Connected HP - Server errors / cannot add a device

Similar Questions

• HP6510: Connection to Server error-1

  I have the printer wireless HP 6510, who owns the eprint, scanning and different printing applications, that is, disney, etc. I used to be able to use the app and be connected. Everything works except the apps. Whenever I have select this option on the printer screen, I get the error cannot connect to Server error - 1.  Any suggestions you have would be grateully to be exempted excluded me, thank you, Dot

  Hey @DJWeiss,

  Welcome to the Forum from HP Support.

  I see that you are unable to use printable cards via the front panel of your HP Photosmart 6510 e-All-in-One printer. I want to help you with this.

  Front panel inserts have been abandoned on a number of models of printers of this year of release. This means that you will not be able to access this content directly from the printer (without troubleshooting can change that). That said, you can always log on http://www.hpconnected.com/ add your printer to the devices tab and then click on Services and printable to access the same content as before. While this is a different interface, you should still be able to plan the print jobs with the same apps that you liked before.

  I would like to know if this workaround is useful for you. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below by clicking on "accept as Solution" (this will help others find the solution).

  Thanks for posting in the Forum from HP Support.

  Have a great day!

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• Unable to connect to Server error-1 HP 6510

  When I initially installed printer I was able to access the applications, now all I get is an error code that says that I can not connect to Server error - 1.  Is there any solution for this?

  Djenav,

  I wanted to just check and see how things went.

• Internet connection required: Server error: 0x800CCC90, error number: 0x800CCC92

  Original title:

  Windows Mail in Vista

  Can anyone help please.  I tried to open my email this morning - as usual - and it asks me to enter my username and password.  I did it several times but it won't let me and I get as part of the error message: -.

  Internet connection required: Server error: 0x800CCC90, error number: 0x800CCC92

  I have been in contact with the technicians at Microsoft, but apparently they are more supported Windows Mail.  I can access my mail through my e-mail provider, but it's really annoying!

  Internet connection required:

  This has not preceded by a long and complicated URL that begins with https://accounts... ? The idea is that you must click on the link to log in and verify that it is access you your account by filling out a CAPTCHA. Is that what you did? That's happened?

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• Already registered on the portal OnPlus - cannot add a device already enabled/customer

  Hello

  I am registered on OnPlus.

  Then my colleague registered and activated a device.

  I could not activate the device - even if my PC is on the same subnet and can connect to it very well (with the password provided by my colleague).

  When he sends me an invitation for the device - it takes me to the registration page.

  If I get my information from record (again) - I get (not surprisingly)...

  "We had a problem with your submission. Please correct the following errors. This user ID is already registered. »

  Still-, there is no choice because "I am already registered.

  When I connect OnPlus and try to "Add Customer" - I put in the details, then it goes to the activation screen with

  "CustomerX / status".

  To activate this client:

  Install the Agent network OnPlus on the premises of the customer and connect it to the LAN client.

  Turn the Network Agent OnPlus the switch zipper on the back panel of the Network Agent OnPlus.

  If your computer is connected to the same network as the network OnPlus Agent, click on the button activate now below.

  Otherwise, follow the instructions for activation in the guide getting started for the Cisco OnPlus Network Agent.

  Activation for this customer information are:

  Activation ID:... »

  If I click on activate it says

  "Unable to determine a local IP address for all Agent OnPlus of network into your current network.

  Check that the Network Agent OnPlus is connected to the same local network as this browser. OnPlus Network Agent must be on the same public WAN IP address (203.25.x.x) in your web browser block current.

  Not enabled OnPlus network Agents will attempt to disseminate their IP up to 30 minutes and if successful will appear here for 4 hours. Try to stop power OnPlus Network Agent if it has been online for more than 30 minutes.

  Verify that the DHCP service is running on the local network so that network OnPlus Agent is able to acquire an IP via DHCP. You will be able to change Agent of the OnPlus network to use a static IP address if you choose to (recommended), but the DHCP service is required to access the Network Agent OnPlus start.

  Ensure that DHCP clients can route to the Internet.

  If the Network Agent OnPlus hosting site has multiple WAN paths to the Internet, try refreshing this page. Your browser must Access this page from the IP WAN as the Agent of OnPlus network address. »

  We even tried power cycling it, and I'm definitely on the same subnet.

  There was no possibility of entering an IP address no matter where manually - process regarding the "Impossible to determine an IP address local for all Agent OnPlus network on your current network."

  I ping the device and even connect to its graphical interface. It simply does not appear as any way to add this unit to my own account on the portal OnPlus.

  That please?

  Hello Brett.

  The On100 device can be associated with a single customer and a customer cannot exist in more than one Agent account. From your description, I understand that your colleague registered as a OnPlus Agent, created an account customer, and then active the On100 device under this new client.

  However, it is possible for you to have access to the customer site by becoming a sub-agent under account OnPlus Agent of your colleague.  And according to the description above, it seems that your colleague has already sent you an invitation to become a subagent.  The problem now is that you have previously registered your EAC as OnPlus Agent id.  It is not possible for a single CCE id or an Agent and a secondary agent in the OnPlus portal.

  To allow your registration as sub-agent, we remove your EAC to your portal id.  It is a manual step that I am happy to help you.  Simply unicast your Agent account information to [email protected] / * / .  Once I take off your CEC id you will be OK to complete the registration of subagent.

  Here's some more information about the creation of the sub-agents in the portal OnPlus.  A previous post jamwyatt courtesy of response:

  In the account that contains the Agent network ON100, you can add other agents, on invitation. On the overview page, there is a menu agent at the top that will allow you to invite the officers. Once you invite an agent, and they sign up, they will be able to see the same view you see. The design intent is that you set up a master account for your business, then you invite other employees and contractors to adhere as agents of this account. Each guest will need a Cisco ID and once that they sign up, they will have to be approved by the owner of the main account (same menu agent, selection "of Agents in waiting"). Using this approach, the owner of the company retains the main account and allows you to manage completely all agents.

  Kind regards

  -r.

• Cannot add a device Cisco IOS - development issue?

  I try to add a router IOS (as a platform) my Hyperic (3.2.1) resources and I kept getting this error (see the following stack trace).
  
  =============================================================
  java.lang.NullPointerException at
  org.hyperic.hq.ui.action.resource.platform.inventory.NewPlatformAction.execute(NewPlatformAction.java:108) to
  org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) to
  org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) to
  org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) to
  org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:717) to
  javax.servlet.http.HttpServlet.service(HttpServlet.java:810) to
  org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) to
  org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
  ....
  
  =============================================================
  
  So, I downloaded the src and it built with the following parameters of the construction.
  Windows Server 2003 SP2 (Standard edition)
  Java 1.5 update 15, Ant 1.7.0 JBoss 4.0.3SP1, PostgreSQL
  
  However, I still get the same error. After adding a few log statements, I realized that in NewPlatformAction.java ("run" method), the value of the agent is zero [agent is created by calling BizAppUtils.getAgentConnection (...)] which causes the NullPointerException in the above stack trace [boss.createPlatform (...,...,..., agent.getId ())].
  
  BizAppUtils.getAgentConnection () is essentially a block of code to check if the "IP Port string' is null or not and this string always seems to be the null value. I put some instructions to log in NewPlatformAction.java and BizAppUtils.java and have cut-and - paste a few lines of the log server below.
  
  Basically, BizAppUtils jump the complete code block that is supposed to create an Agent.
  
  ==============================================================
  
  2008-03-13 12:23:32, 537 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] find the type of platform [10004]
  2008-03-13 12:23:32, 537 [http - 0.0.0.0-7080-2] INFO [NewPlatformAction] platform [Cisco 1720] was created with attributes add ImageButtonBean = [null, null] cancel = ImageButtonBean [null, null] create = ImageButtonBean [null, null] Delete = ImageButtonBean [null, null] ok = ImageButtonBean [38: 10] Delete = ImageButtonBean [null, null] reset = enable ImageButtonBean [null, null] = ImageButtonBean [null, null] userset = ImageButtonBean [null, null] pageSize = null startMonth = 2 startDay = 2 startYear = 1 startHour = 12 startMin = 23 startAmPm = pm endMonth = 0 endDay = 1 endYear = 2008 endHour = 12 endMin = 23 endAmPm = null startTime = now recurInterval = recurrenceFrequencyDaily = numDays daily = 1 NumSemaines = 1 recurrenceDay=[Ljava.lang.Integer;@121e1bb recurrenceFrequencyMonthly = onEach numMonths = 1 recurrenceWeek = null monthlyRecurrenceDay = null eachDay 1 endTime = none = RID = null type = null name = Cisco 1720 location = lab description = router Cisco 1720 cpuCount = null fqdn = cisco1720.inside.eclyptic.com FPS = [{address = 10.100.1.13 netmask = mACAddress = id = 0 mTime = null cTime = null}] numIps = 1
  2008-03-13 12:23:32, 553 forms of INFO [NewPlatformAction] [http - 0.0.0.0 - 7080-2] string value for the ip port is: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils] Agent ip port string: null...
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [BizappUtils], returning null
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] after the creation of agent
  2008-03-13 12:23:32, 553 [http - 0.0.0.0 - 7080-2] INFO [NewPlatformAction] check for agent == null is true
  
  ==============================================================
  
  I have attached a screenshot ' create new platform "UI of Hyperic and my modified source files.
  
  I would really like to know if I'm doing something wrong or is this a valid bug in Hyperic?
  
  I just want to add this IOS device to Hyperic to familiarize myself with how Hyperic manages network devices. My long-term goal is to add network devices in Hyperic via an API - so pointers (or the samples/docs) to an API which allows to add devices to Hyperic is also really useful.

  Hi Michelle,

  I was able to reproduce using a fresh installation with no agent installed.  At least one officer has, on the same machine that the HQ server is fine.  We should apply rather than just displaying this message:
  "There is no agent available to treat this platform."

  Can you install + import agent and try again?

• Cannot add Raw Device Mapping as hard drive

  Hello

  We have 2 Server 2008 Virtual Machines (which are clustered) that make up a Cluster 2 node x.  The ESX servers that organize these VMs (ESX Server different on each) are connected to a San.  When I place these two VMs, I could add a hard drive "Raw Device Mapping" without problem - he could see data warehouses, I had Setup on the SAN.  However when I try to add a hard drive "Raw Device Mapping" on the 2 new virtual machines, the only options I have are:

  -Create a new virtual disk

  -Use an existing virtual disk

  Any ideas why Raw Device Mappings is greyed out?

  You add the second node RDM disk by selecting "use an existing virtual disk".  The ability to add RAW devices is only available for RAW LUN which has already been mapped to a virtual machine.

  When you add the ROW to the first node, a mapping for the RDM vmdk file was created. It's that developed from the second node.

  See http://kb.vmware.com/kb/1004617 for more details.

  André

• Get the "Failed to connect to server" error after having my hosting of emails expire and reconnected. Using the latest version of Thunderbird.

  Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
  My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
  When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
  I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.

  Plaaaaiiss... Halllp!

  Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.

  Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result

  Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.

• Officejet OfficeJet 4620: 4620 - cannot add a device on the Chromebook

  When you install this printer, I have printed out all the test sheets provides the printer and everything is a 'pass' and connected. I try to print from my HP Chromebook but can't add a device. The application code, I got the printer indicates it is expired. I'm stuck. Suggestions?

  Hello

  Please download the HP print for chrome extension and follow the Installer instructions here to see if that helps.

• 500 internal Server Error - cannot run a custom page of JDEV 10.1.3...

  Hello
  
  I'm trying to run a custom of my JDEV page. But I get the following error.
  
  *****************************************************************************************
  
  * 500 internal server error *.
  
  oracle.apps.fnd.cache.CacheException
  at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
  ......
  .....
  Caused by: oracle.apps.jtf.base.resources.FrameworkException:
  An exception occurred in the CacheAccess.getnullThe base exception method is:
  Unable to create new database connection: FNDSECURITY_APPL_SERVER_ID
  at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
  ... more than 54
  *****************************************************************************************
  
  I checked the DBC file. The APPS_JDBC_URL was containing "\". I tried to delete but it force worked. I checked if I use the correct version of the patch JDEV, no problem with that too.
  
  Kindly let me know the solution.
  
  Thank you.
  
  Published by: user605470 on May 23, 2009 17:39

  The error means bad DBC file. Take the latest version of $FND_SECURE. Then try to run the JDEv page.

  Thank you
  Kumar