Connection ISV issues

Similar Questions

• Satellite L50 - B - 21 G: abandon WLan connection / power issue

  I bought my laptop about six weeks ago and its driving me crazy. I could be sitting with him and suddenly I lose the internet connection, I try to reconnect, but cannot as he seems to have "abandoned" the Broadcom 802.11n network adapter. I'm not very irritable but sees someone else has had this problem and follow a few instructions to restore the previous driver for the network adapter, but it just made things worse.

  In addition, I can never turn my laptop. If I choose the "shut down" option then it turns off, but there is always a light flashing around the power button. I heard he's going a few hybrid sleep, but I had instructions to stop this, but again its happening. I can't just press the power button to restart the laptop it restarts with the loss of the network adapter (see above), so I sit in pressing and holding the button several times until it restarts finally with the back working network adapter.

  If I just stopped the lid (as I applied this option overall upwards), then three hours I can just return, press a button and begin to work, however, once again, I can not because the network adapter is down and I have to then push and hold the power button (that choose shut down doesn't seem to work).

  This laptop was designed to replace an old ADVENT that caused me grief, but I'm done with nothing else than a box of junk that I want to throw. Worse yet, I'm not at all way techy am so not able to do what many of you can do to correct problems so I tried to find a phone number to call Toshiba and never get an option to type in what is my problem and then follow the online help that I tried and does not work! Y at - there someone who can give me a number for Toshiba that I can call for help if I need help more than anybody can give me here? Thank you.

  I have already answered in another thread with the similar question of Wlan and I guess it could be a related issue of energy saving:

  Reach:
  Windows power options - choose the right central - advanced power options.
  Search of the WLan card settings and set it to "best performance".
  You must also set the parameters for the PCI express for the 'best performance '.

  In addition, go to the Device Manager. Choose here the Wlan card properties
  Switch to the last tab called "Power Management" and make sure that the option available in this tab is not checked!

• Direct access the 4 G/LTE Verizon's internet connectivity-related issues

  During an attempt to access remotely via a Direct access to a tablet with 4 G/LTE from Verizon, we are unable to access the internet. Before the installation of a Direct access on the Tablet, 4 G high-speed worked fine, but once the Tablet has been recreated for a Direct access, we no longer had access to the internet. A call to Verizon revealed that the Tablet has been connected to the system of Verizon, but is was not connected to IPv4 or IPv6, and whether Verizon could not move forward. Are there Direct access settings that should be addressed in order to allow access to broadband (4 G SIM chip)? Thank you.

  Hello

  I understand that you are unable to access the internet during an attempt to access remotely via direct access on your tablet.

  To better understand the issue, please send us the following information:

  1. What is the brand and model of the Tablet you are facing problems with?
  2. The problem occurs on other laptop or Tablet?
  3. You are connected to the domain network?

  If you are connected to the domain network, you can post your request in the forums TechNet from the link below:

  https://social.technet.Microsoft.com/forums/en-us/home

  It may be useful, get back to us with the required information and we will be happy to help you.

  Thank you.

• 'Skype cannot connect' Windows issue 8

  Hello

  Recently, I tried connecting to Skype and it displays the error "Skype cannot connect. I am sure that my internet connection is stable, and I'm using the correct password because my Skype sign me usually automatically. I tried to update to the latest version, but also to remove Skype completely and put it back, once again, but nothing helps... Please help me!

  I managed to uninstall Skype forcefully to help uninstall software (my computer was not allowing me to uninstall the program correctly) and reinstall it again and who did the trick. Thanks for the help though!

• Updated since E3200 to a WRT1900AC - connectivity/performance issues

  I used pretty well parameters by default when I swapped the routers.  DHCP is enabled but the router itself is on intellectual property 10.61.181.11 and all my devices are 10.61.181.100 - 199.  I'm not Mac address filtering.  Both 5 & 2.4 Ghz are mixed personal mode with auto-width of the channel.  The networks have the same name, except the 5 GHz has added name _5GHz and the password are now the same.

  I have a wireless module iFit connected to the E3200 without a problem.  However, I can't establish a connection with the WRT1900AC anything.  I tried to set up automatically as well as manually.  The requirements are 80211.b, active and no DHCP which I believe that I have mac address filtering.  Any suggestions on that may affect this settings on the router?  Networks should be named more differently that just the _5GHz?  If they have different passwords?  The IP addresses must be in a different range (192.168...)?

  I also agree that there are moments where things slow to a crawl and I can not access my router of the web tool.

  Any suggestions on the development of this would be greatly appreciated.

  Try WPA or WPA2 modes personally only a test. No mixed modes.

• Internet with possibility of connection DNS issues

  Able to browse internet but cannot solve half of sites visited.

  [Window title]
  Windows Network Diagnostics

  [Main instruction]
  Windows cannot find the host name "books.google.com" using DNS

  [Content]
  The domain name server is maybe out of service.

  [Windows found a problem that cannot be repaired automatically] [Cancel]

  [Window title]
  Windows Network Diagnostics

  [Main instruction]
  Windows cannot find the host name "books.google.com" using DNS

  [Content]
  The domain name server is maybe out of service.

  [Windows found a problem that cannot be repaired automatically] [Cancel]

  There is a router involved and seems to operate normally.  Config IP/tous indicates that 192.168.2.1 is the IP address of the DNS.  Looking for tips to solve problems

  I think your DNS server IP is incorrect - it is a local IP address and you want a (often, they include two) provided by the ISP who has been on the internet.  Set DNS settings for the DNS setting automatically if they are not already like this.  If this does not work, then contact the ISP and ask for their help in the configuration of your connection - specific DNS settings.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connect to issues with mobile LR

  Hello

  I bought LR mobile and now unable to connect. I'm told my subscription should be upgraded and my trial offer has expired. Any help is appreciated.

  Mobile Lightroom is available for 30 days to try it with Lightroom 6

  You need subscription Lightroom CC to use it after the 30 day trial has expired

  Here is the difference between Lightroom cc and 6 compare Lightroom CC vs 6, 5 versions. History of Adobe Lightroom CC

  ~ Assani

• 802 connections access issues. 1 x

  My University has recently changed how you connect to their network. The network uses PEAPv1 with EAP - GTC and require WPA2 with AES.

  When I set up a connection using dial-up connections and select "802. 1 x security or other security"in the menu type of wireless security. then select properties of the only option that I give myself to the encryption type is WEP. Be able to connect, I need WPA2.

  I'm runnning Windows Vista SP1. I have a Lenovo X 61 and I'm using the latest version of Access Connections (5.22 I think).

  As an additional note: if I uninstall the dial-up connections from my machine and the configuration windows by default with the app SecureW2 for PEAPv1 with EAP - GTC wireless, I can connect to the network.

  Thanks for any help.

  The first thing SecureW2 is installed when logins is?  If so, need to make it out of the way (and could certainly cause this problem).

  Then I guess that the wireless card is not correctly installed.  Install the driver here:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70505

  I suggest you uninstall any driver you have already installed, restart, cancel the found new hardware wizard and then run the Autorun.exe from the downloaded driver.

• DB connection close issue - help

  Hello

  I use jDev 11.1.15, I have a scenario where I'm passing my form values to a stored procedure to db operations. To do this, I get the values in my grain of support form. Then I will pass these values of java class AMImpl.

  pageDef Action method:

      <methodAction id="deleteMapping"
                    InstanceName="AppModuleDataControl.dataProvider"
                    DataControl="AppModuleDataControl"
                    RequiresUpdateModel="true" Action="invokeMethod"
                    MethodName="deleteMapping" IsViewObjectMethod="false"
                    ReturnName="data.AppModuleDataControl.methodResults.deleteMapping_AppModuleDataControl_dataProvider_deleteMapping_result">
        <NamedData NDName="mapId" NDType="java.lang.String"/>
        <NamedData NDName="modBy" NDType="java.lang.String"/> 
      </methodAction>
  

  I use in my grain of support

  OperationBinding mapDelete = bindings.getOperationBinding("deleteMapping");
  ---
  ---
  
  Map params = mapDelete.getParamsMap();
  params.put("mapId", mapId);
  params.put("modBy", currentUser);
  output = (String)mapDelete.execute();
  

  in my AMImpl Java class

      public String deleteMapping(String mapId, String modBy) { 
          String output = null;
          Connection conn = null;
          CallableStatement st = null;
          try {
              conn = getDBTransaction().createStatement(1).getConnection();
              if (conn != null) {
                  System.out.println("DB Connected");
                  String execProc =
                      "begin PKG_NM.SP_DEL_MAPPING(:ip_mapId," + ":ip_modBy," + ":op_errMsg); end;";
                  st = getDBTransaction().createCallableStatement(execProc, this.getDBTransaction().DEFAULT);
                  try {
                      st = (OracleCallableStatement)getDBTransaction().createCallableStatement(execProc, 0);
                      st.setObject("ip_mapId", mapId); 
                      st.setObject("ip_modBy", modBy);
                      st.registerOutParameter("op_errMsg", Types.VARCHAR);
                      st.execute();
                      output = (String)st.getObject("op_errMsg");
                  } catch (SQLException se) {
                      System.out.println("Exception @ deleteMapping ::" + se);
                  }
              }
          } catch (Exception e) {
              System.out.println("Exception @ deleteMapping  :: " + e);
          } finally {
              try {
                  if (conn != null) {
                      conn.close();
                  }
                  if (st != null) {
                      st.close();
                  }
              } catch (Exception ex) {
                  System.out.println("Exception @ deleteMapping finally :: " + ex);
              }
          }
          return output;
      }
  

  My class is able to hit the stored procedure and passing the params, after that he throw below mentioned exception

  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: java.sql.SQLException, msg = connection is closed

  If disconnection below the code in my class, his works very well. but I want to close the db connection after the process.

                  if (conn != null) {
                      conn.close();
                  }
  

  Kindly help me to solve this problem.

  Thanks in advance...

  --

  Virginia

  Hello

  is your application a typical ADF Application?

  If you use the connection of the Application Module (AM) you must not close this (ADF Resource Manager do this work for you, for a 'normal' ADF application)!

  Do you you only close the statement. So to remove this code tight connection.

  Greetings

  Martin

• One-click connection security issues

  One-Click Login to vCenter Mobile Access is certainly convenient, but it presents a safety hazard where a Blackberry is lost, misplaced, or in the wrong hands. Is it possible to configure this feature so that:

  1. It is disabled, or

  2. He recalls the name of the server, but not the user name and password, or

  3. He remembers a drop-down list of previously used names server, but not the Username and Password (just like the Virtual Infrastructure Client on Windows), or

  4. He recalled the name of the server (or a server drop-down list) and user name, but not the password.

  You can work around this problem by not forgetting to login previously used Remove information, but of course this method is prone to errors of omission.

  Well Yes, we connected this as a feature request for a future version.  Thank you.

• Connection behavior issues a warning on the free transform

  Say, how is it that the Dreamweaver connection behavior breaks whenever I try to manually insert a new Session inside variable? He said "the server behaviors panel is unable to determine if"Journal in user"or"Log In User"is applied to your page." Please select change server behaviors and change one of the two behaviors to make each identifiable uniquely. "even if there is only a real set of code on the page for a newspaper in behavior

  You manually change the code? DW server behaviors using a code recognition algorithm to determine if they exist on a page. If you manually change the code to make a change that would not could be accomplished through the behavior - DW will be able to recognize.  -What are you talking about?

• Unable to connect mobile to Satellite P300: service failure detection

  II manage with the Bluetooth feature on my C905 mobile.
  It is connected to my bluetooth hands free in my car without problem, but it does not connect to my laptop toshiba satellite P300.

  The laptop computer and the mobile phone will locate each other, but when I try to authenticate I have a "service outage detection" warning every time. my old phone connected without issue to my laptop, and I put all the phone settings according to the user's guide.

  Any suggestion would be appreciated.

  I read another post here that says to change ports... but I have no idea how to do

  instructions step by step would be great, if possible

  Thank you

  Kane.

  Hello Kane

  Have you installed latest Toshiba BT stack?
  I have the same model of laptop and I tested with my new LG BL40 newchocolate.
  It works perfectly. The war of any configuration made in only 2 minutes.

• 5740 OfficeJet All in One: 5740 printer OfficeJet connects but scanner is not on the wireless network.

  Hello

  I recently bought the above printer and the printer connected most of the time, the scanner becomes more reluctant on my wireless network.

  I just printed a document yet when I try to analyze only one or two seconds later I said it has not detected to scan. I don't know how the device connects - but because the printer connects OK probably is not a wireless connection / router issue?

  The only solution I found to this problem is to restart my system which is quite frustrating and not an acceptable response to long term. When I do this the scanner seems to operate normally, at least for a while.

  I installed all the software from the Web site, including the HP utility - yet I am also told that "computer scan can not be activated" because the software is not found - which is strange, because I installed all the software available.

  Any suggestions?

  Hey there @gggdfsdfsdaf!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions on the 5740 Officejet and its communication of scanning.  There may be a slight problem with the software.  I suggest you uninstall the HP software.  Once the software uninstalled I recommended to perform a "repair disk permissions" on your Mac.  A repair disk permissions is a utility built into the operating system Mac designed to detect and resolve problems or errors. After that permission to repair disc is finished, reboot your Mac computer and re-install the software.

  To uninstall the HP software, click: uninstall the HP software

  To perform a repair authorization disk click here: repair disk permissions

  To download the Officejet 5740 software, click here: 5740 Officejet full feature and driver software

  After the installation I recommend that you check the software updates on the Mac.  To search for software updates, click the icon "Apple" to the left and click on the "app store".  In the app store, you can click on the "updates" at the top of the window.  Updates install and Hp or a printer.  After the update, you must restart the computer.

  You can also launch scans of an application on the mac, called 'Image Capture'.  For Image Capture click "Spot Light" (magnifying glass) in the upper right of the Mac.  Image capture type and it should appear as one of the first options.  Open Image capture and on the left side of the window should display your scanner.  The scanner can be listed under 'shared '.  Select your scanner and you should have the options and settings on the right side for scanning.

  Please post back and let me know if this worked for you!

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Problems connecting to wireless G Linksys router

  I have problems with connectivity issues with my wireless router. I have a Verizon DSL modem which is wired to a Windows XP computer and the wireless router. I have a total of 3 computers wireless (1 Office XP wireless, 1 laptop Vista) and XP wireless laptop 1. For these last months, I had intermittent connection dropping issues. I tried to change the channel on the parameters 9-05:49 wireless and so on and so forth, but the only channels that work for a while are 9 and 11, but I still feel the droppings of connection. It's very frustrating and confusing especiall since the signal strength of connection seems to be good to excellent. There are moments when (very little) when the connection works very well, but 90% of the time I can't go on the internet or connect to my VPN for the job.  Any help will be appreciated. Thank you.

  Try this:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change MTU size to 1300, then click on save settings...

  Click the settings advanced wireless

  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...