Satellite C660-1RQ cannot connect via HDMI to the NEC projector

Similar Questions

• Satellite L755-11J: its delay via HDMI if the microphone is connected

  I have a Satellite L755-11J and when I connect it via HDMI but the movies and MP3 sound is perfect and synchronized.
  When I plug a mic, I have a delay of about 1 sec.

  My sound card is Conexant and I installed the latest drivers. (ver.8.51.1.0).
  I tried all the possible configurations in the properties of the Microphone, but the problem persists!

  Any solution to this issue?

  Hello

  Check the status of the webcam in Device Manager
  Can you see the webcam device in Device Manager?

  As I remember the webcam can be disabled and enabled in the BIOS.
  Please check if the webcam is enabled in the BIOS.

• Satellite C660 - 115 WLan connection only works when the power cable is connected

  Hello

  A few weeks ago, I bought a Satellite C660-115. I want to surf the internet anywhere in my house without any son/cables.
  On the first day, I had this problem: when I disconnect _power_ cable, the wireless connection will stop working.

  The Web page on my screen will always be there, but a new page loading is a problem.
  It is sometimes useful to recharge (by pressing F5), - sometimes not. It is always useful to "ip address of repair", but not for long.

  The only solution is to atach regardless of how much power the battery has still the power cord.
  When I do, it is no problem whith the connection at all.
  I went back to the store where I bought it, they related to their own wireless network and they have had the same problem after a few minutes. In the shop too attach the power cable solved the problem.

  So the problem must be in my lap top, not in my network (modem or almost).

  Doesn't this all seem familiar, and if so, how can I solve this?

  I hope that my English is understandable, I live in Holland.
  Thanks in advance!

  Here is the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

  Change options for saving for the Wlan in Windows 7 power management

• Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

  Hi all

  I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

  I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
  Any help would be greatly appreciated!

  Care of my system is as follows:

  Processor: 2.66 GHz Intel Core i5 480M
  RAM: 4 GB DDR3 RAM
  OS: 64 - bit Windows 7 Home Premium
  Graphics card: ATI Mobility Radeon HD 5650

  > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

  The crackling is in from the TV speakers. Right?

  Can you hear the Crackle even using headphones or speakers for laptop?
  If not, then I think that this problem could be related to his driver.

  In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

• Satellite C660-1CZ cannot connect to my wireless router

  Hello comrades,.

  I have a problem to connect to my wireless router.
  We have 3 notebooks here at home, and all are able to connect.
  But my Toshiba laptop cannot connect. I don't know why...
  The latest drivers are installed for RTL8188CE.
  I'm sure it's the latest driver from 2011.

  My operating system is Windows7.
  I bought yesterday and tried everthing to connect with my easybox 802.
  I also changed some settings on the router.
  Can someone help me pls?

  On other laptops, the SSID of the router's Easybox-D77327, but my Toshiba shows just Easybox-D57327.
  Its not the same SSID but the router is good.
  In my view, the problem is that my laptop shows me a bad SSID of the router, but how to solve the problem...?

  You have the same problem when using the AC power mode and battery as well?
  Can you connect to the router if WLAN is not secure?

  An error message occurs when you try to connect to your router?

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.

• Satellite C660-11KLoss WiFI connection on the battery

  I recently dgraaged myself in the 20th (Yes 20th) century and went wireless.
  I have a portable Satellite C660 - 11K which connects to 1683B 8 Talk Talk. When using the power cable connection is perfect.

  However, when you use the laptop battery, internet connection is often lost.
  The signal strength is very strong with and without connection to the sector.

  Any ideas please?

  Hello

  You will find an answer to this question if you want to use an advanced Forum search option.
  You will find these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59143
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58744
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57685

  Please post feedback after you have fixed this!

• U2715H, connected via HDMI or through DP?

  Hello.

  I have a U2715H monitor and consider buying a more. My video card has only one output port of DP. Where my questions:

  1. If I connect the second monitor via HDMI, the U2715H still will work at maximum capacity?

  2 would it not be better to use a CDM (male) to HDMI Cable (male) to connect the monitor instead of a (male) HDMI to HDMI Cable (male)?

  3. how worth it would be that would buy a new video card (which has several ports of DP) it?

  Note: I hesitate to do that because I met major problems after installing a new map recently and had to revert to the original. But I'll try again, if my monitors don't work 100% connected via HDMI.

  Thank you!

  Display port will give you 4K.  HDMI will not

• SP2309W won't go into energy saving mode when connected via HDMI

  Hello

  I just got 2 SP2309W, and I love them, the only problem I encounter is just one of them (the one connected via HDMI) is not in power saving mode, even when I turn off my laptop. Is anyone else having the same problem?

  I have connected the monitor via VGA and DVI and the energy saver works fine but it does not work with HDMI

  I have a XPS 1530, Intel Core 2 Duo processor T9300with a 256 MB NVIDIA GeForce 8600 M GT video card.

  My XPS has a HDMI and VGA input so I have a monitor connected via VGA and the other via HDMI and even when I go around, always one connected via HDMI is not in the standby power mode even if the laptop is turned off (or when he goes to sleep).

  Thanks for your help,

  Ivan

  We left three SP2309Ws on all night to disconnect the HDMI cable and in STFC mode and came this morning to see the message from MONIQUE always there. They all didn't say, 'no HDMI cable. This is normal. In fact, we have tested on several other models of monitors and they all do the same thing.

• System Restore does not not on windows vista & connection with HDMI to the TV problem

  Hello, we had a problem with the restoration of the system, that we are on family vista premium, we continue to get the message there was an error unspeccified and system restore did not complete. We don't have a norton security, but use AVG professional. We tried several different restore points with the same result. Also maybe it's a coincidence but connect us quite often the PC via HDMI to the TV, it has always connected without problem, it has also stopped working so the reason we thought that system restore has been the answer. Any ideas would be received with gratitude thank you

  Hello

  Back up your files and perform the Inplace upgrade. That should do the trick.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

• UDP connection via wifi in the name of 8320 tunnel met IOException:Invalid

  I am new to Java, trying to open a UDP connection on wifi in my BB8320 (V4.2.2.180).

  I have connected to my 8320 to a WiFi network and that you can access Web page in the browser (configuration: Wi - Fi browser).

  I tried with: Connector.open (DatagramConnection) (datagram://192.168.1.101:5009) and Connector.open (DatagramConnection) (udp://192.168.1.101:5009), but all got IOException:Invalid name of the tunnel.)

  Here's my Mobile Network Options in the camera: Data Services - on; Connection preference - Wi - Fi only.

  The same code works fine in the emulator, tested in a wired network.

  I googled this IOException, it seems that the TCP APN cannot be null, I tried with blackberry.net cmnet, wap.voicestream.com and even the name of the Wi - Fi connection, everyone met time-out problem.

  I have some questions below:

  1. is there any configuration that I missed?

  2. the UDP connection via wifi check the AFN? The APN configured in the emulator is null.

  3. do UDP and TCP connection API need permission in the device?

  Appreciate for any suggestions!

  Sam

  I did in the past, and IIRC the trick was to add: «;» interface = wifi; deviceside = true"to your connection string. for example:

  Connector.Open ("udp://192.168.1.101:5009; interface = wifi; deviceside = true ")"

• Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector?

  Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector? My projector has HDMI but no audio output. Thank you.

  You can set the audio output to the airplay speakers in settings on Apple TV

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• HP LaserJet 1200: HP LaserJet 1200 connected via USB to the PC with Windows 7 is not redirected in DRC

  Hello.

  HP LaserJet 1200 connected via USB to the PC with Windows 7 (32 bit) and works fine (latest drivers via Windows Update installed).

  But when I have connected via RDC (Remote Desktop Connection) for PC with Windows XP and try to print from this PC to LJ1200 - it is not redirected in a remote desktop session and I did not see in printers and Faxes folder.

  Other printers from PC with Win7 works fine via DRC (XPS Document Writer and PDFCreator).

  During this time when I do the same thing from another PC with Windows XP, LJ1200 (connected via USB to the PC) works very well through the DRC.

  Anyone know how to make LJ1200 to be redirected in a remote desktop session?

  Thanks in advance.

  For more information, here are 2 possible solutions:

  1. put two computers in the same workgroup and then share the printer and install from the remote computer.

  2. best solution: install on PC with Windows 7 drivers for Windows XP (PCL6) - it works very well as a redirected local printer via DRC!

• Tried everything: 1 address, but not able to connect via HTTPS to the server:

  Hello

  I am trying to connect to the third of the OSB business service web service.

  objective WS is protected with SHA1 base 64 encoded password.

  I am able to connect to the service target of SOAP UI. I am also able to Telnet to my server for dev to the URL of the WS.

  But when connecting from OSB BS I'm tried them all: 1 address, but not able to connect via HTTPS to the server: error.

  Can you please help me solve the problem.

  I tried different policies, but still does not work.

  Kind regards.

  Problem solved. We need to use the proxy server.