Computer has limited or no connectivity and no IP address is assigned.

Similar Questions

• my computer has limited connectivity to my wireless network

  I have windows 7 Home Basic 64 bit. I have the network wireless in my house, but would not have access to the internet on my laptop. It connects to the network but still warn me that your computer has limited connectivity to my wireless network. Please help me!

  Hello

  1. have you made changes on the computer before this problem?
  2. you receive an error message or error code?
  3. What is the number of brand and model of your computer?

  4. who is the ISP?

  Method 1:

  See wireless and wired network connection problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  Method 2: You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

   

  Uninstall and reinstall the network adapter driver.

  Step 1: uninstall the network adapter driver.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. find the network device based on the option of the network card, right-click on it and select uninstall.
  d. restart the computer.

  Step 2: Download the latest network card driver on the manufacturer's Web site and install it on your computer.

  Hope the above information is helpful.

• Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

  Hello!

  I + really + hope someone might be able to help with this - been going slowly crazy.

  Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

  1394 net adapter (5.1.2535.0)
  Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
  Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

  I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

  I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

  After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

  Points to note:
  -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
  -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

  If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

  -Danielle

  Hello

  I think that the solution should be simple;
  I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

  Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

  He put everything on automatic

• What to do if your computer has been hacked or hacked and controlled by a remote elsewhere.

  Original title: hijacked, hacked into the computer

  What to do if your computer has been hacked or hijacked and controlled by a remote connection

  Furthermore.  Many different programs added and if I try to uninstall or remove programs I don't recognize
  I'm being denied access.  I have cleaned, restored and repaired my computer several times and it keeps
  happens to me on my laptop and my PC computers.   my user name is not changed, but the control
  is not outside of me and they're using my name.  Can anyone help?

  You must save your stuff important on an external and reinstall your entire system since the manufacturer's recovery partition. You can find instructions for this on the site of manufacturer support.

  If you have no recovery partition, follow...

  http://Windows.Microsoft.com/en-CA/Windows7/installing-and-reinstalling-Windows-7

  Immediately after having re-installed, the next task is to make all Windows, including SP1 updates if your floppy drive or the partition recovery date before the service pack.

  Then install your antivirus solution. Avoid using McAfee or Norton. It is a good solution, free and easy to use...

  Microsoft Security Essemtials... http://Windows.Microsoft.com/en-CA/Windows/products/security-essentials

  OK so far?

  Then, change the passwords for all programs that interact with the Internet... This includes Facebook, Windows Live Messenger, Yahoo Messenger, Skype etc.

  When you create a password, do NOT use real names and use a combination of numeric characters and alphabet, up and down case. It must be complex enough so that he could not be found in a dictionary, but not quite complex that you don't remember it...

• How can I tell if my computer has Excel on this subject and that so how do get me to it?

  How can I tell if my computer has Excel on this subject and that so how do get me to it?

  Check - in the search box type - excel

  It shows up?

  An excel Viewer Help, so you can see the files. If you work on them you need Microsoft Office or if you
  can use OpenOffice which is free.

  Microsoft's free excel file viewers

  Open Office - free
  http://www.OpenOffice.org/

  Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Attempt to analysis of images from a memory card. my computer has a memory card slot and a while, it will sometimes scan I get "scanner not found." What should do?

  Attempt to analysis of Images from a memory card.  My computer has a memory card slot, but I get Message no detected scan.  Shortly it will scan even if I get this message but then I can't find the images.  Where will the images when you scan Windows Internet Explorer?

  Attempt to analysis of Images from a memory card.  My computer has a memory card slot, but I get Message no detected scan.  Shortly it will scan even if I get this message but then I can't find the images.  Where will the images when you scan Windows Internet Explorer?

  Please specify exactly what you're trying to do. What you say makes no sense. To scan an image, you need a scanner. A scanner is a bit like a camera. You put a piece of paper in the scanner and it 'take a picture' of it and save the image. This process is called "scanning".

  If you cannot scan an image from a memory card.

• When I start my computer, it seems to stall until the CC box. As I am on a connection high speed limited is CC connect and stay connected to the internet using a portion of my allocation of limited use.

  Internet and CC slow down my computer at startup upward and using resources of my pocket money to broadband

  Stan, you can disable the creative menu topic Cloud file synchronization.

  Go to: gear on the top right corner icon > preference

  You can also uncheck "Start with the connection".

• CONNECTION HAS LIMITED OR NO CONNECTION, WINDOWS XP. Help!

  Hello, I bought a new computer in my house, and I did a system restore on my old laptop it reset to original settings so that I could give it to a member of the family to use. Now, as I booted the laptop "for the first time", it will connect to the internet. It shows that there is an available connection, but the status is listed as "connectivity limited or not. My current Desktop works well on wireless, like my phone and iPad blu - ray player. The only thing I have hardlined to my router is the xbox. However, my laptop connects. I tried to reset the winsock and IP and that did not work. I even ran the winsockpcfix and has not worked. Help!

  Here is my IP configuration for the wireless:

  Windows IP configuration

  Ethernet card Wireless 2 network connection

  The connection-specific DNS suffixes...:
  ... Autoconfiguration IP address: 169.254.243.3
  ... Subnet mask: 255.255.0.0
  ... Default gateway:

  If anyone can help

  Using Windows WZC or a third-party utility to manage the wireless adapter?

  Can you "view available wireless networks" and see your router?

  If you do not see the wireless networks available, is the Device Manager (start > run > devmgmt.msc OK) indicate problems with the adapter?

  If you can see your networks wireless from the list of available networks, I suggest the following:

  1. the removal of data for your Wi - Fi network.  If you plant a third-party utility, remove the 'profile' - but you'll have to read the user's Guide, if it is not obvious how to do this.  If you use WZC, then

  • Right-click on the icon of your adapter in the network connections wireless (start > run > ncpa.cpl > OK) and select Properties
  • Select the wireless networks tab and (a) ensure that the "Use Windows to configure my wireless network" box is checked and (b) in the list of preferred networks, select your network and click on remove
  • OK your way out

  2. to connect to the router configuration utility by using a computer connected to the router via Ethernet and (temporarily) disable all wireless security.  As a general rule, the only wireless security is that some level of encryption is enabled, but if you have enabled also a "MAC filtering wireless" or something similar, that disable as well.

  3. go to the computer (disconnect the Ethernet connection if you had done a) and see if you can connect successfully via wireless now.  Check your IP address.  It should be in the form 192.168.x.y, where x is probably 0, 1, or 2 (or look at one of the IP addresses of your work computer).

  4. If you can connect with encryption (and any other title) off, then back to the router, re - activate the encryption and try to connect.  It should work this time.

• Connection has limited or no connectivity / wireless network not detected

  So two problems here

  1. I used to transfer studies ultrasound scanner for my HP Mini 110 - 1025DX PC. For this I used to establish a connection to the system, where the name of the internet connection was same as in HP mini and address IP was also the same, except for the last digit (i, e XXXX:XXXX:XXXX:XXX1 vs XXXX:XXXX:XXXX:XXX2). Firewall Windows should also be disabled for mini HP transfer studies. I repeated these steps after reinstalling windows but icon in the mini bar of task HP says limited connectivity or none and so I can't transfer studies. How can I solve this problem.
  2-HP mini also has Wi - Fi. Is there a way can mini HP tell me networks wireless in my range so that I can choose mine, key network related so that my wireless internet access also starts to work.  I'll be very grateful for any help.

  You want to connect your mini to the ultrasound with a cable machine and the mini to your wireless router to access the Internet.

  The next part of the instructions

  Right-click on the icon for your wireless adapter and select Properties

  should have been

  Right-click on the icon for your Ethernet card, and select Properties

  in order to properly configure your Ethernet (wired) connection to the ultrasound machine.  Sorry for the mistake.

  And, of course, if the mini is connected to the machine to ultrasound with the Ethernet cable, it is not to connect to the Internet via cable.

  Maybe you need to explain more clearly what the situation is.

  • The ultrasound using a cable or a wireless connection?
  • You want to be able to plug a cable between the mini and the ultrasound machine and when you have completed data transfer, connect a cable between the mini and your router?
  • When you "used to transfer studies ultrasound scanner to your HP mini" could you unplug the cable from the ultrasound machine and connect it to your router and connect to the Internet?

• BlackBerry Smartphones it's Wi - Fi Service please make sure that your device has an active WiFi Connection and Try Again

  Hello everyone.

  I invested today in this device and I cannot get the browser to work, I had a quick glance around the blackberry on this problem and the forums help section.

  I created the WiFi its come up as 'Wlan_089A8C '.

  I can always connect to the browser.

  I see the browser is "HotSpot Browser", but in general properties how to change the default browser for another browser to work?

  CNA anyone help me?

  Thank you

  Rob

  RobCharles1981 wrote:

  How can I change the default browser for another browser to work?

  You cannot change the WiFi browser with another browser without going through THE BlackBerry data Plan.

  Call your carrier for more information.

• My XP computer has a domain user name and password and I forgot. How can I permanently delete.

  I would like to know how to change or remove

  Hello

  As you try to edit or delete the domain user name and password, it would be better suited in the Windows Technet Forum. Please post your question in the following TechNet forum:

  http://social.technet.Microsoft.com/forums/en-us/categories

  Hope this information is useful.

• My computer has sometimes get stopped working and gives message windows explore is restarted, what type of error is this and what is the solution for this?

  my title is best question exlpanation

  Hi risacond,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems with Windows Explorer.

  I will certainly help you in this matter.

  Follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• I need to download items 12 because my computer has a hard disk problem and need to reinstall if someone could please let me know where I can get a download please

  I need to download photoshop elements 12 since I changed my hard drive would be very happy if someone can help computers can't find it anywhere

  Thank you

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".