Connected wireless but no access to the network

Similar Questions

• Best way to extend the network of Apple using Cat5 and wireless, but with access to the same network

  Appreciate any help here.

  I need to extend my network coverage for the part out of my house where the current signal does not cover.

  I have a Time capsule in the office connected to my Modem and then created a wireless (XXXX) network that connects to the extreme in my front room... .well when I'm in my room before the signal does not increase when I go near the extreme... and maybe it's that I'm still picking up XXX to my Time Capsule wireless network.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5 and therefore the extreme would be able to stream my network wireless XXXX?

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which currently gets no signal... then do cela via Cat5 to the EXTREME at the 3rd device... or must it come directly from the TC?   (and again... the 3rd device will also be able to broadcast the network XXXX?

  Ideally, I want the network to be possible STB and flavours around the House, and I think that the connections between Ethernet devices would accomplish that... but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX wifi network I have printers, VPN, etc all together towards the top on.

  Oh... and 1 other point, I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... is - it possible... and that has to be directly connected to the time Capsule and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Hope that makes sense... but please let me know if you need more details.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5

  Yes. Hate to be picky here, but I hope you'll use CAT5, CAT5e cabling being quite a bit obsolete.

  wireless network and if so the extreme would be able to stream my XXXX?

  Yes

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which gets currently no signal... then do cela via Cat5 to the EXTREME at the 3rd device

  Yes, but it would be preferable to cables to connect the 3rd to the main TC, if that's an option.

  or does have to come directly from the TC?

  No, but it would be better if she could, if this is an option.

  and once again... the 3rd device will also be able to broadcast the network XXXX?

  Yes

  and I think that the connections between Ethernet devices would achieve this

  That is right. Ethernet is always the best choice in terms of performance.

  but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX same wifi network I printer, VPN, etc all together towards the top on.

  That should work well.  However, you may not aware that most of the PC and iOS devices not 'automatically' between different wireless access points as they move from one place to the other.  For example, you have your iPhone near the time Capsule, so he'll be looking for a strong signal from the time Capsule. If you move the close AirPort Extreme iPhone or any other device 3rd... the iPhone usually will stay connected to wireless Time Capsule... even if a stronger signal may be available in another wireless access point. Nature of the beast with IOS devices.

  Thus, with most of the PC and iOS devices, you will have to get used to temporarily turn off the WiFi on the iOS device when you move from one place to the other, then re - turn on WiFi once the device is close to the other wireless access point. The iOS device then generally will pick up the strongest signal from the nearest access point.

  Portable Mac computers will generally do a good job of automatically 'switching' to pick up the best signal of different access points in you walking the laptop around the House.

  I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... It is possible.

  Yes, but the Time Capsule and AirPort Extreme Gigabit Ethernet ports or 10/100/1000, then the switch is going to limit the maximum speed on the network at 100 Mbps when the devices are capable of much higher speed.  If you plan to invest in the installation of Ethernet wiring around the House, then you also want to invent a new Gigatibit Ethernet 10/100/1000 switch, because it will allow up to 10 times faster compared to a 10/100 switch network connections.

  can do this via Cat5 to the EXTREME at the 3rd device... or need to come directly from the TC?

  Yes, but it would be best to connect the switch to the time Capsule if it is an option.

  and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Yes

• Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

  I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

  Thank you

  interface Ethernet0/0

  Speed 100

  full duplex

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.240

  !

  interface Ethernet0/1

  Speed 100

  full duplex

  nameif inside

  security-level 100

  IP 10.88.10.254 255.255.255.0

  !

  interface Management0/0

  Shutdown

  nameif management

  security-level 0

  no ip address

  !

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PAT_to_Outside_ClassA object

  10.88.0.0 subnet 255.255.0.0

  network of the PAT_to_Outside_ClassB object

  subnet 172.16.0.0 255.240.0.0

  network of the PAT_to_Outside_ClassC object

  Subnet 192.168.0.0 255.255.240.0

  network of the LocalNetwork object

  10.88.0.0 subnet 255.255.0.0

  network of the RemoteNetwork1 object

  Subnet 192.168.0.0 255.255.0.0

  network of the RemoteNetwork2 object

  172.16.10.0 subnet 255.255.255.0

  network of the RemoteNetwork3 object

  10.86.0.0 subnet 255.255.0.0

  network of the RemoteNetwork4 object

  10.250.1.0 subnet 255.255.255.0

  network of the NatExempt object

  10.88.10.0 subnet 255.255.255.0

  the Site_to_SiteVPN1 object-group network

  object-network 192.168.4.0 255.255.254.0

  object-network 172.16.10.0 255.255.255.0

  object-network 10.0.0.0 255.0.0.0

  outside_access_in deny ip extended access list a whole

  inside_access_in of access allowed any ip an extended list

  11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

  outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

  mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

  NAT static NatExempt NatExempt of the source (indoor, outdoor)

  NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

  NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

  NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

  !

  network of the PAT_to_Outside_ClassA object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassB object

  NAT dynamic interface (indoor, outdoor)

  network of the PAT_to_Outside_ClassC object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  dynamic-access-policy-registration DfltAccessPolicy

  Sysopt connection timewait

  Service resetoutside

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto-map dynamic dynmap 10 set pfs

  Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

  life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

  Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

  Crypto-map dynamic dynmap 10 the value reverse-road

  card crypto mymap 1 match address outside_1_cryptomap

  card crypto mymap 1 set counterpart x.x.x.x

  card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

  card crypto mymap 86400 seconds, 1 lifetime of security association set

  map mymap 1 set security-association life crypto kilobytes 4608000

  map mymap 100-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  crypto isakmp identity address

  Crypto isakmp nat-traversal 30

  Crypto ikev1 allow outside

  IKEv1 crypto ipsec-over-tcp port 10000

  IKEv1 crypto policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 50

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  preshared authentication

  aes-256 encryption

  sha hash

  Group 1

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal BACKDOORVPN group policy

  BACKDOORVPN group policy attributes

  value of VPN-filter 11

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelall

  BH.UK value by default-field

  type tunnel-group BACKDOORVPN remote access

  attributes global-tunnel-group BACKDOORVPN

  address pool Admin_Pool

  Group Policy - by default-BACKDOORVPN

  IPSec-attributes tunnel-group BACKDOORVPN

  IKEv1 pre-shared-key *.

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  Excellent.

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• XP computer. Connect wireless but cannot continue to the internet. Message from State windows is not currently managing your wireless network.

  How can I change my connections by which windows manages my wireless network.

  Hello

  You must ensure that the sellers utility nWireless does not load upward at satrtup.

  Then, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• HP3070 analysis via the USB port, but don't scan the network, printing is ok? Used to work, but no more

  MyHP3070 deskjet will scan and print via USB link, but don't scan the network, printing is authorized via netowrk. Used to work but not anymor. I have windows XP laptop. I tried HP doctor but in vain. It says that it cannot connect with the driver. Tried to uninstall and reinstall from the CD and also downloaded driver via HP web page but does not. Any ideas what to try next? Also have Norton 360 software virsus and tried extinction of firewalls, etc., but it doesn't seem to help. What is confusing, is that it is used to work but now is intermittened, it won't work at all.

  I managed to uninstall with REVO Uninstaller. This removed the driver original from the Add/REMOVE program possibly a result.  This then allowed me to install the driver that you recommended to your link above. I ran out of time yesterday to test if the printer has worked with the new download, so I'll have to try again later today to see if it works. I would grab with result.

  Thanks a mil

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• vSwitch ESXi 5.1 workaround to virtual machines (direct access to the network)

  Hello world!

  I have a server running properly the 5.1 ESXi hypervisor and got inside the physical grid active router with DHCP. How can I configure the vSwitch on ESXi 5.1 work not managed on the network, without VLAN and have direct access to the network?

  Just to clarify, I would like to first of all virtual machines VMware Workstation works - if it is possible to run several virtual machines and define all NICS (Network Interface Card) as connected by a bridge, that is to say. Each VM gets the specific configurations of IP to the external router.

  Since now, thank you very much for the help!

  Best regards

  Eduardo

  With ESXi the vSwitches work comparable to Bridged networking, so there is really nothing special to do.

  André