Connected mode

Similar Questions

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• The "USB connection Mode" option is missing!

  I can't change the USB connection mode: after plugging in the USB cable to the PC in the 'Settings' icon screen House. > connection device > USB connectivity > here I am showed only three options:

  1 install the software

  2-device USB detect and

  3 - Dieberson for connecction with a USB device.

  Can someone help me please find the possibility to choose between (MSC) and the mode of connecting USB (MTP)?

  All mobile phones only has this option but not my Z5C. Help, please.

  Hi Prodave,

  Please see the following Thread.

  http://talk.sonymobile.com/T5/Xperia-E4/MSC-or-USB-mass-storage-mode-without-root/m-p/1070290#M1291

• No settings to change USB connection mode

  I just bought a m4.
  Now, I tried to change the USB connection met.
  But he's not here.
  The only thing I can do is to install the software for the pc, but that's all.
  Does anyone else have this problem?
  Or did someone knows how to solve this problem.
  The phone is up to date with android and the build version.

  Hi @Koningdefuijk,

  Are you referring to change Connect USB to MSC mode? If so this feature is not available in the Xperia M4 Aqua. PSG is the only available USB connection mode, so there is no setting to change this.

• BlackBerry Dev Alpha insists the point on the Bluetooth connection mode.

  Hello.

  I tried several times updated BlackBerry Dev Alpha to the new firmware with the instructions on the website to update. Make sure that all the steps I did. I have tried but no luck. Desktop software did not update. I tried the troubleshooting, but I couldn't find any chance to try several times and it get messages that he has made available.

  I clicked on update and repair. When you click Repair, no fading, rather office continue to find the update software and finally sometimes found. When it concluded, Office Automation application password for the bluetooth connection (I'm sure bluetooth was disabled on device and my laptop) and it continued just as the device was only pretending to be connected with bluetooth. Then it starts to download. But even once, it never ends.

  I already have:

  > Remove the registry as indicated

  > set the USB for windows

  > enable development mode

  > set file sharing on

  > run the troubleshooting steps.

  No luck, I found . Everyone knows the same symptom?

  Yes of course. My Dev Alpha is updated at the moment. Even though she insisted update on Bluetooth connection mode, when install just re - check again if the connection is available and I just reconnect the device to continue the installation.

• How to plan the failover for the following scenarios in Flex-connect mode.

  The following queries are against the AP high availability (no SSO failover or controller HA), which means that if a controller fails, the AP will be failover to the secondary controller that is in a different location than Geo. the AP will be to connect Flex with local switching and local authorization mode: in this scenario, here are my questions

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  2:do, we need to subnet masks to match both ends?

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Any help given would be really appreciated.

  Thank you.

  1: if I have a SSID that has a set of interfaces that are connected to him, can I switch it on the other controller where there may be a single WLAN connected. ?

  The groups interface works only for centrally switch not locally

  2:do, we need to subnet masks to match both ends?

  See #1

  3: if I have a SSID with open authentication, can I configure the SSID of the remote network without authentication?

  If you configure an SSID with open authentication, then the all having APs SSID assigned to it will use.  Open authentication is identical to no authentication.

  4: can someone link me to the top with a document that explains the configuration of the case study of the flex-connect mode fail on scenarios.

  Do a search on Google for 'FlexConnect deployment guide It will have links to failover.

  -Scott

• Smartphones blackBerry how to change the connection mode for a BlackBerry Internet Service account on my 9700

  Got my first BB is the 9700 and I believe that my company doesn't have not BES, I must connect on my BIS via a computer to set up my work email (Microsoft Exchange Server). After having read about it and try, I get an error message on the Web site of my provider which basically means that I need to change the connection mode for a BlackBerry Internet Service account. I checked the site Web of Blackberry and the instructions do not work for my 9700. Can someone help me please?

  Thank you very much

  Buskroth

  the link provided should have addressed your question, if you "can't get there from here" - I would suggest that you contact your carrier because they need to move your account password enabled allowing connect you via a non - BB browser to set up your BIS email setting...

• Stay connected mode 'sleep'

  is there an option to stay connected to the wifi mode 'sleep'?

  Not in OS X. You can search for a third-party utility to help you, but I don't remember any. A WiFi sleeps in order to preserve the battery life because the WiFi consumes a lot of battery if left running when not used.

• 9871 on two wires connect mode

  Hello

  Currently, I am using mode of 9871 on two sons.

  I've compiled a small FPGA bitfile who just periodically writes a character on Port 1 of my module.

  the port is configured as follows: 9600 bps, two sons car, no parity 1 stop bit.

  To receive this tank, I use a RS485 = RS232 converter that works very well with some instruments working on rs485. This converter has two entrances of line: + and -.

  My question is, who is the 9871 lines to connect to this PIN when it is configured in two modes of wire?

  I have found no KB on this!

  I guess it's the + RX and RX-lines, but I'm not sure.

  someone can it tell me?

  Best regards

  Hello

  You need to connect the TX + RX + and TX - RX -.

  Maybe this could help:

  http://decibel.NI.com/content/docs/doc-4169

  Kind regards

• Cisco E3000 connect Mode cascade

  I have a Linksys E3000 mode cascade with my Modem - Router ADSL. However, even if I can connect using the IP address of the router, I am unable to connect using Cisco connect just in case I want to allow anyone to use the comments feature.

  Can someone tell me how I can connect using Cisco Connect or how to activate the functionality of the web page comments?

  Thank you

  Ocandid

  Yes it will work. If you are still experiencing a problem, you can refer to this link and it will help you in this cascade two routers to each other...

• Get information from vCenters bound in a connected mode configuration

  I use get - vm against the vCenter that I am connected.  However this vCenter is tied with a few other vCenters mode.

  How can I use

  Get - vm

  so that it returns all virtual machines of vcenters in bound with that mode I am currently connected to?

  Thank you!

  The easiest way would be to use the AllLinked of the cmdlet Connect-VIServer switch.

  This requires to operate in "multiple".

• Kiosk with automatic Windows XP (other user) connection mode

  Greetings,

  I'm having some trouble getting kiosk mode to work with automatic sign next to windows xp.

  Kiosk mode works if I disable autologon (http://support.microsoft.com/kb/315231), but when it enabled it gives an error saying that all desktop computers are in use.

  The strange thing is that when I enable autologon and I manually log on with another user the username that is customized to the kioskmode can I disconnect and reconnect on the desktop, all I want. But at the point where I have activate automatic login with another user that the custom user name he gives all desktop computers are currently in use error.

  Does anyone know if the Kiosk mode with automatic logon to another user than the user username custom work?

  Thanks in advance,

  Bram

  Might work if you turn off automatic logon, and then use the view GPO to disable the SSO, then allow the user to connect with the name of user and password you want.

• Can not see a virtual machine server connection mode

  Hello

  I'm testing VMWare View and I have a problem. I installed the ESX, vCenter and the view connection server. I have installed a virtual Windows XP machine and installed VMWare Tools + Agent and can not see this virtual machine when I want to create a "individual desktop" under "Desktop and pools. The connection to the vCenter works very well.

  Any ideas?

  Concerning

  Are the other machines available when you try to add an invidiaul machine?  I was wondering if you virtual center connectivity is working properly.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• I am administrator on my computer, I forgot my password. I can not connect mode even without request even password (duh) I tried everything to remember. I can't. Please HELP: o

  I use windows XP

  Hello

  If you have another account administrative privileges in your system, then login and go to the command prompt

  At the command prompt, type "net user administrator *" without the quotes and press ENTER. It asks for a new password entered in and confirm the same.

  Sign in to the account administrator with this password.

  If this fails, you can try buying some records available online password reset.

  Saurabh yapi | E-mail address is removed from the privacy *.

• Wireless connection lost in mode 'sleep'

  I noticed recently that my Electrify will lose its data and connection Wifi when it is in "standby" quite a long time. I sleep forever set policy and it will show again only 4 bars of cell tower and that's all. After he wake up from his sleep and giving it some time, it will reconnect either 3g or wireless. What I have set wrong it will not keep a connection mode 'sleep'?

  Try the sleep at night...