CONNECTION ERROR USB VN7 - 592G - 74H 8 FOR SETUP WIN10

Similar Questions

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• Database connection - error of creation of the admin user Setup. No route to host

  During step 2: configuration of the database connection we select the "internal database".
  After a short delay, we get a message saying "error of creation of the admin user. No route to the host.
  I have been more before DNS records and back and everything seems in good condition.
  Can someone point me in the right direction to solve this error?
  

  This is an SSL certificate error. Have you changed the default self-signed SSL certificates?

• Fatal OR connect error 12170.

  I have Oracle DB ON Linux Suse 11.2: in my alert log, I can see:
  
  Fatal OR connect error 12170.
  
  VERSION INFORMATION:
  AMT for Linux: Version 11.2.0.2.0 - Production
  Oracle leaves NT Protocol adapter for Linux: Version 11.2.0.2.0 - Production
  Protocol TCP/IP NT to Linux adapter: 11.2.0.2.0 - Production Version
  Time: August 21, 2012 11:19:28
  Tracing not lit.
  AMT error struct:
  NS main err in code: 12535
  
  TNS-12535: TNS:operation expired
  NS secondary err code: 12606
  NT main err in code: 0
  NT secondary err code: 0
  NT OS err code: 0
  Customer's address: (ADDRESS = (PROTOCOL = tcp (PORT = 61658))(HOST=11.125.190.132))
  WARNING: inbound connections has expired (ORA-3136)

  Handle: user8039531
  Status level: Beginner
  Join date: May 23, 2012
  Messages total: 76
  Total Questions: 19 (18 pending)

  Why waste you your time here when you rarely get answer to your questions?

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

  Hello

  Since you said it worked very well recently, I'll try to do a system restore at this point in time.

  See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

  In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

• hp7510 connected by USB for Win 7, "printer failure, 0xc19a0028.» "Stop, then press.

  When I turn the hp7510 installed yesterday, connected by USB for Win 7, I get "printer failure, 0xc19a0028.» "Stop, then press. Same error 6 times. How to fix?

  I turned on the printer, ignored the advice of "The printer failed" message to turn off, then on again. Then, with the sill of printer on, I reinstalled all the ink cartridges. The printer worked.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• A connection error when I try to launch games for windows.

  A connection error when I try to launch games for windows.

  It is said...  Connection error. Cannot start the program. There may be a problem with your Internet connection or the Live service.

  If you have problems with an Internet game, look at the following article.

  KB 2528246 - troubleshoot games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  They have a lot of suggestions which may help your question.

  Sincerely,

  Marilyn

• Jet P1102w laser: Printer USB connection error

  Hello

  Whenever I have try to plug the USB into my computer to print something a message pop up to say will "the device you connected is not readable by this computor" it has two options - ignore or eject. If I ignore the message, the printer seems to be offline. If I ejected, well, it is ejected.

  My computer is not the only one experiencing this problem. Two other laptops have been discovered to get the same message. They are all three Macbooks.

  We've had this printer for two years now and it has just started to happen. The printer also has many other issues that we pushed through, and it seems unfortunate to stop on it now; Help, please.

  Thank you!

  Greetings @KirsiAS,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with the printer is recognized. I will do my best to help you with this problem.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, and then connect the USB cable to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• try connecting a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3

  Original title: USB Port

  I am trying to connect a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3.

  There is no device USB not recognized message any device.

  Try a regular wired mouse or the keyboard to test the hypothesis that none of your USB ports work

  If this is the case:

  Start, type device in the text box, select Device Manager

  Right click on the USB one host controllers at once and to uninstall

  Reset

  Which should cause Windows to re - install their drivers

  Let us know the result, please

• Is it possible for a start of the HD connected by USB

  I tried to save my laptop, can anyone help with advice, please? The internal hard drive has been disconnected, just detached the motherboard port, ripping off the contacts, and it seems that it is not possible to weld back) so I'm trying to start the computer from USB. Is this possible? I have change in priority of BIOS boot USB HD, but he can't, can I write in command prompt? I really want to throw this laptop (sentimental attachment), it's Samsung, 3 year old. Windows 7. HD is good in itself, it's just he cannot be connected in its place internally, it can be connected to USB, is there something missing in Windows 7 command code to recognize and boot from it? Thanks for any help.

  You can use an external drive to start a machine in Repair Mode of Windows or Linux like Ubuntu environment, but Windows does not run on an external drive. Sorry, it's RIP for your machine.

• Dell laptop 14zxps with windows 7... I get the error code 43 problem when I connect my USB on my laptop

  Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D

  Try this.

  http://support.Microsoft.com/kb/817900

• How to prevent the download adobe dc for connection error after download the downloader?

  
  

  A TW professional forward for me to use the new adobe DC drive to prevent accidents and problems with error, id obtained when theyr'e of created pdf with my old and beautiful work Adobe 5.0 (8 MB)

  Ok. so I wanted to take adobe 11, beware of the amount of hughe (76MB) code for this simple player but when starts the 1, 8 MB adobe downloader himself argued a connection error.

  IAM won't lower my safety for a simple download secure (https) until I understand what adobe seems to have for this simple prog. As all can see it is connected a channel open to adobe, a https connection. And iam not Fort Knox, iam interested in higher security costs in order to avoid a simple and dirty adobe download

  

  Pls report tips like:... try to install the new driver or... allow any type of traffic for half an hour when using adobe download

  IAM sorry to write to a community of anonym while adobe itself undergoes a regular expression for this problem.

  at least adobe should or which can offer to the prerequisite of having to download theyr nagging stuff

  Hi lutzd4554317,

  Restart your system and try to download Acrobat Reader DC using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Kind regards
  Nicos