Connection to the Simulator takes ten attempts to work

Similar Questions

• By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later

  By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later. " See the image below.

  Note that while I am able to get the email, do some research on the Internet, etc., that the update itself seems to be the culprit the disconnection of Internet while performing the check.  I closed all applications and even rebooted the IPad and then tried to run the update, but still get the same message.  Any other suggestions?

  Thank you in advance for your help!

  

  I'm having this problem too.

• SDK can not connect to the Simulator in VMware

  My operating system: Windows 7 64-bit

  SDK version: 10.0.9; Build id: v201212072306

  VMware Player Version: 5.0.1 build-894247

  Video card: NVIDIA GTX 560 Ti

  I'm trying to use the simulator of 10 BlackBerry, running in VMware Player, to test applications under development in the native BlackBerry SDK. However, when I try to run these applications from the SDK and connect to the Simulator, I see that even though (I think) I got the correctly configured IP address for the target, it is still listed as "Not connected" in the list of Options of the target (I don't know if this is normal or not). Then, if I try to launch the project in any case, I get the following error message:

  "Unable to connect. Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »

  Sorry if I didn't explain very clearly, this is very new to me, and I still have trouble getting my head around it. I'm sure there is probably some information that I forgot to include in this post, but I will provide if I think that whatever it is.

  I have been looking for solutions to the question, but it seems that there could be many possible causes, so I thought it would be better to make a new thread specifically for my situation. I tried the following:

  -Check that the development Mode has been activated (it seems that it has been enabled by default)

  -Ping I thought several times, was the IP address of the command line simulator (sometimes I had to meet with success, but not at the beginning)
  -Disabling Windows Firewall
  -Running a .bat file with 'ipconfig/release; ipconfig / renew. ipconfig/flushdns ".
  -I check the correct target for the Simulator IP address (double-check this confuses me a little, but I think I can find it in "Settings"-> "About" simulation-> 'Network' menu?)
  -Temporarily disable Avast! antivirus software to check if she is interfering
  -Verification of VMware Windows were running (I think he installed four of them in total)
  -Uninstall (then reboot) and reinstall the SDK, Simulator and VMware and restarting, repeatedly

  -Windows asked to troubleshoot the connection of VMnet8 of VMware; He said DHCP must be enabled, but then failed to do this for me (this left me confused; I wasn't sure if it was important or not)

  -Passage of the NAT VMware Bridged mode for the simulator mode, then the connectivity test (it doesn't seem to help, and the "About"-> page 'Network' in the simulation was empty), then power back up

  Any help or any what pointers to additional information, I would give, would be greatly appreciated. Thank you!

  EDIT: I also cant seem to get QML previews to work at all. I don't know if it is related to my other question, but I thought it might be worth mentioning, and this is something else I would try to fix, if possible. I tried to update my drivers, but to no avail.

  Solution found! I just tried to add a target in the software development kit using the IP address on 'Settings' of the Simulator-> "About"-> "Network" screen, but the target has been filtered out of the list, unless I unchecked "target filter based on the selection of C/C++ applications". If I unchecked, the target has been classified as ' 192.168.31.128 (Neutrino / x 86) ', but the Run button was grayed out when I chose it and I noticed the error message, ' binary Selected target do not match x 86 "at the top of the window." I have googled this error message and found the following (quite old) thread:

  http://supportforums.BlackBerry.com/T5/native-development/QNX-IDE-target-selected-binary-and-target-...

  After reading through and testing, it turns out that all I had to do was change the active configuration in the drop-down list at the top of the window SDK 'Device-Debug' for 'Simulator-Debug", little"hammer"that I needed to build to the Simulator and not a real physical BlackBerry device. Here is a quote from the post of cdamus, which is where I found the solution:

  "A little trick to streamline your workflow: prospects for development C/C++ has a little"hammer"toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or several projects."  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build. »

  I took a screenshot to help indicate the setting that I need to use:

  

  Hope this helps you chuma and anyone else who has this problem. Thanks for the tip, cdamus!

• Unable to connect to the Simulator (169.254.0.1)

  I installed the new Simulator available for VMware Player and have successfully startet it. (Windows 7)

  The Simulator have internet access (I launched a web page in the browser)

  But I can't connect to the device either by ping it in cmd command prompt or the

  plugin in eclipse.

  It is said in the Simulator: use development mode ON and development addresses 169.254.0.1

  Any ideas?

  The value in the security setting is the IP address that will be used when a PlayBook is connected via USB.  You can connect the debugger using the WiFi IP address or IP address of the USB device.

  In the case of the Simulator, the USB connection is not possible if you need to connect using the simulated WiFi connection.

  The icon on the home screen shows all of the IP addresses, you can use to connect to (it will show WiFi and USB IP addresses if both are available).

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Depending on your mobilde device you must first unlock the developer settings in order to test the AIR apps on it.

  Where to find these settings depends on your specific device.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• Unable to connect to the Simulator for debugging

  For some reason I can't connect to my Simulator debug. I can run my project, but when the debugging console says "pending connection on port 5768" and never makes a connection. I have tried to resolve this but couldn't find an answer

  I looked at the documentation for the developer, but he said nothing about it.

  It's very strange. Just out of curiosity, trying to put development power off mode, then running, but this time choose a different IP address. Then add back to Momentics and try to run again.

• Socket connection in the Simulator with MDS, but not on the curve

  Hello

  Working on an application using socket connections.

  SOC = (SocketConnectionEnhanced) Connector.open ("socket: / /" + address.ip_number + ":" + address.port_number + ";") deviceside = true");

  Proceed to use a DataInputStream and DataOutputStream to communicate.

  The server works, can transmit very well with the Simulator, but also another curve (not same model). (There is a small chance that deviceside = true has not been passed as a parameter when we tested on the curve, which would go through BES? This is probably still there however).

  IMHO, this means the places that the question could be one) how the code is implemented on the client phone or b) phones or their settings (have 4 curve 8530 s on the same CDMA network).

  -These phones have already activated in the last days, is there the chances that something is missing from the service book to allow socket connections? (I doubt that what I downloaded messenger ping I assume uses taken... and everything is fine).

  No authorization application that I put?

  Ideas! Please let your mind flow. Thank you!

  To all those who might find this thread after encountering the same problem:

  The issue was with the DataInputStream... available() was ALWAYS return zero, even if there are more bytes to read. This is our 8530 s curve 4 tests phones. Tried on another curve and "BOLD" and they did not have this problem.

  Use available() stopped and tried reading for much bigger than one of our packages will be (5000 bytes).

  Have some phones to test with 5.0.0.337 that they would not work with that.

  After the 5.0.0.1000 they all work perfectly.

  I read somewhere that the available() issue has to do with J2SE-> J2ME problems, something on a wrapper. This problem exists (or existed) with TSL/SSL apparently (sorry I can't find the thread I get this info, if someone really wants to see him answer and I'll get the link in the history of my browser of laptops).

  Hope this helps someone!

  B

• BB10 Simulator. Unable to connect to the Simulator.

  My app works on BB Playbook, but I want to assure you that it will also be the BB 10.

  Unfortunately, flash builder is unable to discover the Simulator and connection manually by typing ip of the sim also does not work.

  Controller app, which comes with the sim card, is unable to discover and connect to the SIM too.
  The mode of development. I tried to reinstall the Simulator, but it did not help.

  Does anyone have this problem?

  I solved this problem by uninstalling VMware workstation and install VMware Player instead.

• Connect to the Simulator 0.9.2?

  Hello, I'm under the blackberry tablet Simulator v0.9.2. How can I connect to it to view its contents of file? FTP/SSH/SCP? I tried to connect to the FTP and SCP using root under the user name and password as password developer.

  I have a connection has expired, a refused connection, or a "pending Welcome Message" which leads to a connection timed out.

  The main reason that I want to connect to the Tablet is to view the contents of the user directory to see if my application is properly made pictures.

  How can I connect to it?

  Thank you

  Noah NAKED

  BB announced the layout of the probable case on the PB here.  You probably want to place the image in one of the shared folders.

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-AIR/application-sandbox-file-system-l...

• I read all the steps to correct the problem that my iPhone cannot connect to the iTunes Store, but still nothing worked if you know one

  my iPhone is running on iOS 9.0.1 5s and I have not upgraded my phone to the latest version because last time when I've upgraded to the latest version of iOS 9. I met a major problem. Was my opinion bar stucked half screen that leaves me unable to do anything on the screen. I tried to turn off but turn off the logo has not changed leaving me very frustrated and finally after waiting for a long time, until my battery, I have finally got rid of this issue. But now a new problem of unable to connect to iTunes Store has highlighted and with to my surprise I'm not new to the problem. Hope you could do something apart from the measures to solve the problem because it did not work. Please do not suggest that you should upgrade to the latest version

  Is there an error or a message when you try to connect to the iTunes Store?

  What have you already tried? Reboot? Reset?

• I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

  I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

  Hi wildcar

  You can go directly to Windows XP SP3 . Download and install it from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the text that says: it is only intended for Professional computer and network facilities.

  Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

  Update for Windows XP (KB953356)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

  After you are done you can try to install ie8 again, if it has not already been offered through windows update.

• Need help, connect to the wifi and Panel set to work.

  Let me start by saying that I recently downloaded malware bytes and microsoft security essentials. Malware found 4 corrupted files. I deleted the and also received a warning that the files needed to restore. I restarted the computer and then I realized that the computer wouldn't connect to the Internet wirelessly. There is no any wifi connection possible. I tried to access the firewall via the Control Panel, but I received a message saying that something is misspelled, and I needed to check my spelling and try again. I can't access anything in the control panel. I then returned to malicious software and restored the files and I don't know if it restored. Again, I have no wireless connections and cannot use Control Panel. I did a restore there when I knew that nothing was wrong with her, but he says that there is no change for a week about a week ago. I need help!

  What are the 'properties' can you get not to?

  If you were not able to see something like this picture--> http://www.askdavetaylor.com/4-blog-pics/windows-system-properties.jpg

  or you have to this Properties dialog box, but the part of the circle includes all mention of the Service Pack,

  Then, it's probably time for you to go to a good independent store (place of type no BigBoxStoreUSA or geeksquad) computer repair.  If they think they can reinstall Windows, ask them to back up your data (files, photos, music) first.  Ask them to tell you the consequences of reinstalling Windows before they do.

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.