WiFi connection works, but cable has limited access.

Similar Questions

• My CC has expired (it's on different connection, work) but I can't open my CS6.

  Hello

  My problem is that I try to open my sonce of illustrator or photoshop CS6 it is something wrong with my software CC connection (it's work but I also installed on my PC).
  Usually, I have no problems to start my old, private CS6. But now when try to open my CS6 I noticed with my CC login that it has expired. If I type my CS6 login still does not work, and he tells my buy CC. This is something I am doing wrong?

  Thank you

  Hello

  You can also see account Adobe ID and login troubleshooting for CC connection problems.

  Hope that helps!

  Kind regards

  Sheena

• WRT54G - connection works, but problem connecting to some programs

  OK, first I'll explain the game up I have at home.  I use the WRT54G Router, the router is connected to the modem, and I have a desktop computer and a xbox360 both connected by ethernet cables to the router.  I also have a portable computer, which is the computer that has the problem, that connect wirelessly to the router.

  Is OK, the problem ONLY on the laptop.  When I try to go to any kind of big site of videos, such as youtube.com or watch some tv online, video shows only loading a little more, and that they will not play through.  They blow constantly. In addition, just try to load a game like bejeweled, it would probably take about an hour to load up! My computer is only about 2 years old and I had recently tested through company warrantly m and everything on the computer is fine.  He had recently been to the factory settings, so there is not any downloads or whatever it is to slow the computer down, its perfectly clean.

  I tried my computer with a friend, using its settings and internet.  The computer was working fine.  Played videos, responsible games.  Also, I tried the laptop hang until the router also using an ethernet cable and when I did the large working computer then too. This isn't the computer for sure.

  So, if anyone has any recommendations for me, that would be great.  In addition, if you want to know more information made me know...

  I consider myself a little bit more knowledgeable than a beginner, but not a lot... so would you please explain a bit in ordinary English (I know that makes me sound a bit silly, but I'll be honest and need help with this)...

  Please & thank yous.

  As you mentioned that when you connect to your computer directly to the router, you are able to watch the video without any problem, it is only when your computer is wireless to the router.

  Well I think you need to change some settings on your router. When you connect to her Router setup page, click on the Wireless tab and below the first thing you need to do is change the wireless channel: 11-2, 462 GHz and click on save settings... Then you must click the sub-tab under 'Advance Wireless' wireless settings and below change the tag at 50 interval, change the Fragmentation threshold to 2201, change the RTS threshold to 2202 and click on save settings...

  Now on your wireless computer you must disconnect your wireless network and re-connect to your network and check if you are able to play and watch videos without any problem.

  If still the same problem then I think that you need to update the firmware on your router.

  Download the Firmware on your router from the site Web of Linksys. Once you download the firmware on your router, you must follow the instructions below to upgrade the firmware of your router...

  Open a page in Internet Explorer browser on a computer hard wired to the router... In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Internet connection works, but Firefox doesn't load pages

  Internet connection works on Win7 Office (updates Windows, Google Earth works etc.) but Firefox & IE does not load web pages.
  Computer laptop (Vista) that uses the same router works Firefox fine.

  Performed various AV like Malwarebytes etc. software with no problems found.
  Re-install win 7
  Tried these solutions
  https://www.YouTube.com/watch?v=JK7oYj2YPNQ
  http://en.kioskea.NET/forum/affich-19117-Internet-connected-but-can-t-browse
  and other similar.
  Send from your cell phone like PC WIn7 does not allow me to connect and use the troubleshooting software

  Thanks for the reply, but I found the solution.
  Many answers forum suggest to change the network settings, but that does not work either.
  The combination which solves the problem was to run "SuperAntiSpyware" who found a virus that Norton has not blocked. AND to uninstall and reinstall my copy of Norton 360.

• Wireless networking works, but cable dose not

  My NAT type has been closed and I opened my router page to see if the ports are open, they were not, but the fact is that I've wound up with making a single change to routers setting but now my wired connection does not work but my dose wireless. I have reset the router, the modem, does a system restored, reset the switch and no change. Internet pages just load and load and never expire while my wireless works fine, I do that through my phone, so I'll try to give you this info I can but if I have to type all of this will take a while.

  Windows 7 32 bit
  Time of modem Warrener (brand name not sorry)
  Linksys e1000 router
  And switch ezxs55w
  Let me know what information you need.

  Hello

  Do you receive an error message or error code?

  Try the following and see if it helps.
  
  Method 1:

  Run the Windows 7 network troubleshooting. http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2:

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04

  Problems in Windows wireless and wired network connection:http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• WIFI connection works do not after Windows Update installation

  Original title: update windows

  My daughter who has just an update running on Windows 8. He wrecked his WiFi connection/settings. His internet now works on the wired only. Is it safe run a system restore?

  Paul,

  Tip: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or updated IE & restart.  If that does not resolve the problem, then try System Restore.

  Restore to before the update was installed check Windows updates and hide the update so it would not automatically reinstall and the program works.

  The time and date of this moment in Washington, United States of America is 16:14

  Tuesday, October 29, 2013
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 23:14 Tuesday, October 29, 2013

  Current weather conditions in Seattle

  Just55 ° F / 13 ° C

• My internet connection works fine and I can access all the links except facebook. Why is this happening?

  Everything works ok in my internet connection.  But I can't connect to facebook.

  You will find support for your problems of connection in the appropriate forum of networking: http://answers.microsoft.com/en-us/windows/forum/networking

  You will find support for Internet Explorer in this forum: http://answers.microsoft.com/en-us/ie

• My Belkin router has stopped working. After talking to Belkin support, we got it to work, but I can't access the site of iiNet connection.

  original title: Wireless router problems

  My Belkin router has stopped working the other day, so I tried the usual stuff (turning on an etc) in the end rang Belkin and after about an hour the router started working again, but would go only on the iiNet connection site! Go figure, not even with them. The woman to the Belkin told me to ring my ISP I did, and they got me online, however, my printer, the laptop and the iPhone is no longer will connect wireless. They were all working perfectly before the router dropped out.

  I went through all the procedures that several times. Uninstalled and reinstalled the printer and the router... still does not work.

  The printer can not just to find the wireless network. The test report said that everything went except the SSID, which has been a FAILURE. How can this be when I haven't changed the

  SSID?

  I've updated as well.

  Hoping really frustrated, can someone help!
  Thanks in advance!

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. What is the exact model of the router number?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The link applies to the Windows Vista and Windows 7 operating system.

  Problems of network with a router in Windows XP

  http://support.Microsoft.com/kb/315978

• Server with 10 TB LUN attached by physical brutes FC connection works, but second 10TB seems to be limited

  I have an ESX Server with two virtual machines on it, one of the servers is to store medical images. These virtual machines are essentially backup servers to servers that are physical (not virtual).  The main server is a physical server with an attached IBM DS4700 direct and secondary sandbox. I have 20 TB of data spaced so far.  Side virtual server also direct a of DS4700 attached to the area of ESX and he sees the first 10 fine to, as a single disc, and Yes, I know that this seems to go against the norm.  In any case we work for well over a year to date.  I add the second 10TB and I now seem to be limited by the expected 2 TB-512 b per LUN through documentation.  I would like to know why I was able to create the first 10 TB LUN without problem using physical RDM mode, but when I try to add the next physical drive from RDM on the same server (see 9.54 TB LUN very well), using the same method, why windows or should I say VMWare ESX is not being able to see the 10 to complete this time.  I am aware of the supposed limits, but the first works fine, why only now did he not see it.  To clarify the "Add" function of VMWare 9.54 Tb thin LUN during the creation of the new disc, but in Windows, it only recognizes the first 1.5 to (so it seems) I have not actually tried to format the volume in Windows and have yet once removed from the virtual machine.

  Windows 2008 64 bit standard on top of ESX 4 Enterprise Plus connected via direct fiber DS4700 and DS4000 with 10 TB on each table.  The virtual machine has been improved to version 7 machine and I have NOT tried add the second 10TB still with the new VM version. Thought I would ask first.

  Yes, you can map your volume of GPT in any physical Windows but I can't tell if you will experience data corruption or not, as I know that more than 2 TB volumes don't are not supported with current versions of vSphere.

  It is a good article on 2 TB limit, and how taken Windows support that: http://blogs.technet.com/b/askcore/archive/2010/02/18/understanding-the-2-tb-limit-in-windows-storage.aspx

  Tomi

  http://v-reality.info

• Satellite L350 - connected to the bridge with limited access

  Dear community,

  The proud owner of a L350, this weekend.
  Since then, trying to make wireless connections to my Linksys WRT54G Router.

  Still no luck. I don't see the SSID on the radar, but for some reason, that my laptop computer does not receive the correct ip addresses to my router to access the internet.
  Laptop is equipped with an Atheros AR5007EG wireless network adapter.

  Is there someone who is familiar with it and got it work?

  Faron

  Hello

  In my opinion, you should try to update the WLAN driver. You can find the latest version on the Toshiba site.

  Have you also tried static IP addresses? You need a correct IP address because otherwise it of not possible to connect to your router.
  Maybe firewall blocking something?

• VAIO w / Vista connect wireless but I can't access the internet on my router

  Help.  I have a SONY VAIO with Vista.  Just totally reformatted.  I can access my router (NETGEAR WNR 2000v2) locally, but cannot access the internet.  Curiously, I can connect to unsecured networks and access to the internet.  How can I solve the problem with my router/computer? I removed the 3rd party (Norton) security and made a few other commands nothing done. (BTW - I have 3 other devices that work fine on my wireless router.)

  Hi barry909,

  ·         You get the error message?

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Reference: http://windows.microsoft.com/en-US/windows-vista/Wireless-networking-frequently-asked-questions

• Active WIFI connections available, but status showing network adapter not connected

  Hello

  Wireless worked very well on my laptop HP Pavillion Entertainment, don't know what's happened, today when I turned on the computer, I was not able to connect to the internet.  In Device Manager, my Link 5100 AGN wifi is enabled. In properties, it says "device working properly", but the wireless icon at the bottom right shows "not connected, connections are available.

  Thank you

  DL 64 bit driver and installed, rebooted, no still no go, I gave up the onboard wireless card.     I plug in a USB wireless card, it works fine, so the problem is temporarily resolved.

  Thanks again

• Woke up to no link etherent, moved to WIFI that works but not ethernet taken RJ45 listed in used

  Last night, I disconnected and closed, this morning, when commissioning I found my network dead for me without any link with.  In setting network shows no Ethernet.  Moved to WIFI and everything works.  Simply not cable port to use.

  Read a rumour that a boost was deleted and map use ethernet.   Is it true if yes, what is the solution.

  http://www.iphoneincanada.ca/Mac/how-to-fix-Mac-Ethernet-port-not-working/

• HP 8600 info in Win 7 has limited access, not all icons are displayed.

  Tonight, HP has delivered my new Officejet Pro 8600.  Win 7 Home Premium install went perfect, everything is set up fine on my wireless network.  Or so I thought.  I did some research and found that the Solutions Center HP that I used for a long time on my 5610xi is not applicable to the 8600.  Disappointment, but I can deal with it.  After installation, I click on the printer on the desktop icon and a new window opens showing the printer in albums then 4 options:

  1 HP Printer Wizard

  2. setting preferences

  3 see what's printing

  4. customize your printer

  My first problem started when I clicked several times the "HP printer Assistant" and nothing happens.  Never.  Then I got REALLY irritated when I made the same installation on my laptop ASUS son and when clicking on the printer icon, a whole bunch of additional options appears, as in the old Center of Solutions.  Well, after many cycles of uninstall/install, nothing has changed.

  So my questions are the following:

  1. why the installation on the laptop gives more options (the options I want)?

  2. why "The HP printer Assistant" does nothing?

  To be clear, the printer works great and I love it.  Just a little frustrated on these issues.

  FYI, I am running Win 7 64 - bit Home Prem on each computer and all PC updates are up-to-date.  The laptop is a brand new (3 months) and the office is about 1.5 years, but running a high end processor, 16 GB of RAM.  Installation 8600 has been made from the CD supplied with the printer.  I tried one online and he brought a window similar to the one showing on the laptop, but with even more options.  The problem with this one is that it took an ETERNITY every time what you clicked on it then I reinstalled from the CD.

  I'm not completely sure why he is slow. Your computer is not the issue. I have the exact same software installed on a much lower end machine running Windows 7 64 bit and it works fine for me. How long have you since you have run a clean and optimized your system? If it has been a while, you could try to do this. I use Advanced System Care 6 free IOBit edition to keep my system cleaned and operates at full power. You may have ink alerts defined "Always" and change the setting "only when I print.» I would add a link that guides you through to change that. The link is for XP, but the steps are pretty much the same on any Windows operating system. I'll see if there is anything else I can find that could be the cause of this. Let me know what happens.

  http://goo.GL/R1qtd

• VPN Client - connection made but not able to access resources

  Hello

  I have two sites, A Site with a 5510 firewall and Site B with a user with a basic internet connection.

  I need the user to be able to access the PC and the servers here.

  I created a so called remote access VPN and the user can connect to this Site b.

  They get an ip and dns address but no default gateway.

  I am unable to what whether on the network 10.255.0.0/16 ping or access any servers.

  I'll post the config and maybe someone could show me what I'm missing!

  Thanks in advance

  I wouldn't recommend configure the ip pool in the same subnet as your internal network. Please configure a subnet pool a different ip address.

  However, with the current setup, you're absent NAT exemption for these subnets:

  allow inside_nat0_outbound to access extended list ip 10.255.0.0 255.255.0.0 10.255.11.0 255.255.255.0

  Hope that helps.