connection problems with wireless devices

Similar Questions

• 871W wired connect/ping with wireless devices

  Hello

  I have a 871W giving me fits.  I've been troubleshooting this for some days now and may not know what I am doing wrong.  My wired clients cannot communicate with wireless devices.  My wireless devices are unable to communicate with each other.  However, my wireless devices CAN connect to a wired device!  I know because I have a local webmail server on the side wired can be achieved wireless.  All devices, wired and wireless, are on VLAN 1, which is be the only vlan configured.

  My configuration file properly disinfected is attached.

  When I try to ping from a wired device to a wireless device, I get the following error:

  ~ $ ping 172.27.44.27
  PING 172.27.44.27 (172.27.44.27) 56 (84) bytes of data.
  From 172.27.44.3 icmp_seq = 1 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 2 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 3 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 4 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 5 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 6 Destination Host Unreachable

  -172.27.44.27 - ping statistics
  8 packets transmitted, 0 received, + 6 errors, 100% of time packet loss 7051ms
  pipe 3

  ~$

  Wireless devices simply timeout trying to ping each other.

  Thank you for your help.

  Chris

  Is there a firewall on the host wireless?

  Do you have wiresharked any traffic to see if it is to hit the dest host?

  Look at the config looks ok. Some additional ACL that I've not seen it used is here.

  Can ping wireless and wired a public IP address?

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• Cannot add HP8600 on my desktop, but not problems with wireless devices

  Summary: How do I enter my HP8600 that is connected wireless to a router from a computer that is connected to the router by ethernet cable?

  Description: My HP8600 is in a room in my house.  It is connected wireless to a linksys EA6500 router.  I have no problem setting upward and printing on any device or portable computers that connect wirelessly.  However, I have a desktop computer that is connected to the router via an ethernet cable.  How to use the HP8600 as a printer for my office?

  System information:

  Printer: HP8600

  Router: EA6500 Linksys

  Desktop: Windows XP

  I thought that I could add the printer by setting the static ip address when I try to add the printer and "Connect to this printer"... but he never finds this printer.

  Any help is appreciated, thank you in advance.

  Hello

  Looks like you want to connect to something like the following picture:

  

  Please consult the following manual and set them for your printer:

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Problems with wireless connection in Windows

  I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
  OT: Network network adapter Ethernet NIC wireless networking device

  Hello

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• Problem with recording devices and call issues

  Until recently I had a few problems with my microphone on Skype. Whenever I start my PC, everything will be fine, but every time I change the microphone source (from my webcam for stereo mix so I can play sounds in calls) and leave the call, I get weird questions. First if I still have the stereo mix as the source micro fine, but if I change it to my micro webcam when I click on answer call nothing happens and if I call someone it won't fail to connect and it will say: problem with the device registration, which is strange because it has nothing to do with the connection. Also if I change the source to microphone during a call, the call will be disconnected as if I turned on the internet and post something about the sound card errors. Can anyone help?

  I found the problem, clown fish was not working with Skype and it ceased to use the microphone and I thought since I had removed so I don't think that was the problem, but for some reason any, it is been installed, in any case I removed it and now Skype works fine.

• Big problems with USB devices

  Since I upgraded to El Capitan I have several, serious problems with USB devices:

  1 USB hard drive: everything by watching a video from an external hard drive, the hard drive will be to disassemble all the minutes, the video will be of course hang and it takes 45-60 seconds until the drive reconnects. I also can not boot from any external hard drive more. Booting from a USB key works fine.

  2. I can't transfer my Sunny BT11 of beam data more. The Sunny Beam is a device that records the data of my photovoltaic plant. The overview of the system he sees when connected via USB, however he is not recognized and so I can't transfer data files. Also, it makes not a difference if it is connected via a USB hub or directly, the two versions do NOT work. In the Finder preferences, all devices are controlled to display on the desktop.

  The two scenarios always perfectly work with my Mac mini that has not been updated and uses Mac OS X 10.10.

  Hello Gulliver,

  It seems that if you live with loss of connection of your USB devices since the installation of Mac OS X 10.11 El Capitan, is that correct?

  I suggest that you are troubleshooting by following the steps in this article - OS X El Capitan: If a USB device does not work

  Thank you for using communities of Apple Support.

  Sincerely.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I had to reinstall my windows OS and now I can't connect to a wireless device, tells me that it cannot detect any wireless network hardware

  original title: Wireless help network device

  Help, please. I had to reinstall my windows OS and now I can't connect to my wireless device. When I try it tells me that it cannot detect any wireless network hardware. I am currently connected via my laptop air card. Please help me to find and correct the problem.

  Have you installed all of the correct drivers?