Connect to issues with mobile LR

Similar Questions

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Portege M700 - 3 G-connection via Novatel & T-Mobile

  Hello
  My M700 is around the age of 12 months and now I tried to connect via a 3G connection to the internet. The build-in 3G connection manager Novatel (called MobiLink) offers 3 pre-installed configurations, none of them work for my T-Mobile SIM card.

  I can't find any clues (Toshiba or Novatel or T-Mobile) how to set up a working connection. I try to create a new profile, but have no idea on demand "APN:" or other necessary parameters.

  Is there anyone with experience on these issues with a useful suggestion?
  I know that my T-Mobile card user-number and the ANKLE associated with the SIM card.

  Thanks in advance,
  Peter

  Hi Riedel,

  If I were you I talk with T-Mobile and ask what APN you should use. A digital CAMERA is basically a string that you enter to dictate the software to connect to (e.g. TMobile), T-Mobile will be able to tell you what APN you must try to connect to usually.

  Good luck

  Paul2008.

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories

  Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices?  Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application.  IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.

  To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle.  I can't that assume Apple broke the connection in iOS 9.3.1?

  Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.

  All yo can do is to continue using the beta until the version is rejected in the pubis.

  Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?

  https://www.Apple.com/feedback/iPodTouch.html

• Portege Z30 - A - unable to connect to the GSM mobile network.

  Toshiba Portege Z30 - A Windows 7 Prof

  When I try to connect to a modem GSM receives the error:
  "Network connection based on a mobile broadband connection failed with the error code: 1.

  (GSM card works properly in other devices)

  Hello

  According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
  One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

  Recommend you to check the configuration.

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy

• Problems of internet connection of Bluetooth with Nokia 6680

  Hello

  After a reinstall of Windows on my laptop Portege R200, I'm not able to install a new connection using the connection from the bluetooth stack Wizard more. This only happens for the express installation of the battery, I want to do for internet connection. Connect bluetooth to your mobile generally is working, as it is the Nokia PC Suite application. Re-install the software doesn't seem to work.

  Test a little, I discovered the following:
  -L' Connection Wizard (either automatically or manually) is not mobile and authentication works without problems as well. But after this step, an error message appears saying that the connection cannot be established
  -If I use manual mode to create a connection error occurs after you choose the COM port
  -At the manual installation: if I use some other than 40 COM-port, the error no longer appears and it continues with the installation of the modem
  -Use of the program of COM Local Bluetooth to add a port, I get an error of creation of the port COM-40, too
  -40 COM port is not used by another application

  No idea what could cause this problem?

  Hello

  Did you use the Bluetooth connection before the reinstallation of the Windows operating system?
  It was working properly?
  Unfortunately I do not have a Bluetooth specification, but I recommend you to download the latest version of battery Bluetooth m.
  Check out this Web of Toshiba Bluetooth site:
  http://APS.toshiba-tro.de/Bluetooth/

  You will find a lot of descriptions.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Equipped with mobile broadband with Lenovo B560 / SIM card / no reaction if pushed SIM card

  Dear Forum

  I have byued "nine" one lenovo B560 - quiet price specifications.

  But now I'm trying to connect to internet with my SIM mobile broadband WebClient and do not find a way to do it!

  The laptop is equipped with a SIM-Card-Slot-In card and throug this Slot I can see some golden conectors.

  But if I turn on wireless with [Fn] + [F5] I can't see the WLAN on/off switch card.

  Even the installation of 5 ReadyComm has not resolved my probs.

  My mobile is Win7 home premium with the typical standard configuration, no change.

  Is there something that I did not?

  I appreciate any help, thanks in advance!

  Greetings - sand

  Hello mate,

  It's not because you have a card reader sim you have a modem installed inside.

  If your laptop is wwan ready, it comes with the sim card reader and installed antenna, and that's all.

  If you don't see the wwan modem in the Fn + F5 menu it is probably because you do not have a modem.

  Take a look here to see if you have a wwan modem or not: http://consumersupport.lenovo.com/us/en/configuration/configuration.html

• How can I connect a laptop to mobile broadband

  WiFi is fine. Ethernet ok too.

  Hi raymondash,

  1. What is the operating system installed on the computer?
  2. Who is the operator of mobile telephony to wide band?

  I suggest that you install the software provided by the service provider to mobile broadband and also refer to the manual supplied with the unit.

  For more information, contact the provider of mobile broadband services.

  What is mobile broadband?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-mobile-broadband

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• 2 external monitors with mobile W520?

  I am running Windows 7 / 64 bit on my laptop Lenovo W520.

  Is it possible to connect two external monitors to unity and to display screens independent of Windows?

  Robert W.

  RobertWerner2 wrote:

  If I read the link you provided correctly, I can correctly guess I CAN connect two external with just the mobile W520 screens and NO docking station?

  I tested today.  You can connect two external displays (1 VGA, 1 DisplayPort port) without a docking station.  The result is 3 independent displays - LCD of ThinkPad screen, the VGA and DisplayPort monitors.

• Unable to connect Bluetooth speakers with Windows 7 system

  Dear experts,

  I have a laptop HP Pavilion DV7-2014TX running Win7 Ultimate.

  I just bought a new Bose Bluetooth headset. I tried for 2 hours to try to pair it with my phone, but my laptop is not all bluetooth devices.  I tried as much as I know, but I'm out of ideas. The only thing that I think now is that my laptop is old enough that it is no longer compatible with the version of bluetooth on my helmet.

  Any help would be welcome, thank you.

  George

  Original title: Bluetooth

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use headsets Bluetooth of Bose enabled on Windows 7, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You are able to connect and use another Bluetooth device on this computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  The question may arise due to the incompatibility with the Bose headphones Bluetooth driver. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:

  Method 1:

  Try to follow the steps in the following link to resolve the problems with Bluetooth devices:

  The problems with Bluetooth devices

  (Note: article also applies to Windows 7)

  Method 2:

  If method 1 does not work, try to run the patch that is available in the following link and look for the question.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  Method 3:

  Alternatively, you can try to check if the Bluetooth support service is running.

  1. Click Start, type services.msc in the Start Search and press ENTER.
  2. In the list of services, double-click the Bluetooth Support Service.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click on apply and then click OK.

  Trying to connect Bluetooth speakers with the computer and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.