Connection to a printer via Bluetooth

Similar Questions

• We can connect HP1000 J110 printer via bluetooth

  We can connect HP1000 J110 printer via bluetooth

  No,

  The printer is a USB printer only.

  You can find the specifications of Connevtivity below:

  http://support.HP.com/us-en/document/c02231304

  Shlomi

• Satellite C660 now does not connect to the printer via Bluetooth

  I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

  Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

  Any ideas of solution?

  Hello

  From this point it's hard to say what's wrong.
  In my opinion, you must reset all settings and configure the connection to the printer again.
  Reinstall the software that you have installed in the past.
  Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

  Since your laptop can connect to the internet properly, it cannot be a laptop problem

• 7780 all in one print via bluetooth from a PC Windows 7, but not the other

  • Our HP 7780 all in one printer is connected to the network via bluetooth and has an ip address of http://192.168.1.65. A Mac and a Windows 7 desktop computer can print on it. An another Windows 7 laptop USED to be able to print, but no longer can, although it can browse to it and see the ink levels.
  • After restarting, the printer status says ready and a new print job appears in the queue, but after a bit it turns into error and never print.
  • We downloaded the base driver and reinstalled. During the installation of the 7780 was on the list of discovered printers and we chose, but during the installation, we got an error message that it could not find the printer.
  • Later we downloaded and installed the patch titled that product stops printing after network installed on Windows 7 (64 bit), rebooted and still the same error.
  • Help! How to be able to print the new Windows 7 laptop!

  The problem was McAfee firewall. First I disabled it, and print worked. Then I restored the default settings of the firewall and print continued to work.

• Satellite A200 - cannot connect my mobile phone via Bluetooth

  I have the satellite A200 that came with Vista - I have upgraded to Windows 7. I tried for a few days to connect my new Nokia mobile to my laptop using bluetooth, but may not operate at all.

  The phone is OK as I have to connect it to my previous mobile via bluetooth. A few months ago, I had to do a restore system using the Toshiba drive - is it possible that this could have affected the availability of bluetooth?

  Any advice would be welcome - especially if someone can explain what it is I should do in a non-technical way. Thank you in advance.

  Question is: have you installed all the discs properly?
  You can activate the BT module using the FN + F8 key combination.

  I can't say for sure, but I assume that your BT in A200 camera is not correctly enabled.

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

  Hello

  My problem is as follows:

  Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

  Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

  I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

  "

  Error

  A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

  If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

  I tried the original shipped with the printer CD, it gives the same error message.

  If anyone can help I will be very grateful. Thank you!

  Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.

• HP Photosmart 7525 PC connect to the printer via the wired network

  I install the 1 desktop computer printer that connects my wireless router with a cable, ethernet and 3 wireless laptops.  My main pc is the office.  During installation, the only options are to connect wirelessly or via USB.   When I select USB, the installer said I can't use all the features by using the USB.  Is it possible to install the printer with my desktop computer connected to my router via an ethernet cable?

  jconti01 wrote:

  .....  Is it possible to install the printer with my desktop computer connected to my router via an ethernet cable?

  Hello

  The answer is YES, you can connect like the following picture:

  

  Please see the following document:

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• How to make/receive the phone call from a laptop connected to the smartphone via bluetooth?

  Dear community of Microsoft,

  I have a smartphone (Samsung SCH-I759) which I want to connect to a laptop running Windows 7 Professional, then I could make/receive the phone call on the cell phone.

  After browse around, I saw several methods to do are pretty simple. Activate bluetooth on both devices connect, match and set - the bluetooth device menu.

  When I followed these instructions, I was able to pair the devices but the ability to use the bluetooth connected as a phone smartphone does not appear. Instead, I have less accessible services in the menu. Here is the screenshot:

  

  For those who have been successfully pair and use their laptops as phone, would you care to share the how-to?

  Thank you

  NALA Jati

  It depends on the abilities programmed into your phone. Your photo, I can say that is not possible on your phone, then you will not be able to do.

  If you want to make/receive calls on your computer, you could try to use Skype or Google Voice.

• Computer cannot connect to the printer via the local network

  I have two computers sharing a printer, the printer is connected with USB is Vista Home Premium 32-bit. The other which must be connected wireless is old computer Windows 7 Home Premium.My, I suppose his ultimate, I'm not sure tho, that works fine with the printer. This Home Premium one just can not connect to the printer. It keeps saying can't find a print reader, I downloaded a universal driver HP that I learned other positions, and he said that it was not a correct driver.

  I asked our technical support to help me. And he told me that Home Premium has this problem. The only way I can solve this is to update my system at least pro. I checked online but I have not seen someone talked about this. Just make sure that is it true? If not, what can do now?
  Thank you very much.

  Hello

  -What is the brand and model of the printer?

  This isn't a problem with different versions of Windows support network printer.

  I suggest you go through the following links and check if it helps.

  Network printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

  Note: The steps are also applicable to Windows 7.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  Let us know the result once you have tried the steps mentioned in the link.

• Why am I considered the possibility of adding my phone to my printer via bluetooth while he was trying to set up my printer via wifi?

  WHY I WANT TO CONNECT MY PHONE (BLUETOOTH) TO MY NETWORK, WIFI PRINTER?

  I'M TRYING TO CONNECT MY PRINTER TO MY LAPTOP WIFI AND WHEN I TROUBLESHOOT IT, SHE ALSO ASKED ME IF I WANTED TO ADD ONE ANY BLUETOOTH DEVICE.  WHY WOULD I WANT TO ADD MY PHONE TO MY PRINTER?

  Its generalization, the meaning if there are other devices on your network, you want to add to your network.

  There are two main types of network printers: Wi - Fi and wireless.

  • Printer cable equipped with an Ethernet port to which you connect to your router or hub via an Ethernet cable.

  • Wireless printers normally connect to your home network using a Wi - Fi or Bluetooth technology connection.

  Some printers offer both options. The instructions provided with your device should tell you exactly how to install it.

  To install a network, wireless or Bluetooth printer connection

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a network, wireless or Bluetooth printer.

  4. In the list of available printers, select the one you want to use, and then click Next.

  5. If prompted, install the printer driver on your computer by clicking on install driver. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • Make sure that you are allowed to use these printers before adding them to the computer.

     • You can confirm that the printer is working by printing a test page. For more information, see print a test page.

• Satellite L30: Connection to a printer via USB Windows XP

  Hi all

  I'm trying to connect my printer (Brother MFC 9070) to my Satellite L30 and it does not work. Can I use the USB interface to connect the printer to the laptop under XP? I've read that USB can be used to connect the printer to Mac OS, but if not, how should I connect the printer as good old parallel interfaces do not exist on the new mobile no more? Who can help?

  Thank you!
  Dieter

  Hello

  Please check this similar topic about connecting printer parallel to the computer via the USB interface.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17425

  In this topic, Jeffrey suggested that it s a good idea to test the USB-parallel adapter > before buying because not each adapter will not work.

• Connection app to print via wifi Android Tablet for printer HP Officejet 5740

  I have trouble getting the application "All in one remote control HP" to recognize my printer when connected via wifi. I have no trouble getting the 'HP eprint' app to work. I want to use the previous application as it scans and prints. Also how to print wireless an article on the web when you use Google's browser or even save it to a download to print later. I'm old so need help please

  Cariad says:
  

  Yes. He says DIRECT then the name of the printer

  Hello

  Yes, that means that it is there, is it connected ? If not, you need to set up to enter a pin code which is located on the printer control panel.

  Kind regards.

• BlackBerry Smartphones BlackBerry Bold 990 is no longer connects to the desktop via Bluetooth (Version 7.1 Bundle 1646) software

  I've always been able to sync my Bold 9900 using the desktop via a Bluetooth connection software.

  Yesterday I updated to 7.1 Bundle 1646 and Desktop software is no longer recognizes the Bluetooth connection

  My "BOLD" can still associate it with my computer (i.e... I can play my music from my Bold 9900 via my computer) and my computer and the Bold 9900 have indicated that they are paired/connected.  However, the desktop software does not have a Bluetooth with my Bold 9900.

  I tried to manually add the device to the desktop through 'tools' software > 'Add Bluetooth device' but my Bold 9900 is not displayed even by selecting 'Add '.

  Now, I have to synchronize by using the USB connection.  I would go back to the use of the Bluetooth connection.

  Thoughts?

  Information:

  Bold 9900 - Version 7.1 Bundle 1646

  Desktop computer - Version 710_b033

  HP ProBook s 4530 - widows 7

  If RIM has released a new version of the desktop (v7.1 bundle 2108) and BB verisions.  I've updated and now it works!