Connection of limited "Internetion" connecting built in VPN on Surface RT

Similar Questions

• Unable to connect to the Internet after connecting to a VPN server.

  As soon as I connect to the VPN, I can't access the Web or e-mail.

  An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.

  Issues related to the:

  1. The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
  2. If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?

  Thank you.

  Realize that the VPN is intended to establish a secure connection to a remote network via a public internet.  Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet.  If "split tunneling" VPN server controls is allowed on a client computer.  If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box.  For more information:

  "Split Tunneling for concurrent access to the Internet and an Intranet"
    <>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >

  HTH,
  JW

• Connection to a VPN server enterprise, via an existing Internet connection - PPPoE

  Hi, I want to buy a router "EtherFast Cable / DSL VPN Router with 4-Port 10 / 100 Switch (BEFVP41) ' there is only one question: can I connect to the Internet on the PPPoE connection and use this connection to connect to the VPN server of your company through PPPoE or IPSec?

  You can connect to the Internet via the PPPoE connection on your router.

  If you use a VPN client software to connect to the secure your company network, there is usually a remote VPN server inside waiting to accept a connection of employees outside the corporate network.  All Linksys routers support VPN pass through and work with these types of connections. The only time that you need VPN Tunnel to the capabilities of the BEFVP41 is if you manually configure a secure VPN connection between two physical locations.

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Lose the internet while connected to the VPN

  I've seen quite a few threads of not being able to connect to internet when connected to the VPN. I tried to follow but have not be able to follow. I connect to the VPN via IE (that is connected by using Check Point). How can I go about it?

  That's the problem of split tunnel. In general, the VPN tunnel can be configured on the client side (as the native client VPN PPTP in Windows for example) or side Server (like OpenVPN for example) to force all traffic through the VPN tunnel or not. If all the traffic is forced through the VPN tunnel, which is what your description, internet access is controlled by the VPN server. It is a safety precaution to isolate the network side server from your local network.

  I would check with your network/VPN to help admins simply because may fall you on a server-side config that may or may not be changed according to their network security protocols.

• When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet.

  When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.

  Someone suggested this fix >

  Make sure that the default route has NOT changed to the VPN server.

  Open the properties of your VPN connection.

  Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".

  Disable the feature from default gateway.

  but when I do that so I'm not able to access our data HTML site that requires the use of VPN.

  Any help is appreciated

  This article describes what you see...

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  .. .and possible solutions...

  I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• REMOTE DESKTOP cannot connect home via VPN to WORK computer

  Hi all

  Having problems connecting to the PC of Office WORK PC using remote desktop.  Currently, I connect to the WORK PC to WORK laptop with no problems.

  Page HOME of PC is a Dell Dimension 4600 Windows XP, version of Microsoft Office Home, ATT, anti-virus Norton 360 Wireless internet service.  Work VPN up and running.  Set up my computer remote tab in order to allow the communication and remote AUTHORIZED Norton 360 desktop, I can PING my computer work fine.

  I run my VPN and connect to function properly the network but when I run the Remote Desktop application, I get "this computer cannot connect to the remote computer."

  I know that my work IP address and logon information is exact and know that my work computer is configured to allow remote access because I do this work laptop.  I do not understand why my home PC has a problem if the VPN works and I can PING my computer work fine.

  Any advice would be appreciated. I looked all over the internet and cannot find additional ideas.

  Use teamviewer, it is much easier to understand. And you can give the PC connecting to a fixed password youre. If you do not have to change.  Just install on both, give the youre one connecting a password fixed, then log in with the other

  Is XP Home or Pro? If it does not support his home desk remotely

• I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working.

  stopped my VPN connetion working.what I do?

  last night, I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working. I don't know if it's because of Socks5 or IPIG connections but I tried everything, including the restoration of my windows & uninstallimg 2 connections, I even deleted all my internet connections, including vpn & them reinstalled but nothing worked.when I click the vpn connection, it just shows that this message saying could not be contacted.

  is my windows homebasic .plz help of vista...

  Hi Melanie,

  You can consult the following articles and check.

  You receive the error code 741 when you try to establish a VPN connection type PPTP on a computer running Windows Vista

  Troubleshooting remote access VPN

  If you are working on a domain environment, then you will need to contact the system administrator for assistance.

• Unable to gateway ping after the connection to the VPN

  I've implemented a ASA 5505 with virtually any configuration. I changed the interface of the 192.168.168.250 inside and set up DSL PPPoE for the external interface.

  The ASA works perfectly for all my Internet needs so I set up a VPN using Ipsec VPN Wizard. This also works perfectly, except that I noticed a thing. Once I connect to the VPN, I'm not able to ping from the inside address of the ASA at the 192.168.168.250. When I ping or manage the ASA using this IP address, while I work on the site it works fine. Why is this and is there a way that I can change?

  Thank you!

  -Pete

  peterdallas wrote:
  I've set up an ASA 5505 with hardly any configuration. I changed the Inside interface to 192.168.168.250 and configured PPPoE DSL for the outside interface.
  The ASA is working perfectly for all of my Internet needs so I set up a VPN using the Ipsec VPN wizard. That also works perfectly, except I noticed one thing. Once I connect to the VPN, I'm not able to ping the inside address of the ASA at 192.168.168.250. When I ping or manage the ASA using that IP address while I'm working on site it works fine. Why is that and is there a way I can change it?
  Thanks!
  -Pete
  

  Pete

  Add this to your config file-

  ASA (config) # management - access inside

  all the details-

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/m.html#wp1987122

  Jon

• Unable to connect to the VPN. I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Recently, I upgraded my windows vista business to windows 7 Professional and can not connect to the VPN. When I did a search on the internet I found that this could be because of the mistake of sstp WAN Miniport. Windows has the drivers for it?

  Vijay
   
  Original title: miniport network driver extended WAN sstp

  Hi Vijay,

  You can view this issue in the Forums of TechNet Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Can I block the user to connect to the VPN 3030 by type of customer or version?

  I would like to block some users who use to connect to our VPN 3030 client Win98 or very old version of VPN client.

  Is there a way to set up my VPN 3030 so I can block customers? I don't want to push new customer for them or that you don't have a server radius or something like that to put them on an isolated network independent.

  I want to configure VPN 3030, is it possible?

  Thank you.

  Jayesh,

  Reach:

  Configuration | User management | Groups

  Go to the specific group and click on modify.

  On the IPSec tab, you will see a section for:

  Customer type & Version limiting

  For example:

  p *: 4.7*

  This will allow the version 4.7 of customers.

  See you soon

  Gilbert

  Write it down, if it can help

• Default gateway when connected to the VPN

  Thanks for reading!

  It is probably a dump so bear with me the question...

  I set up a VPN connection with a Cisco ASA 5505 giving over the internet, with customers behind him (on the same subnet), when environmental connected ot the VPN I can reach the router inside giving me and the other pass behind the router (each switch is connected to the router), but nothing else.

  My beets is that the router is to play with my connection, but nevermind that!, Setup is not complete when even... my question is more related to the bridge I'm missing when I'm outside, is connected to VPN on the ASA, pourrait this BUMBLE? I would not a Standard gateway in the command ipconfig settings in windows?

  That's who it looks like now:

  Anslutningsspecifika-DNS suffix. : VPNOFFICE

  IP-adress...: 10.10.10.1

  Natmask...: 255.255.255.0.

  Standard-gateway...:

  The internal network is:

  172.16.12.0 255.255.255.0

  Here is my config for the SAA, thank you very much!

  ! FlASH PA ROUTING FRAN VISSTE

  ! asa841 - k8.bin

  !

  DRAKENSBERG hostname

  domain default.domain.invalid

  activate the password XXXXXXX

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 172.16.12.4 255.255.255.0

  !

  interface Vlan10

  nameif outside

  security-level 0

  IP 97.XX. XX.20 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 10

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  DNS server-group DefaultDNS

  domain default.domain.invalid

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  172.16.12.0 IP Access-list extended sheep 255.255.255.0 allow 10.10.10.0 255.255.255.0

  MSS_EXCEEDED_ACL list extended access permitted tcp a whole

  Note to access VPN-SPLIT-TUNNEL VPN TUNNEL from SPLIT list

  standard of TUNNEL VPN-SPLIT-access list permits 172.16.12.0 255.255.255.0

  !

  map-TCP MSS - map

  allow to exceed-mss

  !

  pager lines 24

  Enable logging

  timestamp of the record

  exploitation forest-size of the buffer to 8192

  notifications of recording console

  logging buffered stored notifications

  notifications of logging asdm

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local 10.10.10.1 - 10.10.10.40 VPN IP 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any inside

  ICMP allow all outside

  ASDM image disk0: / asdm-625 - 53.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 172.16.12.0 255.255.255.0

  Route outside 0.0.0.0 0.0.0.0 97.XX. XX.17 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 172.16.12.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 172.16.12.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  internal VPNOFFICE group policy

  VPNOFFICE group policy attributes

  value of server DNS 215.122.145.18

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value TUNNEL VPN-SPLIT

  value by default-field VPNOFFICE

  Split-dns value 215.122.145.18

  no method of MSIE-proxy-proxy

  username password admin privilege 15 XXXXXX

  username privilege XXXXX Daniel password 0

  username Daniel attributes

  VPN-group-policy VPNOFFICE

  type tunnel-group VPNOFFICE remote access

  attributes global-tunnel-group VPNOFFICE

  VPN address pool

  Group Policy - by default-VPNOFFICE

  IPSec-attributes tunnel-group VPNOFFICE

  pre-shared key XXXXXXXXXX

  !

  class-map MSS_EXCEEDED_MAP

  corresponds to the MSS_EXCEEDED_ACL access list

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the icmp error

  inspect the pptp

  inspect the amp-ipsec

  inspect the icmp

  class MSS_EXCEEDED_MAP

  advanced connection options MSS-map

  !

  global service-policy global_policy

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e

  : end

  Right if disbaled all traffic will pass tunnel and snack active local internet gateway is used specific traffic wil go to the tunnel.

• Cannot send emails from gmail or yahoo when connected to the vpn

  I use a vpn to hide my IP address. When I am connected via my VPN I can't send emails from my gmail or yahoo accounts in thunderbird
  If I disconect vpn, they go through the fine

  Thanks for the suggestion, I've changed the security of connection for STARTTLS
  and they work

• Drives and airport Extreme Base Station to disconnect after connection to the VPN

  At home when I'm on WIFI, everything works fine. At the moment where I connect to the VPN to do office work, the base station will disconnect and accessible either.

  Any help?

  The problem you are experiencing is perhaps due to the type of VPN tunnel that you use to connect to your workplace. There are basically two types: 1) full or partial) 2. Note: The different VPN clients can use other words, but these are usually options when you set up a tunnel.

  When you use a complete tunnel, all traffic between your computer and the VPN of your working server, through the tunnel. No traffic is allowed on your local network, and therefore, all local resources are not available. With a partial tunnel, your computer data traffic, may as well go through the tunnel and also to your local network. One reason to use a partial tunnel, for example, is that you have a local printer, you need to perform printing. You can be connected to this type of tunnel for access to the documents and then, be able to print on this printer... otherwise, with a tunnel of full, you would print to a printer at your place of work.

• readers of connection but the VPN network not showing

  I have a couple of Windows machines that work very well, so I certainly have the correct information for VPN.

  When I hit 'Connect', it does not seem to connect to the VPN with success and I can see the data traffic in both directions.

  After that, I tried "Go to server" and if I navigate or enter the details of the server manually, it will not connect to network server actions.

  I think I have the completely straight oblique lines around and I tried to add the username at the end of the address of the server, which is an SME.

  I put as follows

  SMB://server/folder/

  I also tried smb://server/folder/username

  No joy. Can anyone help please?

  Thank you

  Navigation uses Hello and Hello does not normally work through non-local connections, so it will not work on a VPN connection. It should be possible to connect through a VPN by using one of the following URL format in "connect to Server".

  AFP://192.168.1.10

  or

  AFP://fileserver.domain.com

  AFP://fileserver.local will not work since it is reserved for the Hello that as I mentioned does not work over remote links.

  Note: Not everyone gets their properly configured VPN system for searching DNS is possible that afp://fileserver.domain.com may also fail but the numeric address should work.

  Note: Again according to the VPN configuration, they may need to define a static route and have failed to do so, it would break digital even answer, however if numeric address works for Windows, they must work for Macs.

  It is always interesting to try to PING tests.