Connection Ethernet failed on my Compaq Presario CQ5320F, must be replaced, Windows 7 Home edition?

Similar Questions

• Compaq Presario 5400US - need network drivers for XP Home Edition. Wired connection.

  It woun't connect to internet using a good modem and cable (other PC connect successfully using this same equipment). When I type IPCONFIG, I get 2 results, one for Local Area Connection2 for LAC3. Two of them have 169.254.xxx.xxx IP addresses. Both Suffixes DNS blank and empty default gateways.

  When I go into network connections, the LAC2 says "Limited or no connectivity", but it lists a Linksys LNE 100TX Fast Ethernet Adapter. Linksys? I don't have any Linksys product. LAC3 says 'Connected' with the help of a WAN network driver. However, in the Notification area network connections has the same yellow triangle as LAC2. When I right click the icon in the Notification area and select "Repair" I always get the following ".." following action cannot be completed: renewing your IP address.

  If I right click LAC3 (the one that says 'Connected'), click Properties, click TCP. IP and select Properties, it is set to get an IP address and an address of DNS server automatically. It is also the same for LAC2.

  Client DHCP, DNS Client and call the CPP are started.

  I tried ipconfig/release, ipconfig/registerdns, ipconfig/flushdns, netsh winsock reset. When I run it ipconfig / renew I get messages (after he is sitting there for 2 minutes)
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...

  A run chkdsk /r have run the command netsh int ip reset reset.log.

  So, I went 2 network cards, restarted in the device and removed Manager and let Windows reinstall. Windows creates a new connection to the Local network (LAC4, 2 and 3 are gone). It only reads limited connectivity or none and is using Linksys LNE 100TX Fast Ethernet Adapter, like the previous LAC2. The previous LAC3, who uses the network never got WAN driver reinstalled. I don't understand.

  Since an adapter Linksys on a wired connection seemed odd I have tried to find what should be the correct network driver.

  I google "Compaq Presario 5400US" "driver ethernet" OR "network driver" and was taken to a page of drivers HP, which I think makes sense since HP now owns Compaq
  http://h10025.www1.HP.com/ewfrf/wc/s...UCT=93284#n430
  This page has nothing listed for network or chipset cards.  This, of course, has no meaning for me.

  Can anyone help?

  Select this version from the drop-down list on the link that I posted above.

  Depending on the size of file, it does not resemble an auto install file. Accept the agreement and unzip the file into a folder.

  So, download it to a folder and go to Device Manager.

  Click the network card in need of drivers, and then select manual search for drivers. Navigate to the folder where you extracted the drivers and the driver should install.

• Cannot connect HP printer photosmart all in one single 6510 with my windows 7 Home Edition PC

  Stuck!  Help, please.  I' ERVs uninstalled and reinstalled several times: restore PC previous working time. check all passwords and IP addresses.  Wireless network connection (group home) - says that it cannot connect to the top by evenb wireless, if it says printer is connected to the internet, as is the PC.  USB connection, it blocks on the drawing of the ethernet connection.  PC does not accept updates - they all fail.  Last week I had no such problems.  Rolfus

  FIXED!  Go back and do a «how to perform a clean boot in Windows»  Follow the prompts long enough and a bit complicated.  This will also solve the problems of a number of HP users with various issues.  Rolfus

• For what power factor fits in my Compaq Presario CQ5320F?

  I'm running a Compaq Presario CQ5320F with Windows 7. I want to put in a bigger GPU I installed now (A AMD Radeon HD 5450 Low Profile), so I have to replace my old a new supply. Power factor suitable for what to do?

  Here are the specifications of your Compaq Presario CQ5320F desktop computer. The power supply is a standard ATX PSU. The Corsair CX500 and CX600 are only slightly larger than the power supply HP stock and are known to adapt without problems. In addition, the CX500 and CX600 are highly recommended and favorite forum.

  Frank

• Compaq laptop Presario 2200 Window XP Home Edition

  Compaq Presario 2200 computer laptop XP Windows Home Edition - continuous reboot problem - need to restore with service pack disk

  Error message on blue screen

  "" "STOP: 0 X 00000024 (0 X 00190203, 0 X 85791008, OXC0000102, OX00000000).

  Can someone send me restoration disk?

  No one will send you a restore disk... but the good news is that you need.

  See responses from August 7, 2011 "A User" here--> http://answers.microsoft.com/en-us/windows/forum/windows_xp-update/blue-screen-on-boot-up-stop-0x00000024-0x00190203/40e95bcd-160c-450c-8d5c-cffee739bc90?page=1

  Unfortunately, the link mediafire for xp_rec_con.iso is not good, but you can get it directly from "A. User' here--> https://onedrive.live.com/?id=EC673DF6F8DFEE84! 109 & cid = EC673DF6F8DFEE84

• Reinstalled windows xp home edition in HP Compaq nx6110 No Internet!

  I reinstalled windows XP Home Edition in HP Compaq nx6110 and the drivers appear in yellow

  Ethernet

  Multimedia Audio

  Network controller

  Modem PCI

  Video controller

  Video controller (VGA compatible)

  I can't connect to the Internet, no sound.

  Please help me,

  Thank you very much!!

  You are the very welcome.

  You have to have XP SP3 installed for the wireless to work right, or you must have this patch for SP 2.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  The link I provided has all of the XP drivers you need.

  You must select the XP operating system from the menu drop down.

• Satellite L40-139 - need driver Windows XP Home edition for 'ethernet '.

  Please can you send me the link to Satellite L40 ethernet control model of laptop for Windows XP Home edition?

  Hello

  Satellite L40-139 belongs to the PSL40E series. Am I wrong?
  You can check the serial number of your laptop. It should be placed somewhere at the bottom of the unit. Check all labels.

  Anyway, the Toshiba driver European page doesn't provide XP drivers for this series at this time. Seems you have to wait a bit until all pilots to be released!

  For the only moment that two versions of the BIOS for L40 PSL40E if released.
  The BIOS must be updated to the XP version, if you want to use XP on this laptop.

  By the way; It seems that this series is supported by the Base map - TX Ethernet Realtek 10/100.
  Then you can try the LAN driver from the site Web of Realtek. Should also work.

  Good bye

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• Windows XP Home edition for the satellite A100-337 ethernet controller driver

  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  See you soon

  Hello

  On Toshiba download page that you will not be able to find drivers Windows XP Home edition for laptops pre-installed with the Vista operating system.

  I have google a bit and discovered that your laptop should have card LAN Intel Ekron-R (82562GZ). Try to visit the Intel support page, maybe you can download driver for Windows XP Home edition operating system.

  Good luck!

• I lose the connection Wireless for Windows XP Home Edition

  Hi, my first question here!  I have a laptop Toshiba Satellite with Windows XP Home Edition.  I have a Linksys wireless router.  Regularly, when the laptop hibernates or sleeps and turns the WiFi connection is lost.  Trying to 'fix' or 'connect' is usually unsuccessful.  Most of the time, after the reboot, it reconnects. Any suggestions?
  Thank you very much!
  Ken

  Assumed as replied, without other added messages

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• ____2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection? __othervise how?

  • I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
  • 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
  • othervise how?

  Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  I need more info on how your network is configured to answer the question on the other.  How is the computer connected to the internet?  It connects wireless or cable to the router or modem or through ICS from another computer or what?  How do you change between the sharing of internet connection currently?  What happens when you try to enable both connections at the same time (or do not have two connections)?

  Thank you.  The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After sysytem restored in windows 7 Home Edition, laptop can't connect to the internet.

  Personal salvation of support
  I have a lenovo laptop with windows 7 Home Edition on it, whenever I have a system restore I have following problem with network connection.

  • WiFi: the problem with the Wi - Fi connection is it says it has limited connection to the internet, the system receives a valid ip address of modem/router (DHCP). But system is unable to ping the address of the router (gateway address), similarly it cannot ping localhost or 127.0.0.1. It says general failure. Then I try to give the IP address manually on the wireless card, but I have the same problems
  • Wired: when I turn off the wireless connection and want to connect to the laptop via a network cable to the router I have the same problem, it cannot ping the localhost or 127.0.0.1.

  I tried the following, but it didn't work.

  • ipconfig enough and ipconfig/renew
  • Flushing the DNS system
  • netsh winsock reset all.
  • netsh int ip reset all.

  I saw several online forums, but couldn't find the solution to this problem, the only solution is to restore the system to factory setting, and then it works. Wired and wireless network works fine

  What is the solution to this problem, this is not an appropriate solution, is it a windows M S for this solution.

  Your help is highly appreciated

  Thank you

  Tahir

  Hello

  Open network and sharing Center, click on your wireless network connection.
  Click Properties, double-click Internet Version 4 Protocol.
  Select obtain an IP automatically, and select obtain dns server address automatically.
  check if it works
  method 2:
  This is perhaps a problem with your wifi driver.

  Open Control Panel, click hardware and sound. under devices and printers, click Device Manager. Expand network adapters and then double-click your network adapter. go to the driver tab and then click on set to update driver (leave the pc it automatically searches). Once he did try if everything has worked.
  see this page for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  I hope that helps!

• See 4.6 Client installed on Windows 7 Home edition does not connect to the Manager

  Dear friends,

  I just joined this communitity, need help with a small problem of debugging that arrested me in the track.

  I recenty view upgrade 4.5 to 4.6 view, upgrade some services don't prevent not problems, but I have overcome by reading the blogs on the internet. After the upgarde I can't connect to connection Manager from the view of my Client to view 4.6 - Vesrion - 4.6.0 366101. Only thing I can think that my view client 4.6 is installed on Windows 7 Home Edition. But I had no problem connecting to the connection manager when I saw 4.5 client installed on the same workstation.

  Any help will be much appreciated...

  In VMware View Administrator go to

  Display Configuration > servers > discovers the connection to the server > edit.

  Uncheck the box for «use a tunnel connection is secure on the desktop»

  then restart the view connection server service

• Driver Ethernet LAN required - laptop Compaq presario V3777TU for Windows XP

  I removed vista and installed windows XP in my compaq presario V3777TU , but I could not find the suitable driver for Ethernet LAN. Now my system doesnot detect LAN. Card Ethernet in my system is integrated 10/100BASE-T Ethernet LAN.

  Corinne

  You have Marvell Yukon Ethernet:

  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37792.exe

  Message edited by CherylG on 03/01/2009 18:55