Connection network WRT54G & iPad

Similar Questions

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.

• Connect an apple iPad two televisions

  We have two Apple TV in the Office we need to connect to an IPad. We managed to connect one of the TVs now showing a PowerPoint presentation. My question is that we can connect two TVs to the IPad even? If this is possible please could you let me know how we can do this? TIA

  Hello. It is certainly not part of the normal application of AirPlay. If the two screens are not too far away, you might consider a multi HDMI splitter like Monoprice. Some of them use Cat 5 cable as interconnection, so you do not really long HDMI leads.

• I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

  I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

  Thank you

  To work with iOS 9.2, you must update iTunes to 12.4 v.

• Connection network satellite L655-121 always shows 'disconnected '.

  Model: Toshiba Satellite L655-121
  OS: Windows 7 Home Premium
  NETWORK card: Atheros 8152 - 1.0.0.36 driver version (also tried 1.0.0.26)

  connection network always shows 'disconnected '.

  I tried the following:
  -straight cable connection from the laptop to the router - no link
  -crossover PC-to-phone cable connection = no connection
  -used work cable from the printer to the router and the laptop to router - no link
  -changed (tested) cable and router port - no link

  also a linux distribution installed with shows the installed NIC but his are not all RX or TX packets
  diagnosis with toshiba used cable connected - message was "cable can be damaged or not connected.

  all other tests I should try/run before going to the Service Center Toshiba for repairs, and how long they can hold my laptop for repairs - the whole motherboard must be replaced?

  Are you using 64 bit OS originally that you got with your laptop?
  Have you noticed this problem from the beginning?

  Card LAN listed and activated correctly in Device Manager?

  When you connect the LAN cable is green LED on?

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• Error Msg: Local Area Connection network cable unplugged

  I'm installing Wi - Fi at home and continue to operate in the above msg.  I have wireless but

  I can't connect to internet at the "another computer" - not the host computer.  New router and adapter, double checked connections
  and have all the lights good... can anyone help?

  Hello

  'Local Area Connection network cable Unplugged' is a message that applies only if you use an Ethernet cable to connect to the router.

  See the documentation for your wireless adapter to find out how to connect wireless. Or number of the brand and the model this adpater for additional help.

  Tricky

• No connection network in Windows XP

  Have a laptop HP Pavilion dv6000 which was working fine one day and then the next - absolutely no network connection - either wireless or ethernet (local); even if the two network adapters are installed and have more up-to-date drivers.  In network connections there is nothing - all empty.   If I choose "New connection", going to be the Type of connection network and none of the boxes work.  Not going past this dialog box by clicking next.  Network Connection Wizard does not at all.  Some of the services that have air required to operate the wireless / ethernet - seem not to be installed and running.  Cannot find much googling that helps.

  Anyone have any suggestions on how to get my network without reinstalling XP.

  Hi Tlswift,

  Thanks for the information. Have you tested your relocation still. On a note side please remember that your key would be a good thing for this type of media that has been installed on your system. Which means that if you had retail XP you would need a key of the retail, OEM media you would need an OEM key. Alternatively, you can try to order replacement from Microsoft discs.  Please see the link below on how to filter of replacement order for yourself.

  Filter replacement
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Notification area; disappearance of the connected network icon

  Connected network icon has recently stopped appearing in the notification area, I can't see now, except by pressing the button Network Explorer, if I'm online or not. How can I restore this useful indicator of the network connection in the notification area?

  Try to delete the two registry keys, but create a system restore point before you delete them, just in case something goes wrong.

  Here's how, click the Windows Orb (start), type regedit and press enter in the left pane, navigate to Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify of HKEY_CURRENT_USER. In the right pane, there are two entries: IconStreams and PastIconsStream, right click and delete them, and then restart the computer.

  You will have to perhaps with the right button of the taskbar > properties > Notification area (bottom right of the screen) and put a tick in those who are missing.

• Why ASA in transparent mode require same subnet ip to that of the connected network

  ASA transparent mode, why it is necessary to keep the management ip on the same subnet to the connected network?

  What happens if I keep managing ip in a different subnet as the network connected?

  If I only did traffic to move through to the asa and why?

  thanxs.

  Hello Vijay,

  As you say you can use another, that is right, but the thing is that the IP address of management is not only used to draw management.

  Who was you are missing the point.

  That the IP address assigned to the ASA as a whole also will be used for ARP requests when the ASA does not know where the destination hosts lies and is not on the same subnet as the ASA.

  It will serve as a source for packages destined to a syslog server, server AAA, Netflow server, SNMP server, and any package that ASA will have to create so in that spirit the routing of the network will have to be modified to work with that.

  If you come to realize that the routing of the network works with a different management on the transparent address IP address then you can do it. I can assure you that I have seen this scenario before working with no problems at all BUD.

  Just to remember to Note all useful posts like this

  Looking for a Networking Assistance?
  Contact me directly to [email protected] / * /

  I will fix your problem as soon as POSSIBLE.

  See you soon,.

  Julio Segura Carvajal
  http://laguiadelnetworking.com

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• Check if a virtual machine has connected network and connect if it isn't?

  Thus, creating a big deployment VM automation workflow, I need a way to check and make sure that the deployed virtual computer has its connected network. However, I can't seem to find a way to generate scripts which correctly. Any ideas?

  Hello

  There are different strategies. Look at the 'vim3waitDNSNameInTools' action, it waits until the virtual machine arrives with a given host name. Which ensures that this customization is done completely.

  Alternatively you can ping the virtual computer by using the System.isHostReachable () method, find an example here: Ping on the workflow server

  (I remember there were some problems with this method in previous versions, be sure to properly test ;-))

  Another strategy might be to use the operations of comments and call a ping of in the guest operating system (with which you shall vro network connection to the virtual machine itself, you can for example leave the guest operating system ping the address of the gateway or so)

  Kind regards

  Joerg

• vmotion - box connected network card question is uncheck after vmotion

  Hi all

  I have a strange problem in Cluster DRS / rules of VM, we do vmotion

  After doing vmotion, VM addresses don't not ping, in the first time I think it's trunk network was not good.

  Do vmotion on the source host and not work.

  After checking configuration of the virtual machine, I see that "Connects" network adapter box is not checked.

  The box was check before, because the ping response machine before the vmotion.

  My question is very simple you already have this behavior?

  I use the following script to facilitate the operation.

  Thanks for your help

  Ludovic112

  $pViServer = '< servername > '.

  
  If ($viCon.IsConnected - eq $false - or $viCon.IsConnected - eq $null)
  {
  $ViCred = get-credential
  $viCon = Connect-viServer-Server $pViServer - Credential $viCred

  }
  
  $vmName = "< vmname >.

  
  $maVm = get - vm $vmName

  
  $cluster = get-cluster "< NOMCLUSTER >".
  $Listvmhosts = $cluster | Get-VMHost

  foreach ($vmHost to $Listvmhosts)
  {
  If ($maVm.host.name - eq $$host.name)
  {
  Write-Host "nothing to do" $maVm.host "-" $vmHost.Name
  }
  on the other
  {
  Write-Host 'migrate' $maVm.name 'to' $vmHost.Name
  Move-VM - VM $maVm - Destination $vmHost
  sleep - 60 seconds
  }

  }

  If the connected box gets uncheked after vMotion, looks like the maximum number of ports configured for your vSwitch on your target hosts is exceeded...

  / Rubeck

• E1505 with Vista operating system repeatedly lose the connection network through a router WRT54G

  Model: Dell E1505

  OS: Vista Edition Home Premium

  Processor: Intel Core 2 Duo CPU T5300, 1.73 GHz

  Device of wireless network: Dell Wireless 1390 WLAN Mini Card

  Wireless router: Linksys WRT54G

  My E1505 has a problem with the Wi - Fi being dropped at least twice a day / every day with an average of seven hours of use per day.  Almost identical to several offers from others, as I'm surfing the web and try to access another site, the connection just drops and I get the white screen indicating a network connection cannot be made.  Meanwhile, my utility for wireless LAN card reflects that I have a connection 'very strong' or even 'excellent '.  The only way to connect is to restart the computer.  I did a lot of research on the Internet and tried all the suggested actions to solve the problem (changing the settings of the power of the highest performance, by changing the channel of the router, updated drivers, etc.), but none of them have cured the problem.  I also spent more than 12 hours to talk or have a Dell technician remotely access my laptop to try and fix the problem, but nothing helped.  In the end, the so-called expert technician said they did everything possible and suggested I reload Vista on my computer again, or wait for the Vista Service Pack comes out with the hope that the problem is solved.

  Can someone please! It seems that I left without other alternatives, but to spend the next eight hours, reload all my programs that are inexcusable.

  Thanks in advance for your help.

  Here are the results of the IPCONFIG/ALL command:

  Microsoft Windows [Version 6.0.6000]

  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\damoke>ipconfig/all

  Windows IP configuration

  Name of the host...:-command post

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: dc.dc.cox.net

  Ethernet connection to the Local network: State media: Media disconnected

  The connection-specific DNS suffix. : dc.dc.cox.net

  ... Description: Broadcom 440 x 10/100 Integrated Controller

  Physical address.... : 00-19-B9-70-FF-E2

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : dc.dc.cox.net

  ... Description: Dell Wireless 1390 WLAN Mini Card

  Physical address.... : 00-1B-FC-44-A3-D5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::ac77:a83:c3bf:c801 %9 (Preferred)

  IPv4 address: 192.168.1.100 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Saturday, April 12, 2008 20:22:10

  End of the lease...: Sunday, April 13, 2008 20:22:09

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 167779324

  DNS servers...: 68.105.28.12

  68.105.29.12

  68.105.28.11

  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e50:203 b: 1 ca 1: 3f57:fe9b (Preferred)

  Address IPv6 local link...: fe80::203b:1 ca 1: 3f57:fe9b %8 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  The connection-specific DNS suffix. : dc.dc.cox.net

  Description...: isatap.dc.dc.cox.net

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::5efe:192.168.1.100%11(Preferred)

  ... Default gateway. :

  DNS servers...: 68.105.28.12

  68.105.29.12

  68.105.28.11

  NetBIOS over TCP/IP...: disabled

  C:\Users\damoke

  Message edited by MOKE DA 12/04/2008 21:24
  Message edited by MOKE DA 12/04/2008 21:25