CONNECTION HAS LIMITED OR NO CONNECTION, WINDOWS XP. Help!

Similar Questions

• HP deskjetF4580 printer range has limited connectivity and uses IP 169 instead of 192

  My wireless printer has suddenly displayed the error message saying ' printer has limited connectivity. Sound by using the property intellectual 169... that is not compatible with 192... Sytems contact administrator '. (that's me and I don't have a clue!)

  I've uninstalled and reinstalled the driver of priinter, but yet, it gives the same message and will not be printed. It will print with the cable, but I want to print wireless.

  Any suggestions gratefully received!

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Your question belongs here: http://answers.microsoft.com/en-us/windows/forum/networking

  The presence of the "169" address indicates that your printer is not able to get an IP address from your DHCP server.  Check the network settings in the printer.

• my computer has limited connectivity to my wireless network

  I have windows 7 Home Basic 64 bit. I have the network wireless in my house, but would not have access to the internet on my laptop. It connects to the network but still warn me that your computer has limited connectivity to my wireless network. Please help me!

  Hello

  1. have you made changes on the computer before this problem?
  2. you receive an error message or error code?
  3. What is the number of brand and model of your computer?

  4. who is the ISP?

  Method 1:

  See wireless and wired network connection problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2: You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

   

  Uninstall and reinstall the network adapter driver.

  Step 1: uninstall the network adapter driver.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. find the network device based on the option of the network card, right-click on it and select uninstall.
  d. restart the computer.

  Step 2: Download the latest network card driver on the manufacturer's Web site and install it on your computer.

  Hope the above information is helpful.

• WiFi connection works, but cable has limited access.

  Hi I had a problem with my internet connection under windows 8. I got 2 networks, public and private, and I can't delete one of them. I tried turning power on/off (network location) sharing, to update/reinstall all drivers and windows updates. If I unplug the cable, connection Wi - Fi works very well. But when the cable is connected, wifi says connected, but does job and cable has limited access. If I turn off wifi, cable always says no internet access. Internet works fine on my other laptop with win7. I am connected to a mobile internet with modem usb Axesteel by WL500gp (oleg firmware). Here is a picture of my problem:
  
  + ipconfig/all with my cable disconnected, otherwise I couldn't post.

  Windows IP configuration

  Name of the host...: Ducktide-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Local Area Connection wireless LAN adapter * 22:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Hosted network virtual card
  Physical address.... : 52-08-CA-83-59-A4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : 12-08-CA-83-59-A4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet Ethernet adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... : C8-60-00-11-AE-9E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: No wireless Qualcomm Atheros AR9002WB-1NG
  network adapter
  Physical address.... : 00-08-CA-83-59-A4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::7cb8:2081:678d:d3d6% 12 (Preferred)
  IPv4 address...: 192.168.1.134 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Monday, December 23, 2013 16:33:57
  End of the lease...: Tuesday, December 24, 2013 16:42:51
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 251660490
  DHCPv6 DUID customer...: 00-01-00-01-18-17-B5-8C-00-08-CA-83-59-A4

  DNS servers...: 160.218.167.5.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:79fb:340 b: 3b1b:3f57:fe79 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::340b:3b1b:3f57:fe79% 16 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {4EE390FE-FA6B-4548-825E-E5A2F3A33080}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #9
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {2206F404-0D8D-4EE5-B28E-898469440B68}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #10
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi Jerry,

  Please, try the following steps:

  Method 1:

  You can click on diagnose to see if it shows the error message at the time of diagnosis.

  The diagnostic button is the screenshot you sent for the status of the Ethernet.

  Method 2:

  Reset the TCP/IP stack.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

  The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

  a. open an command prompt, press the Windows key + X select prompt as an administrator.

  b. When the user account control box pops up, click on Yes.
  c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

  netsh int ip reset c:\resetlog.txt

  
  d. Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

  SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
  SYSTEM\CurrentControlSet\Services\DHCP\Parameters.

  e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

  Method 3:

  Uninstall and reinstall the device adapter NIC from Device Manager can help.

  How can I troubleshoot network card?

  In addition, the driver version 7,077 for the Ethernet tΘlΘcharger the link given below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Please post with the State of the question.

• Computer has limited or no connectivity and no IP address is assigned.

  My computer is connected to my router but it says that my computer has limited or no connectivity. He said: no ip address has been assigned. I've already changed my router. It is connected to the router by an Ethernet cable. I know the router works well because I called the company and also my ISP. They told me to get a new router, which I did, but it still does not work. I have 2 laptops connected to this router and an Xbox 360 connected to it. I called the ISP customer and also the router company. I changed the router and I also tried another Ethernet cable, and they do not work. I tried to unplug my router and return connection and it does not always work. Help, please!

  Try this

  http://www.ehow.com/how_6763350_xp-but-cannot-connect-Internet.html

• 6.10 Access not opening connections window not

  Hello!

  For some time, I had the problem that the configuration of dial-up Connections window does not open. The icon in the toolbar does not work as expected, it displays the configured profiles and I can switch between them. But I can not edit them or create new ones, because the configuration window does not start. The accessconnections task is running in the background, but there is no visible window.

  I'm using version 6.10 under Windows 7, and the problem exists on several different models of ThinkPad (R500, R61). Reinstall did not help.

  In both cases I know that Windows 7 has been updated to Vista, I'm not sure if this is the case for all the machines involved.

  Any help would be appreciated!

  Thank you!

  --

  Timo

  OK, I spent in the version to 5.98 and work.

• Problems of connectivity windows 7, conflict and the IP configuration errors

  I have an Asus computer with windows 7 installed. My internet provider is verizon fios, and this problem does occur at home with my computer. Other computers or devices work fine on the network. I get a message that says: there is an IP address conflict. I rest and renewed my IP address through cmd with no luck. I found that if I troubleshoot the network by clicking on the red x, recover the wireless connect 2 and it will work for a period of beginning of disconnect and reconnect. I'll try to diagnose the problem to get the error message of 2 wireless connection doesn't have a valid configuration. I tried everything in the forums for weeks without success. Cmd prompts including changing DNS, Hello settings, but nothing has worked.

  Hi Nick,

  Try setting power off all computers or devices connected to Wi - Fi in your home except your computer and check.

  This error message indicates that another computer on the network using the same IP address that your computer uses. Follow the suggestion of this Microsoft article and check if it helps.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows/get-help-IP-address-conflict#1TC=Windows-7

  I hope this helps.

• Unable to connect to online help when using windows help and support via the start menu and other programs that connect to online help in addition to the built in help. I have no problem online.

  "you are not connected to online help, that introduces you to our latest content. Check your internet connection and then again connect to online help. If you see this message, the online help service may be temporarily unavailable.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  OK after rebooting in safe mode and try to help online which worked. I stop, rebooted and worked in the online help. He has never before. Turns off again, installed 27updates windows assistance online dhte still works!

  Worth a try?

• Limit connections Windows 10 IOT Enterprise Concorrent

  Hello

  I was wondering where I can find this information...

  How many simultaneous connections Windows 10 IOT company allowes? Is there anything like table with these data, including the embedded Windows version?

  I found the details to previous versions, but they do not understand the built-in versions...

  (http://weblogs.asp.net/owscott/windows-8-iis-8-concurrent-requests-limit)

  Hello

  As this issue is linked to a simultaneous connection please ask your question here:

  https://social.msdn.Microsoft.com/forums/en-us/e8346358-A357-425d-8842-e3fdab52bb3e/Windows-10-IOT-Enterprise?Forum=wes8

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• Why the control panel network connections window does not show my active network connections.

  There is nothing visible in the network connections window. I still have full internet access.

  Hi GarryKerluke,

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  See the Microsoft article below and check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Connects Windows Mail is no longer in my Cox mail server. I can't receive or send via Windows Mail.

  Connects Windows Mail is no longer in my Cox mail server.  I can't receive or send via Windows Mail.  Cox saying as long as I can use their web mail service (I can), the problem is on my end. How can I get Windows mail works again?  Can I uninstall windows mail and install a more recent version?
  original title: Windows mail will link is no longer

  I arrived on the response of Microsoft service.  They hooked me up to a tech.  He took control of whew my office, my email to redefine settings and got me working again!

• Is there a way to connect Windows calendar to a blackberry to automatically update the information?

  Using the calendar with blackberry

  Is there a way to connect Windows calendar to a blackberry to automatically update the information

  See if this helps: http://forums.crackberry.com/blackberry-curve-83xx-f52/sync-windows-calendar-vista-86310/

  According to the forums at http://www.blackberryforums.com/, it is not possible to directly synchronize a Blackberry and Windows Calendar.

• Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect.

  Original title: Dial-up connection

  Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect," even if I'm already connected to the Internet...  How can I get rid of the popup window?  All my updates are installed.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Search for the issue in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

• Empty Connections window network and could not start the network connections service

  Problems with Verizon router and during diagnosis discovered that the network connections window is empty (found by clicking on change settings for the network and sharing Center map).  We are currently connected to the Internet with the new router and Ethernet cable, but the cannot connect wireless (what we could do before) - apparently not to display icons in N.C. window is not necessary to have connections.  Found a reference to the network connections service and check it is running as a solution to the window being blank.  The service is not running, and when I try to launch it I get "Error 1083: the executable program that this service is configured to run in does not implement this service."

  I've seen a lot of suggestions on fixes for the problem of the empty window.  I did the sfc /scannnow and found no problem.  I tried to update the network adapter driver, but it was very good.  None of the solutions seemed appropriate perfectly adapted to this situation.  Is this really a problem?  Any suggestions on what to do about it?  We are about to use an USB adapter until our connection speed and I want to make sure that everything works first.  Thanks for any help.

  Hi EWright1, we will check the settings of the service.

  Click Start, type CMD. EXE and press {ENTER}

  Type the following command and press ENTER:

  REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  Copy the output and post with your response.

  Ramesh,

  Thanks for the suggestion. The output of the query to register below.

  C:\Users\Edward > REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman
  DisplayName REG_SZ network connections
  ImagePath REG_EXPAND_SZ %SystemRoot%\System32\svchost.exe - k netsvcs
  Description REG_SZ objects manages in the network and remote access connections folder, in which you can view the network local and remote connection
  .
  ObjectName REG_SZ LocalSystem
  ErrorControl REG_DWORD 0x1
  Start REG_DWORD 0x3
  Type REG_DWORD 0 x 120
  RpcSs DependOnService REG_MULTI_SZ
  ServiceSidType REG_DWORD 0x1
  REG_MULTI_SZ RequiredPrivileges SeImpersonatePrivilege\0SeChangeNotifyPrivilege\0SeLoadDriverPrivilege
  FailureActions REG_BINARY 8051010000000000000000000300000014000000010000006400000001000000640000000000000000000000

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Enum
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Parameters

  Hi EWright1,
  Follow the steps listed under "Reset Network Connections Service registry keys" in this URL:
  Difficulty for Service (Netman) 1083 in Windows 7 network connections error:

  http://www.Winhelponline.com/blog/fix-for-network-connections-service-NetMan-Error-1083-in-Windows-7/