Connection of the user to ger?

Similar Questions

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Establish the VPN connection before the user logged

  Hello world!

  Anyone know if it is possible to run the cisco vpn client and establish the vpn connection before the user logs (Windows 7)? How?

  Thanks in advance!

  You must Anyconnect VPN.

  use start before logon feature you can get the VPN before windows logon.

  There are a lot of configuration guide that you can find in CISOC regarding anyconnect SBL.

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• How to connect to the user: virtue in sqldeveloper sysdba system? I know how in sqlplus.

  I was wondering how you do it using the wizard/interface to specify the configurations for a NEW connection.

  It comes as I get b/c I don't know where or how put '\as sysdba' in the NEW connection, that I am creating with success.  I can do very well with just to connect to the user: System, but not sysdba \as!

  Login name: system_connection_as_sysdba

  Username: System

  Password: [password here]

  Host name: Localhost

  Port: 1521

  SID: orcl

  Developer SQL has a drop down separate called 'Role', where you can select SYSDBA instead of default.

• Failed to connect to the user when it connects to SQL Server 2008 R2 gateway

  Hi - This is my first post!

  I have problems to connect to a SQL Server 2008 R2 to Oracle database 11 g R2 database, use the product of the gateway.

  Previously, he has worked, but we moved the database SQL 2005 to 2008 (R2).

  We receive this error while trying to query through the link (Select * FROM DUAL@ADSRD)

  ORA-01017: name of user and password invalid. connection refused

  [Oracle] [ODBC SQL Server driver] [SQL Server] Failed to connect to the user 'SQLUSER '. {NativeErr 28000, = 18456} [Oracle] [ODBC SQL Server driver] Invalid connection string attribute {01 S 00}

  ORA-02063: preceding 2 lines of ADSRD

  01017 00000 - "invalid username/password; connection refused '.

  * Cause:

  * Action:

  Error on line: 1 column: 35

  The DG4MSQL configuration is here:

  HS_FDS_CONNECT_INFO = //SSU_PRD_APP/IntegrationStagingDb [BSYS-sql2]

  HS_FDS_TRACE_LEVEL = OFF

  HD_TRANSACTION_MODEL = READ_ONLY

  #HS_FDS_DELAYED_OPEN = FALSE

  HS_FDS_FETCH_ROWS = 100

  HS_OPEN_CURSORS = 50

  
  

  The database is hosted in its own instance on the sql2-BSYS Server

  Then... on the SQL Server event logs returns this:

  Failed to connect to the user 'SQLUSER '. Reason: Failed to try to connect using SQL authentication. Server is configured for Windows authentication only. [CLIENT: 192.168.10.179]

  However, the SQL Instance IS configured to enable mixed mode authentication.

  I can't work on what I missed, and I can confirm if I'm actually to a compatibility issue between the gateway and the version of SQL server, that we are now trying to connect.

  Help please!

  Is the user name in your SQL Server database in the capital, mixed mode letters or small letters?

  Currently, you have created a database link that tries to authenticate on the server SQL using SQLUSER in capital letters. If you use mixed or small letters, so be sure to write the user name (and password) as it is in the create database link statement and surround it with double quotes.

  If you have created the link of database correctly, try an ODBC connection for example from your client and add the user name and password. Does it work?

  -Klaus

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• Enable and disable the buttons depends on the connection of the user?

  How to enable and disable the buttons depends on the connection of the user?
  
  In fact I have a few buttons as remove, add, save, exit, it etc., zero page...
  
  depends on the user , I have to turn on and off specific keys.
  
  
  Thanks and respect,
  SKUD.

  Hi Skud,

  In fact Jeff's response are correct and handles the problem. I want to mention another way,

  Change the desired button > navigate to Conditions > Pick (exists SQL query returns at least one row) > Expression 1, enter code similar to the following:

  Select TOP (: app_user) where double UPPER(:app_user) in ('FATEH","MARY")

  Best wishes
  Fateh

• Cannot connect to the user account

  Hello

  I have a Mac Mini end of 2012 running OXS El Capitan, while downloading the movies I did spill over from my hard drive, while this isn't a problem in itself when I restarted I am able to connect to my user accounts.

  Specifically what I see, this is the option normal user with the available accounts login screen - I select a configured account (I have 2 of them) enter the word of past (rightly), then instead enter the account, I get the login screen again.

  Strangely enough, when I select the guest account, I can get in.

  Any ideas how do past this and on the accounts?

  I tried to reset the NVRAM that allowed me to access disks and do first aid, it has not shown any questions or help, unfortunately.

  I have access to the Mac using a Windows PC, which allowed me to make space on the hard disk drive by removing some of the movies.

  Thank you very much

  Keith M

  Try to start in safe mode and then open a session and try to delete files to free up disk space.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Problem with the configuration of the Office during connection of the user to the domain

  When the user tries to connect with his domain user name, the down payment is suddenly different from the first, the desktop icon disappear and prospects must be set up in the beginning, what is happening with this? someone at - it a problem?

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Second slow internet connection of the user

  Hello

  I'm having a problem with the user accounts on my computer.
  Recently, I decided to use the second user account I had, as my main so I made this account administrator. This is because the first main user that was admin had some problems with loading upward (would say that it was not loaded correctly, and after a search on this problem, I thought that this user has been altered) so after the second admin user, I moved all my files etc. However, although the second user account works fine, Internet connection takes awhile to load when I login to it and Internet browsing is much slower than the navigation, I experience on the other account.
  I have not deleted the first user account (which now is not admin), but I'm not on it.
  Someone could think of any reason why this could happen? This is because the former user still exists?  Or could it be something to do with the start-up on the second user programs?
  Any help would be appreciated.
  Thank you

  Hello

  Step 1: I suggest you to check the problem in safe mode with network.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Note: The advanced startup options, select Safe mode with network.
  Step 2: If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.
  I hope this helps.

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• Cannot connect to the user profile

  When I try to log on to my account on the computer at home, it doesn't let me, saying that "the service user profile Service does not log. User profile cannot be loaded. "I had problems loging a few weeks that I connect and keep getting on a temporary profile, but this has happened in the last two days. All other profiles work on the computer without any problem.
  Any help will be greatly appreciated

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• Connection failure: ' the user profile Service service failed to connect. User profile cannot be loaded. »

  I'm trying to log on to my account on my laptop, and whenever I try to connect it says

  "The service user profile Service could not connect.

  User profile cannot be loaded. »

  Is it possible that I can fix this or make this standard account administer?

  (If someone can answer, could you please try and explain as simple as possible, thank you)

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account
  in Safe Mode has no default password (so unless someone has changed the password for it)
  should be available).

  Some programs such as the Google update (if you added the toolbar Google, Chrome or)
  Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7 computer
  by using a temporary profile: "the user profile Service has no logon. Profile of user cannot
  being responsible.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected
  with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">