Portege M700 - 3 G-connection via Novatel & T-Mobile

Similar Questions

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• Hibernation and Novatel Wireless Mobilink - Portege M700

  Hello!

  I have a little problem with my UMTS through Novatel Wireless Mobilink connection. If I establish a connection and my Portege M700 leads in the idle state (hibernation), I can't establish a connection after the idle state longer. It seems that the UMTS device would be disabled.

  The button to connect/deconnect-in MobiLink is disabled.

  Does anyone have similar experiences?
  Maybe someone can give me a tip?

  Many greetings
  Steffen Bischoff

  Hmm I m not a protégé M700 owner and I don t use the 3G connectivity, but I read about the problems of Hibernate with Win Vista and XP
  In my case I couldn't t connect WiFi after the reactivation of hibernation.

  My solution was; Windows update, updated the driver WLan, updating the BIOS and disable the option in the properties of the energy saving device.

  That's all I can suggest...

• Portege M700 - Modem UMTS Novatell missing drivers for Vista 64 bit

  Hello

  are there drivers for the UMTS modem yet? (I have found that none on the Toshiba download site) It's the only thing that prevents me from using a Version of Vista 64 bit on my Portege M700.

  Could you (guys from Toshiba) please release the 64 bit Vista for the Novatel UMTS modem drivers?

  Thanks in advance,

  Matthias

  Hello

  You are right. Novatel Wireless Mobile Broadband Drivers and TOSHIBA 3 G RF Power Control Utility are not available, but maybe you can check if Vista 64 - bit DVD recovery exist for this model of laptop.
  Check it out under the https://backupmedia.toshiba.eu/landing.aspx

• Re: No display on Portege M700

  Hello

  My son put his computer bag stuffed with his laptop Toshiba Portege M700 inside his office (just out of warranty).

  The laptop shows no sign of injury, but on turn it only "all the right noises", but there is no display on the screen. If the laptop is turned on with the charger connected and then some colored vertical bars appear, and then they fill with white, but nothing else.

  We tried to connect an external monitor and pressing Fn + F5 and the vertical bars disappear from the internal screen and it goes totally black, but nothing appears on the external monitor. Pressing Fn + F5 new returns the vertical lines at random on the internal display.

  We have also tried to start the laptop in the Mode menu without failure by pressing F8 during the initialization of the laptop, with or without an external monitor, with or without the Fn + F5, but you cannot get any video on the monitor either internal or external.

  Fact it seems that maybe a connector was dislodged by the shock of the fall, that you think that the laptop is now pushing up daisies?

  Any notice received with gratitude.

  WIBs

  To be honest I n don't know which connector you want to say but there is no pic on external displays to be a serious problem.
  It seems impossible to send the video signal via the video out port.

  It is not easy to offer an accurate diagnosis on this virtual path.
  What do you do now? Try to repair it or what?

  Maybe you should contact Toshiba service and ask for verification. They can run diagnostic tools and tell you what is defective, what needs to be replaced and how much it will be cool. Then you can do what to make the decision.

• Portege M700 searching for Mobilink ConManager be used with Windows 7

  Hello

  I upgraded a Portege M700 Notebook Vista (of recovery) for Windows 7 (32 bit). Most of the devices and drivers where found and assigned automatically in the installation process, some more later with the Toshiba/Microsoft software updates. Also the driver for the Modem 3 G integrated has been installed and says "working properly".

  Feature: "SM Bus Toshiba broadband (3G HSDPA) minicards Modem.
  Pilot: "Novatel Wireless Inc." / version 3.0.0.3 / Date 14.09.2006 (signed by Microsoft)

  But I can't find software for Windows 7 to make use of the modem (establishing a connection)
  Formerly "Mobilink connection manager' does not show upward in the Toshiba download page (Windows 7) and the old version (VISTA) does not (stops without error message installation procedure).

  Y at - it no hint how to establish a connection 3G with the M700 (Win7) or a link to a working version of the Mobilink for Win7 connection manager?

  Thanks in advance...
  Peter

  Post edited by: Riedel

  Hello peter

  You have upgraded to Vista preinstalled or you have installed your own own Win7?

• TrueSuite Access Manager on Portege M700 - 13p

  Whenever I start my new Portege M700 this program says that the drivers are not installed for the fingerprint reader and t testing install again. Install TrueSuite Access Manager starts and then it asks me to restart my PC. Every time. I'm currently ignoring this but it bothers me.

  I can connect with the fingerprint reader, which suggests that the message is bogus.

  Recommend a way to solve this problem?

  I'm tempted to remove the device from the hardware Manager and uninstall the software, then restart, reinstall the software and then redetect the hardware...

  Anyone got a better idea before that I'm wasting my time?

  See you soon,.

  Rob.

  I agree with you and I think that the first step, you can try to remove preinstalled software and install the latest version of the Toshiba support page.

• I am looking for a card PCI UMTS for Portege M700

  First of all Hi everyone, as above mentioned in the title is on the Portege M700, I am looking for a card PCI UMTS for this model have here an 8775 Sierra lying around, but unfortunately, it is not recognized in Win7, I can time can someone tell what card for this laptop is, or even something where I could get so...?

  Thank you apologize in advance

  Hello

  You need a module 3G Broadband?

  As far as I know that some of the Portege M700 series were equipped with the 3G module I think that it s of Novatel but I m not sure leave

  However, if you need a framework for the Toshiba notebook that would be consistent for sure, the best place for the purchase of these parts is your ASP.

  Guys could check what parts are compatible and could order from Toshiba if that would be really necessary

  Welcome them

• Portege M700-130 + Portreplicator + external display

  Hello

  We have a Portege M700-130 with the PA3508E-1PRP portreplicator and have a problem with the external display (monitor) connected to the portreplicator.
  The OS is Vista Business. The external monitor is an EIZO S2401WE-GY.

  Now the question:
  * Can you just place your Portege in the portreplicator, start it with the key to the portreplicator and get an image on the external monitor to the connection of the operating system image without doing anything on your laptop? *
  It would already help us if someone with the Portege even and a portreplicator can give us his experience about it.

  Because we can't, but we have absolut want to achieve or better should. We have tested all the settings in the power and hardware configuration options. The point is: when the Portege gets started without portreplicator and is remplace replaced offshore in the portreplicator, then began with the portreplicator the external monitor goes black when loading of the connection of the operating system image. Only after that the laptop screen is fliped open, we get an image on the external monitor.

  Help or an answer, I'd be very appreciated. Thanks in advance!

  Hello

  One of my friends has tested this on the Portege M700 Vista OS.
  It connected the external monitor using a VGA (analog) and DVI port.

  It seems that it works as you suggest in your ad.
  The Portege lid is closed and connected to the external monitor.
  You do not need to touch the Portege M700. He should start by pressing the key of the duplicator.

  Welcome them

• Portege M700 - 4 devices called Data Interface in the Device Manager

  I am facing a problem with the toshiba portege m700.
  In Device Manager, I have 4 devices called Data Interface.

  I completely wiped the hard drive and formatted in ntfs.
  Then installed Windows Vista 32-bit and installed all the drivers available on the toshiba site, but I find myself with four instances of data Interface in other devices in Device Manager.

  Can anyone help?

  Hardware ID data interface:

  USB\VID_0930 & PID_1302 & REV_0000 & MI_00

  USB\VID_0930 & PID_1302 & MI_00

  Have you installed the O2Micro smart card reader? O2Micro Smart Card Reader which allows you to authenticate on your computer with a smart card and a PIN code.

  In addition, you should check if the Wireless Mobile Broadband of Novatel has been installed too!

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• Portege M700 - Vista operating system factory reset

  Hi guys, I would really appreciate help, please

  :)

  I have a problem with the reset procedure factory on my Toshiba Portege M700 Vista,.

  what I do is the following:

  1 turn off the computer by pressing & holding down the power button
  2. turn power on by pressing the power button
  3. I invite me for the password (BIOS HARD drive), I enter pasword
  4. I press F8 and go into the Advanced Boot Options
  5. Select repair your computer, press enter
  6. I select correct keyboard in pop - up, System Recovery Options after
  7. I connect as a user by entering my password
  8. I select Windows complete PC Restore

  New window appears, saying "Restore your entire computer from a backup" - Windows cannot find a backup on the hard disk or DVD on this computer. The area where I could specify the path to the file is grayed out. It is not that I now have the road, but I guess that there is a hidden with the Vista partition install files that it contains (?)

  "" In a small pop-up screen (on the top one), there is a similar message: "no valid backup locations could be found..."

  In an ideal world, I would use the backup (plant) from the internal hard drive of origin, rather than purchase and waiting for the preservation factory / restore DVD...

  Thank you much in advance!

  Hello

  The explanation is quite simple. For some reason, your laptop can not find recovery saved on your HARD disk image. I can't say why, but this can happen if the recovery image is deleted, removed to another folder, or in the case of modified HARD drive partitions.

  Recovery image is set with the so-called markers and when you start the image recovery Search installation wizard these markers. In the case where the markers are not found, you will get this message on the screen.

  So now you have the problem because the mounting will not work. Only option for you now is to install the original recovery image using recovery media, but I'm afraid you did not create one, right m?

  You must order the original Toshiba restore disk or you can install the version of the OS using the Microsoft installation disc.

  What do you think of all this?

• Portege M700 and Windows 7

  Hi all

  I installed Windows 7 RC on my Portege M700, and everything was fine, except:

  -Intel(r) Management Engine Interface (show on the device as a PCI Simple Communications controller Manager);
  -Novatel Mobilink to the Novatel Wireless Broadband (3G HSDPA) SM-Bus minicards Modem integrated (EU870D) (list on the device as 4 Interfaces of data manager).

  I used the drivers on Windows 7
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814& rpn = PPM70U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768662 and all fine wenf.

  I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager.
  But when I try to install the v2.02.27 from Novatel MobiLink available [here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=2 & selFamily = 4 & selSeries = 157 & selProduct = 773 & selShort Mod = 684 & language = 13 & selOS = 26 & selType = all & yearuploa d = & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = 8 & page = 2 & startPage = 1] he justs roles back the instalation before it's over.

  Do you know if toshiba plans to deliver a version of Mobilink from Novatel compatible with Windows 7?
  And what of the Intel(r) Management Engine Interface? There will also be a compatible version?

  Thanks in advance guys...

  Hello

  > I even managed to get the drivers for the Modem from Novatel minimap from a previous version and accepted Device Manager. But when I try to install the v2.02.27 from Novatel MobiLink available only here it justs roles back the instalation before it's over.

  The point is that you tried to install the driver on Win 7 OS Vista and this could be the problem. Seems the Vista driver is not supported with Win 7.
  Of course, some drivers Vista would go with Win 7 but not all drivers are compatible.

  I think you have to wait until the drivers Win 7 for the 3G module would appear.

• Portege M700 - 7004V Display Device change Utility does not

  Hi all.

  I have problems with the utility to change device display on my Portege M700.
  I am in charge of a school district with 110 Portege tablets, but I can't understand it.

  For some reason any when I press Fn + F5 (which is the default configuration to switch display devices), nothing really happens.
  The screen flickers very quickly as if she is still looking for another device. Press it again, the same thing happens.
  Press it again, the screen goes black (as it should), but even when nothing is displayed on the projector connected to him.

  On all the other 109 pills I, change display utility works very well.
  In fact, if you hold down FN and press F5, but continue to hold down the Fn key, a box appears and tells you which device you try to switch to.

  Here is my configuration:

  Windows XP SP3 (up to date)
  New version of:
  Intel graphics drivers
  Toshiba controls
  TOSHIBA Hotkey utility for display devices
  Toshiba display device change utility
  Toshiba Mobile Extension

  This computer is imaged from the same image that have other computers (which all work.)

  Is there something in the registry that toggles? Is there something in msconfig, that I can check? This problem is to get the best of me!

  Thanks to anyone with the time and patience to help!

  Hello

  To be honest, I put t know what might be the problem, but it is recommended to reinstall the necessary drivers.
  First of all, you need the common Modules!
  This tool must be installed first.
  Then you can try again to install the v2.0.1.9 change of display device. and then the Hotkey utilities for display v3.4.5.5 devices

  Also the display driver should be updated and if necessary check the update of the BIOS.

• FN + F8 does not work which allows the Wan on Portege M700

  Hi all

  On my Portege M700 (Vista), I can see that by pressing FN + F8 should scroll through the devices and activate the internal device of WAN (HSDPA).

  But it doesn't seem to do anything.

  What could I do wrong here?

  Hello

  As far as I know that some models are equipped with the Wireless WAN functions.
  Did you buy the m700 with WAN functionality?

  Usually the WAN indicator lights or flashes blue when the Wireless WAN function is activated.
  The indicator will light up or blink to indicate the status of the connection to the WAN service.

  But note!
  The WAN card must be installed to use this feature. Some models are equipped with such a card, but NOT all!