Portege M200, earpiece/headset Bluetooth

Similar Questions

• BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

  I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

• Numbering with earpiece/headset bluetooth problem

  I have a headset bluetooth jawbone and whenever my phone is locked (with fingerprints fingerprint and password), I can't make calls or even deal with it. The only way I can do anything, that's if I unlock my phone. When there is an incoming call, I can use the headset to answer, but other than that, nothing only works when the phone is locked.

  Y at - it an option that I have to toggle or is this just a problem with the phone itself?

  @zerotrunks,

  I'm having the same problem. Bike is addressing this issue. If all goes well it will be addressed in a future update.

• BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

  During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

  During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

  Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

  Is there a way to set the default device for different outputs.

  for example

  Use the mini as the audio device output by default when the music plays.

  When I get a call, use the headset as default device bluetooth for phone calls.

  When I hang up, swinging back to the mini taken (because it is the default device for audio)

  In addition,

  I ordered the bridge thinking music that he could solve my problem.

  Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

  Should be able to assign the bluetooth services specific to the results of the default value.

  for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

  Calls > bluetooth headset.

  Hope that makes sense.

  Dave

  The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

  The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

  I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

  Read this new thread to see the solution to this new problem, if it still exists.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

• earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

  After you have installed windows 8 in my laptop, I've just matched with my nokia BH-503. But after cutting the first time, I don't then reconnect with my laptop. My windows is already updated, but still, I am facing this problem. Even now when I try to add my audio device my laptop can not find this. But I can easily connect this audio device with my laptop and windows 7. So eventually, I'm sure that WINDOWS 8 I have this problem. I already searched a lot information of websites & questions, answers, but still this problem have no solution.  Its very sad news for users of windows 8. :(

  Headphones Audio/stereo/headset BLUETOOTH Connection with WINDOWS 8

  
  
  
  
  Hi! It's Pranzell. Guys, it's like a very simple. Here, follow my steps :
  
  
  1. Switch Off your bluetooth device. Any device, just turn it off.
  2. now the charms blow bar and open settings ->  change the settings of PC-> devices.
  3. keep it button / STOP for 8 seconds or more until a BLUE led flashes and Flash.
  4. your device came into PAIRING MODE, quickly, click "Search devices" in your computer.
   
  5. remember the blue led of your device blinks just 3 minutes (Nokia/hTC/Blackberry/Jabra/Phillips) search and pair your device in this time only.
  6 install/update the drivers manually if necessary. W8 is usually installed in everthing.
  7. the pairs! You will receive a notification, "added stereo Audio Gateway".
  8 open the Panel of control-> hardware and sound-> sound-> the Read tab.
  9. right click on the new added device and assign as the default value. 
  10 say thank you!  :)

• ZBook 15 G2: Earpiece/headset Bluetooth does not connect

  I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

  Can I pair the headset, and it appears in the printers and devices window.

  However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

  If I look in the services:

  Bluetooth support Service: not started, automatic

  Bluetooth OBEX service: not started, automatic

  : Supported Bluetooth started, manual repair

  If I try to start Bluetooth Media Service, I get an error 1053.

  I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
  June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

  Any suggestions where to look next would be appreciated.

  stringy76,

  I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

  https://communities.Intel.com/thread/104851

  If you follow these steps, you should be able to reinstall these updates and your headphones working again.

• Error "adding the unit failed, resulting in an unknown error." 0x80004005"when you add earpiece/headset Bluetooth

  I'm having a problem new pairing my Bluetooth headset with my laptop.  I am running Windows 7 Enterprise 64.  I repeated this behavior with 2 different helmets.  Here's the problem:

  1. I pair the headset with my laptop and everything works fine
  2. I go to Bluetooth devices and remove the device from headphones
  3. I try then to pair the headset to the laptop and the error message

  I was not able to find anything online to help.  I spoke with the manufacturer (Plantronics) and they were also able to help.  Surely, there has got to be a way so he could pair up again.  I am desperate for help.  I really want to rebuild my machine just to get the headset to be paired again.

  Thanks in advance for assistance.

  Hi guys,.

  I could not pair either of my two headphones to my Windows 7 computer.  Here's what fixed it for me.  In devices, Radios, Bluetooth Manager, I opened the properties for my radio (2046 Broadcom Bluetooth 2.1 + EDR USB Device with First Connect).  On the Advanced tab, I took the dash on my radio name.  The headphones paired immediately after that.

  This is a pretty serious bug because the radio takes its name from the computer name, which is the name of user-PC by default when you install Windows 7.

  I hope this fixes your problems.

  Note that to actually use the headset, you will probably need to update your Bluetooth drivers if you haven't done so already.  Go to http://www.broadcom.com/support/bluetooth/update.php

• Create a shortcut on the desktop for earpiece/headset bluetooth

  Shortcuts on Desktop__

  How can I create a shortcut on the desktop for operations settings and bluetooth headset?  I have created one for the helmet device, but I still have to go into that connect.

  Hi Lee1948,

  How did you create the shortcut?

  You can see the following article on how to create the shortcut and try the steps and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows7/create-or-delete-a-shortcut

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect the earpiece/headset Bluetooth

  Original title: Bluetooth device

  Hello

  I use a computer windows 7 dell laptop and having succumbed to my last 10 attempts to connect my sony with her bluetooth headset. Also, I went through all the links of responses provided by the site. I also downloaded the software device for her drive. The laptop also shows my SonyBTH under "Devices and Printers". But I'm still not able to connect my SonyBTH even after clicking on the indicated device.

  Please kindly help me with this problem.

  Anyone?

  Thank you

  Afonso Rajalim

  Hi Afonso,

  Thanks for posting your query in Microsoft Community.

  I understand that you are unable to connect SonyBTH to the Windows 7 machine and I appreciate the efforts made in the patches that you tried. Let me ask you;

  • Have you been able to connect to the same SonyBTH in the past?
  • Remember to no particular change in the computer before the show?
  • What security software is installed on the computer?
  • What is the model number of your Dell computer?

  There could be several reasons for this cause and diagnose the problem, we will try these steps and check.

  Step 1: Make sure that Windows is configured to accept incoming Bluetooth connections.

  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  Step 2: Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  Solving problems with Bluetooth devices compatible (applicable to Windows 7 as well)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Not able to connect the earpiece/headset Bluetooth for Wndows 7 Enterprise (64-bit)

  I tried to connect a new Bluetooth headset to my laptop Lenovo T420.

  The laptop runs on Windows 7 Enterprise SP1 (64 bit OS).

  The laptop has built-in Bluetooth adapter and I turned on.

  Also, I went ON my helmet and guarded in discovery mode.

  After that, I added the helmet using the button 'Add a device' from the control panel-> devices and printers.

  Windows 7 installed the drivers required and the headset is successfully added.

  Now, I tried to connect to the headset using Bluetooth configuration dialog window.

  I did a right click on the icon of headset to Panel-> devices and printers.

  The right click is not display the option 'control' for the headphones.

  He showed that other options - "Create a shortcut", "Troubleshooting", "Remove the instrument", "Properties".

  So, I won't be able to connect my Bluetooth headset.

  I tried the same helmet on my friend's laptop computer.

  His laptop is running on Windows 7 Home Edition (32 bit OS).

  The connected properly Bluetooth headset and the option 'control' is also available on the right click.

  The 'control' option provided the Bluetooth configuration dialog window where I can use the "connect" button to connect the headset.

  Kindly let me know the resolution of the issue.

  If your computer has built-in Bluetooth features, you can enable or disable the functions by pressing on Fn + F5. If you press Fn + F5, a list of the wireless features is displayed in the window Radio wireless.

  You can enable or disable the Bluetooth features with a single click.

  To use the Bluetooth features, double-click the icon of Bluetooth Favorites on the desktop and follow the instructions on the screen.

  You can use the Wireless Radio switch to disable Bluetooth features. The wireless radio switch is usually located on the front of the machine. If you have trouble with the Bluetooth, make sure that the wireless Radio switch is set to position it.

  Source: http://support.lenovo.com/us/en/documents/ht037001

  What is the number and the model of the Bluetooth headset? Enter the number of brand and model of your Bluetooth device in the search field provided in the link below, to see if there are compatibility problems reported.

  Windows Compatibility Center.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=windows%207&Type=Both&CurrentPage=1&TotalPages=133&ShowCriteria=0&Compatibility=Unknown&ProductName=windows%207

• Number of any his earpiece/headset Bluetooth

  Original title: Bluetooth device does not work

  I can't with a new bluetooth headset and an adapter for my computer I bought. I use Windows 7 Professional 64 - bit with a BTD Kinivo - 400 bluetooth adapter. My computer recognizes the card and you can connect to my helmet, but I can't not all sounds to play on the headphones and I can not activate the helmet via Control Panel > sounds. Is there a way can I fix?

  

  

  Hello Joshua,.

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  Looks like Windows Installer crashes when installing the driver for the Bluetooth audio device and drivers does not proceed with the installation correctly.

  See the suggestions by Microsoft community animator and author of Wiki Andre Da Costa, on June 10, 2011 to unsubscribe and reregister Windows Installer and check the installation of the driver.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Installer-Windows-Setup-has-stopped/15e20146-4E4A-488b-A226-c9bfb60f836b

  I hope this helps. Please let us know the results.

• Connected to earpiece/Headset Bluetooth earpiece

  Hello, is it possible to listen to the event when a bluetooth headset is connected?  The headset uses the hands-free profile.

  I tried the BluetoothSerialPort which does not pick up the helmet because it does not support the serial port profile.  I watched the javax. Package of Bluetooth but it doesn't seem to be a listener to connect bluetooth devices, unless I missed something.  I searched through the forum and could not find a solution.

  Any suggestion would be appreciated,

  Thank you

  Follow-up:

  I realized that if I put the audio track of a Bluetooth (AudioPathControl.AUDIO_PATH_BLUETOOTH) player and it returns a MediaException, it means that no bluetooth headset is connected, who works for what I need.

• Voice of selected from earpiece/headset bluetooth blackBerry Smartphones

  Hello

  have a 8310 and a Motorola H700 bluetooth headset.  Voice dialing from the headset worked fine when I first set up, now I get a single short low tone when I press the call button on the headset and it does not "say a command" no more.  Orders voice work very well through the headset if launched from the phone.  I have re-couple to the headset (several times).  I tried my helmet on my wife's phone, and he began composing voice as it should.  I tried his H700 to my phone and it has the same symptoms.

  Any ideas?

  Nick

  Problem solved.  I out the battery for a few minutes and the phone then restarted when I put back it. Now it works perfectly, as before.

• Smartphones blackBerry sync a Blackberry Pearl 8100 to a Sony Ericsson earpiece/Headset Bluetooth wireless

  Via Bluetooth, I synced my Blackberry 8100 Pearl for my Sony Ericson Bloothtooth Headset HBH-DS200 stereo.  The devices are connected, but when I play music from the phone, music comes out of the Blackberry speaker rather than the helmet of the Sony Ericsson headset Sony Ericson is A2DP compatible.  Does anyone know if the Pearl 8100 is compatible A2DP and yes there at - it an option to disable this active or disabled on the phone?

  I see in the instructions for Blackberry on the 8100 that the "Source Audio" profile is A2DP but how do to this profile source?  From Sony Ericsson's Web site says the Blackbery 8300 is compatible with the headset, but did not mention the Pearl 8100. Thank you.  Miles

  The 8100 is only compatible A2DP if you improve its OS to OS 4.5.  Look into the Options > on.  If it says 4.2.x.x, then you need to upgrade.

  Here is a link that should help you:

  http://www.BlackBerryForums.com/General-8100-Series-discussion-Pearl/149548-latest-OS-8100-4-50-92-4...

• Smartphones from blackBerry Bold 9900 - can't see any earpiece/headset bluetooth

  Hello

  I'm having a problem with my new "BOLD".

  I can not pair it with a bluetooth headset, specifically, is not detect any bluetooth headset (I tried with 3 different models).

  I don't know that Bluetooth works because I can connect the device to my PC.

  I've tried everything, I put in pairing mode so headphones listening and the device but still nothing.

  I tried 'listen' mode and 'search' mode and yet nothing works.

  someone has an idea of what it could be? At this point, I think of a hardware problem, could it be?

  This may seem a minor issue for someone, but I'm often driving while talking on the phone, cannot do without this option.

  Help would be appreciated!

  Thank you guys!

  Problem solved.

  go to the bluetooth options and remove the flag of encryption and transfer address book.

  in this way, it worked for me and could see the devices.

  Also, make sure that you are using with your bluetooth pairing headset.