Connected applications

Similar Questions

• Y at - it a Microsoft Remote Desktop Connection application for iPAD?

  Hello
  I would like to know if there is an IPAD application for Microsoft Windows Remote Desktop Connection for RDP'ing in Microsoft XP computers.

  Thank you

  Hi Mirza,

  Currently, there is an app for the iPad to Microsoft Remote Desktop connection. There are plenty of others on the Apple market, and I suggest to search for on iTunes Remote Desktop connection:
  http://www.Apple.com/iTunes/

• Mobile Xperia Z2 D6502 unable Email data connection application to the user after the restriction.

  Hello

  I use D6502 Z2 Xperia.

  E-mail application default of the Xperia unable to use the Mobile data connection after she returned to "Restrict the database" defined.

  It works fine with WiFi. I tried resetting the application Email and MS Exchange Service, but the problem is still there.

  Is there a solution for this problem.

  This problem has been resolved after update to Android (Lolipop) 5. Thanks Sony.

• Failed connection application designer

  I installed peopletools 851 with system db, but I can't connect the application with PTDMO/PTDMO Designer
  should which userid I use?

  I probably doesn't care enough of what you are doing:
  «+ * Note *.» If you install a * PeopleSoft PeopleTools database system * or a database sent on +.
  + PeopleSoft PeopleTools 8.51 and you apply a required to install patch PeopleSoft PeopleTools, skip +.
  + the steps in this task. Instead, follow the instructions in the RFSO user to patch to apply the database changes, and +.
  + and then continue with the installation to the task running additional Scripts Data Mover. + »
  Assuming that you install Peopletools database system, you can skip the task a 7-16 and go directly to the task to 7-17 and following.

  Nicolas.

• Type of connection "Application Server" with the HCM91 model

  Hello
  
  I can't use the connection type "Application Server" instead of the Oracle with application Designer:
  
  PeopleTools release (8.50) for server web "PSTOOLS" is not the same as the Application Server PeopleTools release (8.50.02). Access denied.
  
  
  Thank you

  Gainsroses-
  That's what I was expecting. PSIDE and AppServer are built on the same set of libraries. This means that a rule strict version (down to the patch) should be applied. This is mainly because of things like the structure of the request buffer which is exchanged between the client and the server. When he uses the connection to the DB connection ODBC directly, and therefore has no need to worry about serialization / deserialization of the nuances that can affect connections PSIDE-AppServer.

• Reset password connection application

  I created an apex application and some user accounts for access using authentication apex. When I created the account, I made sure that the value of 'Require change of password on first use' yes but my users are not asked to reset their passwords. What I am doing wrong?

  Connect to your workspace as an administrator and go to home > Administration > manage Services > Set Workspace Preferences.

  Under Login control account settled the account Expiration and locking to activate.

  Scott

• LifeLog is not connection application use

  Hello.   I run Lifelog on a LG G2 with a SWR10 through Sony's SmartConnect.

  For some reason, Lifelog is not recording time spent on browsing activities, Communication, game or video (and maybe others - these are those I'm interested).   I have seen other users with similar problems and tried the suggested fixes: uninstall + reinstall, by disabling App + Cache data and activating / deactivating the Logger switches.  Nothing seems to work for me.

  The application used to log very well but it has not registered the application data for recent months.  He doesn't see I take pictures, steps and transport, but it does not recognize e-mail, browsing, games and video.

  Y at - it other ideas or workarounds out there?  It's frustrating because I chose this device on others, because is a broad view of the cup of the lifestyle.

  Quester! You are a genius!

  It turns out that this option is not available on my LG G2.  After a little research, it seems that LG, in their wisdom, removed this particular option of Lollipop.  However, it can be accessed using a smart procedure, I found on XDA (here).  I copied the appropriate text below for other users of strugglign with the same question.

  "The only way I know to access is through Launcher Nova. Long press on the home screen and select Widgets. Locate the activities widget and drag it on your home screen. When the activities menu opens, scroll down to and then select settings. When the menu grows, scroll down to and then select "Apps with access to use. You can then select and add Applock to the list of apps w / access to use. »

  Thanks a lot again!

• Session connection application to the editing team development feedback page?

  Is there a way to create the link between the demand for personalized feedback and the APEX team development comments pages?

  Scenario:

  1.) as that developer, I fixed the applications so I'm user in workspace APEX developer

  2.) I also document and comment feedback in custom feedback application that runs in the same workspace

  3.) request for personalized feedback to get the list of team development feedback with query like this:

  4.) and then it would be useful to have live 'Edit' - link to the comments with the feedback_id development team Apex

    select   t.the_name
          ,f.workspace_id
          ,f.workspace_name
          ,f.feedback_id
          ,f.feedback_number
          ,f.feedback
          ,f.feedback_type
          ,f.feedback_status
          ,f.application_id
          ,f.application_name
          ,f.application_version
          ,f.page_id
          ,f.logging_apex_user
          ,f.developer_comment
          ,f.created_on
          ,f.updated_by
          ,f.updated_on
          ,p.page_name
          ,p.page_title
          ,p.page_alias
          ,p.last_updated_by as page_updated_by
          ,p.last_updated_on as page_updated_on
          ,f.parsing_schema
          ,f.screen_width
          ,f.screen_height
          ,f.session_state
           from APEX_TEAM_FEEDBACK F
           join APEX_040200.WWV_FLOW_FEEDBACK_TYPES T --APEX_040100.WWV_FLOW_FEEDBACK_TYPES T
             on f.feedback_type = t.id
           join APEX_APPLICATION_PAGES p
             on p.application_id=f.application_id and p.page_id = f.page_id; 
  
  

  And create the link URL for feedback_id field type

  https://apex.oracle.com/pls/apex/f?p=4800:8001:::NO:8001:P8001_ID:#FEEDBACK_ID#
  
  

  But the challenge is to have session_id so there is no need to reconnect to the workspace as Apex - developer.

  Created sample application:

  https://apex.oracle.com/pls/apex
  workspace: imagetest_ws
  username: GURU
  password: meditation
  application: imgtst
  page: feedbacks
  
  

  Rgrds Paavo

  Post edited by: paavo

  Hello

  You can get session global generator id of the package variable without papers and does not support APEX_APPLICATION.g_edit_cookie_session_id.

  Store the value of the variable at the point and use the substitution string in URL link.

  I made these changes to your example.

  Please note that there is a high risk that it will not work on APEX 5

  Kind regards
  Jari

• Connection to Iphoto to mail

  How can I connect application iPhoto for my email accounts to send downloaded photos?

  1. Select the photos you want to send.
  2. Click on the button send, or choose sharing, Email.
  3. Select a size for your photos in the menu drop-down. iPhoto will show you how many photos you have chosen and what will be the attachment.

  If this does not work, try here > If you can not send pictures from iPhoto - Apple Support

• Connect does not show my devices

  The Chrome Extension connect reported that it could not connect to my phone this morning, as it is fairly typical. I usually get running again by launching the Connect app on my phone and set up the Extension Chrome device again. Annoying, but not really a big deal.

  This morning, I launched the Connect application and it all comes with the screen just "Let's get started" as if no device had been in place... apparently losing track of my old camera of Extension Chrome, but also my 360 motorcycle. Heavier sign.

  BUT... I went to re - establish a 360 motorcycle by clicking on the + selection of bike 360 and it takes me to the screen for my watch (mirroring the current configuration - the watch dial, name, etc.) and even said 'Connected' in the upper left corner. But I go back to the main screen of Connect (whether by the return key or click on the image of the watch) and it does not always list the 360.

  Seems to be no way to get the device on the list, even if the app knows he has set up and connected.

  What can I do?

  It's so frustrating that even if I have one totally Motorola ecosystem soup - aux-Noix, I still have problems like this. I could understand (or almost) (a little) if I had another phone of the manufacturer, an other helmet manufacturers and one other manufacturer watch... but it's all Motorola. You would think that they would test at least their devices so that they work perfectly together!

  I had a similar experience after the Android 5.0.2 on my 360 motorcycle. I solved it by United Nations-paring my 360 my Turbo, by restarting the 360 and the Turbo and then re-matching. Then I went to Moto Connect and re-added via +. I confirmed that the 360 showed as connected Android wear on and then returned to motorcycle Connect and confirmed the same thing. After some moments of my bike 360 complain finalization Motorola connect configuration, I went to wear and re - sync apps and everything has been good since.

  I hope this helps!

• SSL Tunneling Application outgoing failure

  Outgoing SSL Tunneling Application error

  Hello dear colleagues,
  I have UTM5 with the latest firmware. The unit works fine now with 3 VLANS / subnets, routing inter - VLAN, SSL VPN configuration, etc. I have an interesting question, but probably one of these questions to someone else experienced and solved (I hope).

  Medical practice I have set this up for actually needs of outgoing VPN tunnel/SSL. I encouraged the VPN on UTM protocols so the initial remote OUTGOING connection goes off flawlessly and allows users to authenticate. My question is when we try to show the remote Citrix server/published apps page. I get an error "request the Tunneling SSL - Failed to connect to server" . I know that the issue must be understood with the ProSecure UTM because I've temporarily removed the UTM equation and put in a D-Link DIR - 655 and Citrix published apps portal page launches very well. I am able to launch a published application and function normally. I pass on the D-Link with the Prosecure and I get the same question.

  I really don't understand what prevents to launch published applications page.

  I'd be more than happy to provide more information that I need to solve this problem.

  Not that it is important, but all endpoint devices are XPSP3/IE8. Yet once, shouldn't matter that customers can bring to the top of the published page no problem when the D-Link is used.

  Thank you
  MED

  ADIT, I've really hemmed and best enemy cela and managed to get a solution in place. Curious, if you have an idea on the terminal services question license I have known which I'll explain a little.

  So, I have disabled HTTPS scanning as you said and it helped the citrix portal page to come; However, the user received an error of connection application failure when they launched an app on the page. The error said that there are not enough licenses available Terminal Server. I am as there is no way in hell that all licenses are in use.

  So I completely disconnected from the remote network via SSL - VPN and not connected from my home network this site remote to see if I would have the same result and no problems to launch the applications of the portal page... basically no problem license Terminal Server services. I tried connecting from the prosecure and received the same error message.

  I wanted to keep HTTPS enabled analysis despite connect it secure by nature implemented with 443, so I spotted around based on your advice and added 4 remote domains to exclusions scan tab (my eyes completely spent during this 1st 10 x (very annoying). I tested the outgoing connection and it helped me successfully citrix portal page, but applications would not launch successfully. I received once again the same error of license to the Terminal Server services, but we expected it because it didn't start with the scanning to disabled .

  so I connected to the remote network and thought that I would allow my client to its remote desktop RDP access. I have configured RDP on his computer to Office XP and the connected failed. I thought at this stage that he had something to do with trying to RDP through the Microsoft UAG gateway used by the remote site. Rather than trying to work through sets of rules with the specialist support network out there, we decided to allow my client to run an IP network connector dry which was all ready helped the UAG. This enabled him successfully to RDP to his remote desktop and run any distance needed applications on the remote network.

  So, it's not what I really wanted to do. I really want to start individual applications of the closed Citrix portal page, but why this issue licenses arose himself the Terminal Server services is a mystery to me. The specialist in support of the remote side has been also blocked down there. He informed me that he has other clients that connect out through boxes of CISCO ASA and they have any problems launches applications of the portal page. If they scan you 80/443 traffic is not relevant because I disabled it completely on the UTM and it did not help.

  So any thoughts on that would be great and I once again thank you for your expertise.

• Windows Microsoft continues to stop my start-up connect to LeapFrog do - what I need to do to get LeapFrog Connect asked to work

  LeapFrog Connect Application has stopped working error message only I get

  Hello

  I suggest you to uninstall and reinstall the application.

  To uninstall the Application LeapFrog connect a Windows® operating system, follow these steps:

  a. close all programs.

  b. unplug everything LeapFrog toys that are connected via USB to your computer.

  c. Click Start, and then point to programs.

  d. point to LeapFrog Connect, and then click on uninstall LeapFrog Connect.

  e. follow the prompts to complete the process.

  Download go to the following link: http://www.leapfrog.com/en/pages/support/product_pages/leapfrog_connect.html?question=application+connect

  See: http://lfccontent.leapfrog.com/cs/LeapFrog_Connect_Troubleshooting_Tips.pdf

• implementation of Cisco Connect on new computer

  Hello

  I just got a new computer and I'm trying to set up Cisco Connect on the new machine, I'll retire the old machine shortly.

  When I try to install, it tells me that he wants to start configuring my router.

  My router is already set up exactly like I want, and I fear that if I continue the installation, it will be clear my current setup and configure the router with the default settings.

  Is it possible to just install the Connect application without changing my current setup?

  Thank you

  Ed

  I did that and Yes just continue with installation that it not to delete my current config on the router. Your good to go...

• Problem using HP Connect with my HP Photosmart C410

  I try to use my printer HP Photosmart C410 HP Connect applications. I can add the device, but none of the applications seem to work with my printer It' was not THAT old. Any suggestions?

  

  HI beachgrl,

  Welcome to the HP Support forums.  I understand you want to learn what printable sheets are available for your printer Photosmart C410 in connected HP.

  Once you are connected to your connected HP account, if you type the link below into the address bar of your browser, it takes you to a page that shows the pads that you already have on your printer. Under the section "printable recommended" there is a search function.  If you type in your printer model it will list available for the Photosmart C410a platelets. The results will be grouped by category.  I've included a screenshot.

  The address that you need to type in the address bar of your browser is https://printables.hpconnected.com

  

• SonicWALL NSA 3600 6.2.2.1 - 14n and Sonicwall Mobile Connect for MAC DNS problems

  Hello

  I wonder if anyone has seen this problem. I just upgraded my NSA3600 to version 6.2.0 to 6.2.2.1 - 14n and now none of my MAC OS x clients that use the Sonicwal Mobile Connect application has no DNS. You can test by IP and use NSLOOKUP to find the records dns, but if you try to ping or access what either by its name it does not work.

  Everything worked perfectly before the upgrade to 6.2.2.1

  Thank you for this information, but it was not useful in this case because everything worked until I upgraded from 6.2.0 to 6.2.2.

  I just got got off the phone with Sonicwall support and there is a bug in the 6.2.2.1 - 14n and they gave me with a firmware fix. version 6.2.2.1 - 14n-HF156864-1n and everything is in working order.