connection of the controller

Similar Questions

• 1130 connects to the controller after the HREAP

  I had an AP connected to my controller 4402 performer 4.2.207 1130.  I went to the value of the HREAP access point and after that I applied the parameter HREAP, the AP restarted and will connect is the controller.

  This is the error message I receive on the controller.

  WARNING: invalid ID slot (255) to REAP - traceback =
  0x4F026C 0x4F0394 0x498B24 0x491DC4 0x4AAF90 0x48DAC4 0x48E35C 0x197630o REAP - traceback =

  The AP part number is AIR-LAP1131AG-A-K9.

  This access point is running without problem until I tried to change it to HREAP.

  Any suggestions on how I can retrieve this AP?

  Seth

  Looks like we're hitting the software bug CSCsj69497 but its 4.2.173 fixed to... (but we are short of 4.2.207)

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj69497

  Try upgrading the LWAPP AP to the last recovery image and let me know how it works for you!

  If the above has not resolved so more study... Please open a SR with us (TAC)...

  Concerning

  Surendra

• SceneBuilder and ChoiceBox: how to connect to the controller?

  Hello
  I started using the SceneBuilder - nice tool... but: I have a question about the ChoiceBox: I assigned a controller class to the AnchorPane (parent) and you want to find out what choice did in the choicebox. When I look at the selection of code in the Inspector: where I have to or can specify the method that is called in my controller: obviously not in the "drag and drop" or "keyboard" or "Rotation" or "swipe" selection. So, I tried the selection of 'Mouse' and used the entry "On mouse was released" to call a '#choiceBoxSelected' method in my controller that accepts a "MouseEvent". This seems to work but doesn't look like a good solution for me because the method is triggered whenever the mouse leaves the area of choicebox. In addition: How can I find out the value selected in this procedure?
  
  I read a lot of sample of javafx, but each of them create the dancer of scene graph and create the choicebox with an observableArrayList. Subsequently an anonymous ChangeListener is added as a listener... Is this the way how designed to use the box of choice in the context of the scene generator tool? There must be a more pleasant solution... I hope?
  
  Can you give me an example or explain how to use the constructor of the scene with the box of choice?
  
  Thank you
  Christoph

  Hello

  You simply add a fx:id to your ChoiceBox.
  Then in your controller initialize() method, you can access ChoiceBox.getSelectionModel () and saves your headphones with this object.

  If you are not familiar with connection to the code using fx:id have a look here:
  https://blogs.Oracle.com/jmxetc/entry/connecting_scenebuilder_edited_fxml_to

  Hope this helps,

  -daniel

  Published by: daniel on August 31, 2012 01:11
  [or possibly with ChoiceBox.valueProperty () - depending on what you want to achieve...]

  Published by: daniel on August 31, 2012 01:13

• Circuit of Simulink connection to the controller of LABview

  I try to use my LABview VI to control the switches in a Simulink model. I do not know how to accomplish this task, but right now I'm trying to establish a connection between the two.
  I have 2015 LABview and MATLAB 2011.
  After googling how to connect a LabVIEW Simulink model, I found the following:

  1 using the model Interface tool (MIT)

  2. using controls and Simulation tools to convert a LABVIEW Simulation Model

  1. I downloaded MIT and Veristrand and followed the steps in this link: http://zone.ni.com/reference/en-XX/help/374160A-01/vsmithelp/mit_convert_model_to_dll/
  But I do not know where to go to from there.  Most of the tutorials I found using the SIT

  2. the Simulink components are not recognized in LABVIEW and are just empty boxes.

  Question: What is the best way to connect with LABview Simulink model?

  Hello

  This seems closely related to it.

  The two methods can be used, but both methods require some considerations.

  For the model interface Toolkit, you need to mind what are the features you use. Please take a look at this.

  «In the Simulink software, you can convert models that use only a Solver step-size ordinary differential equation (ODE) in compiled templates fixed.» In addition, you must disable data logging in the application of Simulink software. »

  Please refer to the following as well.

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_from_mdl/

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/

  (the same that I linked above)

  http://zone.NI.com/reference/linksen-XX/help/374160B-01/vsmithelp/mit_models_mdl/

  http://zone.NI.com/reference/en-XX/help/374160B-01/vsmithelp/mit_convert_model_to_dll/

  (is the one you linked, I just want to bring the model must be a dll to work with the model Interface Toolkit)

  http://forums.NI.com/T5/LabVIEW/importing-MATLAB-model-file-to-LabVIEW/TD-p/883625

  (the message mentions the 'SIT', that is not the model Interface Toolkit)

  The last of them brings something about the method of Simulation of design by control &: the model must be a mdl file so that the converter of Simulation Model work.

  http://www.NI.com/white-paper/11281/en/

  (this link is LabVIEW 2012, but it is still valid on later versions)

  https://zone.NI.com/reference/en-XX/help/371894G-01/LVSIM/sim_simtrans/

  It will be useful.

  MATLAB^® and Simulink^® are registered trademarks of The MathWorks, Inc.

  Kind regards

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• Modbus/TCP connection to the controller of power Eurotherm EPack

  There are examples of how to connect to a power controller Eurotherm EPack a modbus/TCP connection?

  I downloaded the Modbus LabVIEW ni_lib_modbus_library library - 1.1.3.32.vip and installed using VIPM.

  However, I am not familiar with the Protocol modbus and terminology such as coils, keeping records.

  I can't even properly run examples for Modbus master and slave to this library :-(

  Most important for me now is just to read the value of the artwork process.

  "ITools" Eurotherm controller software provides information about something I think are an address of memory the value of process I want to read.

  However, I have no idea how to set the various parameters to get successfully connect and read the value of the process.

  Trying to solve my problem, I managed to have basic communication and engineering data conversion.

  Now I can read values of process as the power line frequency, voltage and others.

  Once you know, it's very simple (once you have the modbus library)

  Some things that remain unclear:

  -What values are 32-bit and 16-bit?

  -is the method of addressing identical for all parameters?

  -is it the same for reading and writing?

  I would like to be able to write the target value, for example.

  I'll contact the seller for these outstanding issues. The manual is not really clear (at least not for me). He mentions that some values may be treated differenly (they 16bits, but globally, so 5001 with a scale factor of 100 means actually 50.01 for example).

  See the attachment for reading cover base.

• The controller needs to have a good connection to the agent

  Hello
  I have the controller installed on my desktop, while the agents on linux servers. The network between the controller and the agent is slow (avg ping 160 ms).
  This will affect the GST I want to achieve. The connection between the Server Agent and app is very good.
  
  Thank you
  Prasanna

  The connection between the controller and the agent will not affect not the GST you are trying to achieve - what is affected by the connection between the proxy server and app that you say is very good. As JB says, the scripts will need to be downloaded as well as the databases of the controller to the agents at the beginning of the test. Also, keep in mind that response time data must be sent to the agent periodically during the test controller, and the network publishes can result in "orphaned" agents, i.e. agents that are unresponsive to the controller and, therefore, the controller does not test the agent data.

  See you soon,.
  Jamie

• Event ID 11: the driver has detected an error in the controller on \Device\Harddisk2\DR11.

  My event log is loaded with these on a system just to receive Dell 15-Sep and I don't know why.

  Do not ask questions - yet.

  I would like to know how to solve this, please. Thank you!

  Hello

  Have you connected external hard drive to the computer?

  In almost all cases, these messages are due to hardware problems. The source can be the controller or (more probably) a (drive 2) device that is connected to the controller. The problem of equipment may be termination rate settings, bad wiring or incorrect transfer, a defective unit, or in rare cases, a bad device driver written.

  Run the troubleshooter.

  Troubleshooting Windows

  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-in-Windows

  You can also check this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-64bit-USB-problem/b9eb5cfe-0036-45ef-b7f0-36c973398f49

  As it is a new computer, I suggest you contact the manufacturer of the computer.

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• Error when connecting to the domain controller

  In the logon window, the error message is "cannot connect to the domain either because the domain controller is down or unavailable your computer account has not been found."

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Unable to connect to the internet, NVIDIA nForce Networking Controller issues

  The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.

  In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.

  You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.

• I have a controller wireless xbox connected to my pc with a charging cable cable that connects to the front, middle, my pc will not recognize to use

  subject, I want to play games on my pc with my xbox controller, it is a wireless controller, but I have a cable that connects to my controller and a usb port on the other end that connects to my pc, my pc does not recognise to use... what I do

  Hello

  The question you have posted is related to the Xbox and would be better suited to the Xbox community. Please visit the link below to find a community that will provide support to ask you:

  http://support.Xbox.com/en-GB/

• Xbox controller will not connect to the xbox wireless receiver?

  I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

  Hello

  Welcome to the Microsoft community.

  Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

  Have you tried to use the controller on a different computer?

  You can see the steps from the following link and check if it works:

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  Reference:

  http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

  You can also contact Xbox support team for assistance:

  http://support.Xbox.com/en-us/contact-us?XR=footnav

  It will be useful.

  If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.