Connection of the 9.1 - Option to leave a Message without phone Rining unit

Similar Questions

• When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files.

  Original title: Logger initialized O

  When I connect and the home screen appears I get this message: DLL environment initializeO-multiple Logger could damage files. What should I do? Thank you - E.Schmidt

  Hello
  
  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
     
  Try to perform the clean boot on the computer.
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
   
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I can't send emails. Error message: the connection to the server has failed. Subject 'test message 3' error number: 0x800CCC0E.

  Cannot send emails.

  Here is a message I receive. What I'm doing "?"

  The connection to the server has failed. 'Test message 3', account: ' mail.dawson - horses.dk', server: ' mail.dawson - horses.dk', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  Account: ' mail.dawson - horses.dk', server: ' mail.dawson - horses.dk',.

  1. Who is your mail server?
  2. Is it in Windows Mail?

  Unless it is your own domain name, you don't have the account set correctly.

• I am unable to connect to the internet. I get this error message "Windows does not have to connect to the System Event Notification Service service.»

  my computer is showing this message and custom allow Internet: Windows could not connect to the System Event Notification Service service.  This problem prevents limited users to logon to the system.  As an administrator (which I don't have) you can view the system event log to see why the service did not respond, can anyone help? Please

  original title: can't get on the internet

  Hello

  Try the steps in the following article:

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP and Windows Vista":

  http://support.Microsoft.com/kb/811259

• Could not connect because the maximum free accounts have been activated on this phone? I don't know what to do I have tired everything

  Im trying to connect to my iCloud with this new phone that I had and it won't let me. I restarted the phone completely and I Sven makes a new Apple id and I still get the same message. I don't know what to do from this point on.

  See if that helps - iCloud: the maximum number of free accounts have been activated on this iPhone.

• I can't connect to the other user account... error message read s 'user name' or password. We have not set up a password and user name is correct.

  I can not access another user account.  It to request a username and password.  I enter the user name is correct and there is no password.  The login page, used to have two icons of the user; but for some reason, the last log on the user icon is here and a new white icon for the new user.

  Once a week a few posters noted a problem similar to yours. In this case, I post the answer you see below. The little that I find very irritating that in each case, without exception, the poster was not able to return and account for the results, either because they found my recipe too difficult to follow, or because he or she lost interest, he or she could not be bothered to post a few comments for the benefit of other people with the same problem. There it is again...

  I do not know why you can not change this password, but maybe this method will shed light on the question:

  1. Safe boot mode.
  2. Click Start.
  3. Type the three letters cmd into the search box.
  4. Press Ctrl + Shift + Enter
  5. Click on "Run as Administrator".
  6. Type the following commands and press ENTER after each one:
     'John Doe' ppp NET user / add
     (to create an account called "John Doe" with the ppp password)
     net localgroup administrators/add "John Doe"
     (to promote "John Doe" to the Administrators group)
     net localgroup administrators/del 'John Doe'
     (to demote this account)
     NET user "John Doe" ppp
     (to set the password for John Doe at ppp)
     NET user "John Doe" / active: Yes
     (to activate this account)
     NET user "John Doe" / active: No.
     (to disable this account)
     NET user "John Doe" / del
     (do not delete this account)
     NET user
     (to view all existing account names)

• Unable to connect to the desktop application Adobe CC.  Gives message "You have been disconnected" please connect to t

  Already reset password and even uninstalled and reinstalled the application.  No change.  Just stuck in this loop.

  Hi RobCo,

  Follow step.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     • Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     • Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

  Please let us know if this has been helpful.

  Concerning

• When you connect to the sony Web page, I get a message, too large to display page

  I really hope someone can help me.  When I go on the internet on the homepage of Sony, it is too large to display and will not come?

  The internal memory of the XBR55HX929 cannot be extended.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• "Clearing NetBT" - unable to connect to the internet

  original title: "Clearing NetBT.

  I cannot connect to the internet. Option of repair used to connect to the network, but windows cannot complete the repair because "Clearing NetBT" cannot be completed. How can I do this compensation manually. Thank you.

  Hi Gonfry,

  I suggest you try the following steps.

  a. open the start menu by clicking on the button 'start '.
  b. click 'Run' If you are using Windows XP.
  c. Type "cmd" without the quotes. Press SHIFT + ENTER to run it as administrator on Windows Vista or later operating systems.
  d. d. Enter the command "nbtstat-r" without the quotes in the command prompt. Press ENTER to execute it. Your list of current connection NetBT is cleared.

• computer does not connect to the internet after reinstalling XP SP2 wit

  After that the computer we reinstalled windows XP with SP2.  The operating system loaded fine, but don't can't get the computer to connect to the internet.  Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started.  Any help would be appreciated.

  Hi DamonBrigham,
   
  -What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.
   
  -Do you have a cable or a wireless connection?
   
  If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.
   

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  See this link for instructions on the boot safe mode with networking:

  A description of the options to start in Windows XP Mode

• Unable to connect to the wifi of 5G

  My router has options of 2.4 G and 5 G, and my computer used to be connected to the 5 G option.

  I don't know what's happened and now only the 2.4 G appears on the list of network connections. My phone and my roommate's computer can connect to it probably isn't on the internet signal.

  I wonder what what could I do to fix it?

  Tried to reinstall only the network drive and it did not help

  Thank you!

  Hello

  To connect to a network that does not broadcast its network name, I suggest you to follow these steps and check if it helps.

  1. Open Manage Wireless Networks by clicking the start , and then click Control Panel. In the search box, type Wirelessand then click on manage wireless networks.

  2. Click Addand then click manually create a network profile.

  3. Type the network information.

  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.

  5. Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  The network will be added to your list of networks and will be available to connect to when your computer is in range of the network. To connect to the network, follow these steps:

  1. Open the connection to a network by clicking the network icon (or ) in the notification area.

  2. Click unnamed network, click connect, and then type the network information.

     The network will be added to your list of networks and will be available to connect in the future when your computer is in range of the network.

  Respond to us with the result, then we can help you further.

• SDK can not connect to the Simulator in VMware

  My operating system: Windows 7 64-bit

  SDK version: 10.0.9; Build id: v201212072306

  VMware Player Version: 5.0.1 build-894247

  Video card: NVIDIA GTX 560 Ti

  I'm trying to use the simulator of 10 BlackBerry, running in VMware Player, to test applications under development in the native BlackBerry SDK. However, when I try to run these applications from the SDK and connect to the Simulator, I see that even though (I think) I got the correctly configured IP address for the target, it is still listed as "Not connected" in the list of Options of the target (I don't know if this is normal or not). Then, if I try to launch the project in any case, I get the following error message:

  "Unable to connect. Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »

  Sorry if I didn't explain very clearly, this is very new to me, and I still have trouble getting my head around it. I'm sure there is probably some information that I forgot to include in this post, but I will provide if I think that whatever it is.

  I have been looking for solutions to the question, but it seems that there could be many possible causes, so I thought it would be better to make a new thread specifically for my situation. I tried the following:

  -Check that the development Mode has been activated (it seems that it has been enabled by default)

  -Ping I thought several times, was the IP address of the command line simulator (sometimes I had to meet with success, but not at the beginning)
  -Disabling Windows Firewall
  -Running a .bat file with 'ipconfig/release; ipconfig / renew. ipconfig/flushdns ".
  -I check the correct target for the Simulator IP address (double-check this confuses me a little, but I think I can find it in "Settings"-> "About" simulation-> 'Network' menu?)
  -Temporarily disable Avast! antivirus software to check if she is interfering
  -Verification of VMware Windows were running (I think he installed four of them in total)
  -Uninstall (then reboot) and reinstall the SDK, Simulator and VMware and restarting, repeatedly

  -Windows asked to troubleshoot the connection of VMnet8 of VMware; He said DHCP must be enabled, but then failed to do this for me (this left me confused; I wasn't sure if it was important or not)

  -Passage of the NAT VMware Bridged mode for the simulator mode, then the connectivity test (it doesn't seem to help, and the "About"-> page 'Network' in the simulation was empty), then power back up

  Any help or any what pointers to additional information, I would give, would be greatly appreciated. Thank you!

  EDIT: I also cant seem to get QML previews to work at all. I don't know if it is related to my other question, but I thought it might be worth mentioning, and this is something else I would try to fix, if possible. I tried to update my drivers, but to no avail.

  Solution found! I just tried to add a target in the software development kit using the IP address on 'Settings' of the Simulator-> "About"-> "Network" screen, but the target has been filtered out of the list, unless I unchecked "target filter based on the selection of C/C++ applications". If I unchecked, the target has been classified as ' 192.168.31.128 (Neutrino / x 86) ', but the Run button was grayed out when I chose it and I noticed the error message, ' binary Selected target do not match x 86 "at the top of the window." I have googled this error message and found the following (quite old) thread:

  http://supportforums.BlackBerry.com/T5/native-development/QNX-IDE-target-selected-binary-and-target-...

  After reading through and testing, it turns out that all I had to do was change the active configuration in the drop-down list at the top of the window SDK 'Device-Debug' for 'Simulator-Debug", little"hammer"that I needed to build to the Simulator and not a real physical BlackBerry device. Here is a quote from the post of cdamus, which is where I found the solution:

  "A little trick to streamline your workflow: prospects for development C/C++ has a little"hammer"toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or several projects."  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build. »

  I took a screenshot to help indicate the setting that I need to use:

  

  Hope this helps you chuma and anyone else who has this problem. Thanks for the tip, cdamus!

• Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

  HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

  I installed Windows 10 once again. After installing HP Support Assistant work.

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.