need to connect hp photosmart 5524 to mac 10.58

Similar Questions

• Need to connect MacPro to the router

  My Mac Pro is now connected to the internet via the airport card and the modem is down. But I need to connect a router on a mac so I can run my laserprinter through a network using a RJ45 cable. I can't run the cable in the area of the modem is located. Can I connect the router directly to Mac and use the card airport as the internet connection?

  Dbarunas,

  You left out some important details, but let me see if I can answer without them:

  Assuming that the ISP modem you mentioned is your current destination of wifi and Airport card is built-in wifi Mac Pro adapter.  I also guess your desktop not a laptop since you don't mention MacBookPro.

  1. If your router is wireless and assuming that the 'airport' is the the computer's built-in wifi card.

  (Wired connection) modem-> router (cable) * (wifi)-> laptop (wifi) (* printer cable) to connect to the router via wifi instead of the modem, then turning off the wifi on the once the router WiFi modem set up, if possible. (No need to nuke the family bits with too many signs wifi).

  2. If your router is not wireless.

  Modem-> laptop (wifi) * (wired)-> router (wired) (wired)-> printer (cable) (* make sure that the computer has not a gateway specified in the network settings for this connection assigned static address.)

  3. If your router is not wireless and no other host on the router. (without router required)

  Modem (wifi)-> laptop (wifi) (wired)-> * printer (cable) (static addresses the only, once again no gateway) (* this may require a crossover based on the capabilities of the printer Ethernet cable.)

  When you use a wired network on the laptop and wireless Internet access, make sure the "backend" network cable is on a completely different range of addresses and 'NO' gateway assigned or the laptop would not know how to get to the INET.

  Joe

• HP Photosmart C5200: need to connect the HP Photosmart C5200 printer to my mac 10.11.4

  I want to be apple to use my printer for my mac! How can I connect and that it work, wtc. Any help is apperciated.

  Greetings @angela_rose,

  Thank you access the Forums from HP Support for extra support! I see that you want to configure the printer on Mac. I will do my best to help you with this problem.

  The printer software is installed by the Apple updates. You should be able to simply connect the printer to the Mac through a USB cable and the Mac should automatically install the drivers for you.

  If not, then follow the steps in this document to install the printer: install a printer Mac driver by using Apple Software Update.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Using HP drivers seems not to recognize my photosmart 5524 and my mac turns 10.8.2 which is

  I'm Mac 10.8.2. Just replaced my printer with HP Photsmart 5524. The drive does not work as it does not recognize my system. When I try to get online HP drivers, it does not recognize the photosmart 5524 and offers no upodated software to download. Can I get the software update also? Or should I keep trying to download the disc that came with the printer and see what happens? Gillian

  Drivers listed in the HP Web site must be compatible and will help you to install the printer. However suggest you try to install the printer using the provided disks. Unplug the printer, and then run the disks, only when you receive a prompt to connect the printer to the computer using the USB connection or wireless and complete the entire upward. Link below will be a reference for you to download the latest driver easily for the printer from the HP website.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-103504-2&cc=us&DLC=en&LC=en&OS=219&product=5218822&sw_lang=

  Please update the State of the solution for assistance.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is from 2009 and a not a connection Thunderbolt... wouldn't I need a maid in the DVI male? Thank you!

  Hi, I have a macbook pro retina 15 "(mid-2015) and I would like to connect it to my I-mac to use as monitor." The i - mac is 2009 and a not a port Thunderbolt... wouldn't I need a love at male Cable DVI?

  Any help / advice would be much appreciated... Thank you!

  Your iMac has minidisplay port?  Here are the conditions:

  https://support.Apple.com/en-us/HT204592

  Ciao.

• HP Photosmart 5524: Server connection error 403

  Hello

  Can someone help me with the error message above, I keep getting when trying to scan to e-mail please?

  He was perfectly fine until last week.

  I tried to uninstall and reinstall the printer software/driver. I tried the email address and add it again. I tried to unplug the power supply and then plugging it again.

  It drives me crazy, please help

  Thank you

  Hey @newstar81,

  Welcome to the Forum from HP Support.

  I see that you are unable to scan to email with your HP Photosmart 5524 e-all-in-one printer.  I would like to help.  I have a few tips that could restore this functionality.

  When users encounter this type of problem, I recommend that they start from scratch with their configuration.  You can reset your wireless, webservices and scanning to E-mail settings is one fell swoop by the factory default restore * printer.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased.  For more information about custom addresses ePrint, click here.

  Here's how to fill this reset:

  • In your printer's front panel, press the key to
  • Touch tools
  • Touch restore to factory settings

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, tap the scan icon and enter the e-mail address you want to scan to.  Then, recover the PIN than you should automatically receive and complete your scan to contact the installer.  Ideally, if you are able to get this good service will be fully functional.

  Please let me know how the troubleshooting went by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Error creating HP Photosmart B109n wireless Mac

  I am trying to configure my B109n for wireless printing, but the installer crashes.     The printer is USB connected, but I want to move it to another part of the room.  I'm Runnin' OSX 10.9.2.

  Process: HP Setup Assistant [8324]

  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard

  ID: com.hp.SetupAssistant

  Version: 2.3.12 (2.3.12)

  Code type: X 86 (native)

  Parent process: launchd [163]

  Responsible for: HP Setup Assistant [8324]

  User ID: 501

  Date/time: 12:58:57.895 2014-04-02 + 0100

  OS version: Mac OS X 10.9.2 (13 C 64)

  Report Version: 11

  Anonymous UUID: CD4CC37E-A4CF-B07A-F990-87DC5CF774FD

  Sleep/wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  Run @selector (performContinue ACMCustomButton 0x3592b0 sender)

  Dyld error message:

  Symbol not found: _WirelessIsAvailable

  Referenced from: Hewlett-Packard/Applications / / * / HP Setup Assistant.app/Contents/Plugins/WiFi confirm Settings.WiFiPlugin/Contents/MacOS/WiFi confirm settings

  Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

  Hi PaulEich,

  Welcome to the HP forums!

  I see your message you have a Photosmart B109n you need to connect wirelessly to your Mac running 10.9. Absolutely, I'll do my best to help you with this!

  I think that the software fails is because it has not provided be used with OS 10.9. At this time, HP does not have software complete features, you will need to install it via the Apple updates. Which leads to the next question, how do I connect the printer to your wireless network. To do this, we need to connect the Mac to the printer to get setup things correctly

  Please follow this post that I did, that has worked for others, to get the printer connected to your wireless network. To restore the default settings of your printer network, please press the configuration option, then network, then restore default network, followed by Yes. So to print the Network Configuration page on your printer please follow the steps below:

  1. On the Control Panel, press the button ( ) next to Scan . The Scan/Wireless menu.

• I'm trying to connect my photosmart 2610 to a wireless network. Following the online instructions, I have

  I'm trying to connect my photosmart 26110 printer to my wireless home network. By following the online instructions, I find when I get to the network menu on the printer, I don't have a network configuration option. So now what?

  The printer is currently connects to a PC via USB. I want wirelessy this network printer for my Mac to print to it also.

  LAN means Local Area Network.  It comes to your home network.  WAN means Wide Area Network.  This is the port to connect to your service provider, or in other words, where the Verizon's Internet connection needs to connect.  It shouldn't be to hard to get the Macbock to install the printer on the network.  The document below will guide you in the process.  Let me know what happens.

  Install the software from the product under Mac OS X for a wired network connection (Ethernet)

• Photosmart 5524: 5524 Print Duplex

  Hi, I already bought HP Photosmart 5524. I had a problem with printing and double-sided scanning. After you print the first page, the printer pulls the page and it does not print. If I change manual double-sided printing option, the printer will work correctly.

  Hello, @marek30 - greetings!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you need to configure printing double-sided with your Photosmart printer.  Please follow the steps mentioned below and check:

  • Go to control panel - devices and printers.
  • Right-click on Photosmart 5524, then select 'printer properties '.
  • Select the tab "device settings".
  • Ensure that the "two-sided" is set to "Installed" rather than "Not installed" and save the settings.
  • Now, again give a right click on the printer icon and select "Print Options".
  • If a "Printing shortcuts" tab is available, select the option "Print on Both Sides" or «print double-sided (Duplex)»
  • If 'Print shortcut' is not available, click the "Layout", "Includes" or "Finishing tab", depending on which tab is displayed in your version of the driver.
  • Locate the "Print on Both Sides" or "duplex printing" menu or an option, then the option link or page flip depending on whether you want the document reads like a brochure or a Tablet and save the settings.

  That should do the trick. Let me know!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Photosmart 5524: MGP1CN1610AR update the Firmware on HP PhotoSmart 5524 on September 14, 2016 broke wireless printing

  I have a question which I believe is related to the MGP1CN1610AR firmware update that was released on September 14, 2016 and auto installed on my HP Photosmart 5524.  Since the update I can print is no longer my laptop Windows 10, or my iPhone with iOS 10.  I can, however, send an e-mail to my HPEPrint account and this shows with success - which proves that the printer is connected to the internet and WiFi.

  My network is provided by my BT HomeHub 5 with BT infinity.  The status of router, the printer displays intermittently as connected then disconnected.  This is since the update of the firmware.

  Is it possible to restore the firmware on the printer? OR is there a known solution to get my WiFi printing works again.

  Hi RTD_HPUser,

  Thank you for your answer!

  I'm glad you found a solution that worked for you. About the firmware, as long as the Web service is enabled, you can select the icon Web Services, settings, and then select printer Update, then the update is automatic, and turns off. This will prevent the firmware update on the printer.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• Photosmart 5524: Sweep ends only when go HP printer Asst. ; used to scan automatically

  Just for the last 2 weeks or so, when I go to scan a document to my computer with a Wi - Fi, the message ' computer does not, check network connection is displayed. I have virtue to solve the problem and the analysis, after going to the Printer Wizard, manage the scan of the computer, and then disable and then allowing once again the analysis to the action of the computer. Why is this and I go back to auto scan the prinetr again? Is this something to do with the recent Microsoft updates?

  Hey @Palmyra3,

  Welcome to the Forums of HP Support!
  
  I understand that you are not able to use systematically the "computer scan" function on your HP Photosmart 5524 e-all-in-one printer to your computer Windows 8.1. I would like to help you today with this problem of communication of intermittent scanning. Now, because you are able to go in and manually enable the option 'analysis of the computer' and it works fine (temporarily) we know that your software and drivers are correctly installed and that you have no such conflict of wireless communication. I think a background on your computer or a firewall program can cause the conflict of communication bidirectional scan.

  To solve this problem today can I please have you click here. When the page opens you will be taken to the paper Support HP for a computer"not found" or an error message "Connection error" message.

  The steps that I want you to pass by are going to be a little out of order that the document States. Please run through:

  Solution 5: Search for critical updates, hotfixes, and firmware:

  The only available for your printer update is update the firmware of the printer HP Photosmart 5520. If you click on the link provided you can upgrade the firmware for your printer and test again the front scan function.

  Solution 6: uninstall the software, run Disk Cleanup, turn off background programs, configure the firewall and then reinstall the software:
  

  Please start by step 4: turn off programs running in the background and again test the scan function. If everything works fine now that a program running on your computer background is at the origin of the conflict. You can leave your disabled if you want as the background programs. Programs on your computer will work fine, they just used automatically running in the background of your computer.

  If the problem persists, please browse: second step: delete unnecessary files and folders with disk cleanup, step 3: restart the computer, and fifth stage: Configure the firewall under Solution 6

  If the issue still persists, as the race through Solution 2: download a tool to fix the problem automatically

  Please let me know if the steps I have provided resolve your problem of communication of scan. Good luck!

• Connect an external player to mac mini

  I have a new mac mini. We have photos stored on an external hard drive. The component is a Lacie designed by F.A. Porsche.

  The port looks like a side of the u. What do I need to connect it to the mac mini so we can import our photos, or at least show?

  ۏ is - what the on in the upper right corner?

  It is a standard USB port on components

• Warning of Photosmart 5524 transport jam not clear paper jam

  My HP Photosmart 5524 seems to be in perfect working order but I can't move it beyond the 'Transport Jam' warning on screen.

  Have followed all the steps on the screen of the printer and the HP Web site.

  Mac OS x

  Running wireless printer.

  Thanks for any help.

  Hello @And1234 , welcome to the forums

  Check out the guide I posted below. If you have already tried all of the steps, please consider contacting HP directly to inquire about a replacement printer or a trade in option.

  A 'Transport Jam' Message displays for HP Photosmart 5520 e-all-in-one and HP Deskjet Ink Advantage 5520 e-all-in-One Printer Series

  Details of HP:
  If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada: click here.

  Best wishes

• cx047b: photosmart 5524

  Hello

  I had a few very ink for my printer and I pput them across properly.

  but now the screen is coming say one or cartirdges more seem to be missing or corrupted install or replace cartridges affected. It shows that the blue and black.

  Ive tried everything to get out them and clean the inside and re from my printer after 30 seconds or more. but it always comes up with the same message.

  can any help me I am in great need to get this printer I have paper work to print and everyone I know the printers is absent on Holiday or busy reallly

  Hi!, fkad123:

  Welcome to Forum!

  See this link... http://h30434.www3.HP.com/T5/LaserJet-printing/Photosmart-5524-Setup-problems-quot-use-Setup-cartridges/TD-p/2215315

  Or, try... http://support.HP.com/us-en/product/HP-Photosmart-5520-e-all-in-one-printer-series/5157533/model/5218821/troubleshooting/