooth accessory
To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.
When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.
Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
Pair your device with a Bluetooth accessory
- On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
- Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
- Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.
When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.
Thank you for using communities of Apple Support, cheers!
-
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
Yes, I'm doing exactly this with the same put in place.
If the problem persists the next relative to the following articles might help you.
-
Simultaneous connect via Dock and via Bluetooth?
Forgive the newbie question, but I use my Iphone6 to connect to my stereo system through a dock and also want to connect via Bluetooth to a speaker in a room? This can be done? Thank you!
# You can only select an output for the audio stream. You cannot output audio to the dock and bluetooth connector at the same time.
-
How to disable automatic updates of ios connected via wifi
How to disable automatic updates of ios connected via wifi
- Open the settings app.
- Push App and iTunes Store.
- In the automatic downloads section, you will see an element called updates.
- Press the switch to turn it off
-
Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.
Try using using the Image Capture (in the Applications folder)?
-
drive external hard connected via usb hub powered Time Capsule guard fall...
Hello.
Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.
When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..
After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.
What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?
Just seems like something somewhere that expire, causing it to drop the connection...
Thanks for your useful suggestions to fix this!
Is your TC the Gen5, model AC?
I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.
What is the speaker (the box is powered)?
Quality of the envelope varies a lot... What is it??
If this is the typical brand X... Plug it into your Mac. is it reliable?
Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.
I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.
I start TM. After a few minutes the backup fruitbodies.
Check in the finder, it has created the sparsebundle and works.
Can you have a USB hub between the external hard drive and time capsuls?
It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...
Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...
The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.
I started a thread for a database just now... has not progressed much.
-
Portege M700 - 3 G-connection via Novatel & T-Mobile
Hello
My M700 is around the age of 12 months and now I tried to connect via a 3G connection to the internet. The build-in 3G connection manager Novatel (called MobiLink) offers 3 pre-installed configurations, none of them work for my T-Mobile SIM card.I can't find any clues (Toshiba or Novatel or T-Mobile) how to set up a working connection. I try to create a new profile, but have no idea on demand "APN:" or other necessary parameters.
Is there anyone with experience on these issues with a useful suggestion?
I know that my T-Mobile card user-number and the ANKLE associated with the SIM card.Thanks in advance,
PeterHi Riedel,
If I were you I talk with T-Mobile and ask what APN you should use. A digital CAMERA is basically a string that you enter to dictate the software to connect to (e.g. TMobile), T-Mobile will be able to tell you what APN you must try to connect to usually.
Good luck
Paul2008.
-
Satellite C660-1RQ cannot connect via HDMI to the NEC projector
Hello.
I have laptop Toshiba C660-1RQ.
It can not connect via HDMI to the NEC projector.
I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...
And my HDMI works with monitors, TV (but sometimes!), etc.
I don't know what to do...
> And my HDMI works with monitors, TV (but sometimes!), etc.
If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.
What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?
The use of Fn + F5 keys can toggle between internal and external display.
-
Satellite M30-106 - does not connect via radio
Hello
hope someone can help im having headache with my Satellite M30-106 problemsI can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.
I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong
Regards wayne
Hello
If you try to connect to your router, you will ask for a password or what exactly is going on?
Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download DriverAlso make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.
What operating system do you use? Have you installed all service packs and patches?
-
Re: Satellite L300D - unable to connect via WiFi network
Any help please? -I just L300D with Vista professional.
Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.When going through "Toshiba assist" message arrives "this wireless network device is disabled.
Please activate the device"- button wireless is activated with light yellow?
any ideas?
Are you sure that the laptop wireless switch is on?
Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.Also try an update of the WLAN driver. You can find it on the Toshiba site:
http://forums.computers.Toshiba-Europe.com -
New Mac Pro does not connect via WiFi to my ATT router.
I have a brand new Mac Pro garbage but I'm unable to get it to connect to my ATT wireless router. My phone, the laptop and the TV do it but not my main computer. Oddly enough, I AM able to connect via WiFi for the Mac Pro to my laptop. Any suggestions?
Please post your question in the Mac Pro support forum... Mac Pro
If you have a question about one of the Apple routers... the AirPort Express, AirPort Extreme or Time Capsule airport... the products pictured below that we support in this forum... we can probably help you.
Maybe you are looking for
-
When you try to play island thunder Ghost Recon, I get the message that an error has caused that caused the blocking of the work programme. I can't find the cause of the error or any information about the problem. He stopped working at the same time,
-
Windows 7 Windows Update error 80072f8f
When you try to perform a windows update, you may receive this error. I just wanted to post that I found the solution in that the GTW CyberTrust certification authority is not approved in Internet Explorer/Windows 7. Installation of the CA in trusted
-
Connect to the printer error code 'the operation failed with error 0x0000000a.
not abe to have student access network printers
-
Z10 blackBerry 10.0.9.2372 The application does not allow the user to download documents or files directly on the device/SD card. This means that a person is unable to download a file for offline access. Please provide an option to download and save
-
Viewer for Smartphones blackBerry not liked my emails on my phone
Hi, I have a problem frustrating with my bold 9930 I bought 02 April 2015.I may only display emails back until the date of purchase and telephone recording which is 02 April 2014.I want to be able to access my old emails on my phone. How can I get my