Connections of the agent through a firewall

I have a number of windows servers in a DMZ I need to monitor, and I can't push the holes for each server. I have a server in the DMZ that can communicate back through the firewall. Is there a way to put the agents on these computers to communicate through a server which has a connectivity? I can put whatever I want (server, agent, etc.) on a server, but I need the results to finish on the server inside the firewall.

I would not put the agents to the same port - I would like to use different.

You say you have "too much", but there are 65 535 ports without overlap. Indeed I would be impressed if you had that many. :)

Tags: VMware

Similar Questions

Unable to connect to the agent

And another question :-(
Enterprise manager cannot connect to any remote agent.
He notes:
SERV01.localdomain unable to connect to the agent at https://DBSERV01.localdomain:3872/emd/hand / [No route to host]
If connect you to the address via firefox:
Access to Firefox:
EMAgent 12.1.0.4.0
Congratulations, EMAgent work!

If I try to connect to the url of the agent from the server on which GRID is running:
wget - No.-check-certificate https://192.168.146.130:3872/emd/hand /
"" WARNUNG: Kann das Zertifikat von "192.168.146.130"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.
Ein signiertes selbst Zertifikat found.
"WARNUNG: certificate requested host name does not match the common name ' SRVB01.localdomain ' ' 192.168.146.130 '. '.

Edit: I have re-released the comand and replaced ip number with the correct host name - the warning about the corresponding certificate not came yet.
Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < < ==
Lange: nicht spezifiziert
In"' index.html '"speichern. "
[ <=> ] 175 --.-K/s in 0s
2015-05-21 21:36:36 (47.0 Mbps) -"' index.html ' ' sales [175]»»
This seems ok to me.
The connection to the repository is great too:
Oracle@SRVB01 Agent] $ wget - No.-check-certificate https://LinuxGRID.localdomain:4903/empbs/upload
-2015-05-21 22:12:36- https://linuxgrid.localdomain:4903/empbs/upload
Auflosen of host name"linuxgrid.localdomain «...» 192.168.146.120
Verbindungsaufbau zu linuxgrid.localdomain | 192.168.146.120 |: 4903... clear.
"" WARNUNG: Kann das Zertifikat von "linuxgrid.localdomain"nicht prufen, von ausgestellt"" / O = EnterpriseManager on LinuxGRID.localdomain/OR = EnterpriseManager on LinuxGRID.localdomain/L = EnterpriseManager on LinuxGRID.localdomain/ST=CA/C=US/CN=LinuxGRID.localdomain««:.
Ein signiertes selbst Zertifikat found.
Gesendet HTTP Anforderung, warte auf Antwort... 200 OK < < ==
Lange: 314 [text/html]
In"" Download ""speichern. "
100%[===========================================================================================================================================================>] 314 --.-K/s in 0s
2015-05-21 22:12:36 (1.81 MB/s) -"" Download "" sales [314/314]»»
Some agent messages:
[oracle@SRVB01] of $. / emctl status agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 12.1.0.4.0
Version of the WHO: 12.1.0.4.0
Protocol version: 12.1.0.1.0
Home Agent: / u01/app/oracle/product/Agent/agent_inst
The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log
File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0
Agent process ID: 9477
Parent process ID: 9409
Agent URL: https://SRVB01.localdomain:3872/emd/hand /
Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /
Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload
Starts at: 2015-05-21 21:24:34
Started by user: oracle
Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)
Last charging: (none)
Last download successful: (none)
Last attempt to download: (none)
Total megabytes of XML files uploaded so far: 0
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0
Available disk space on the file upload system: 75,14%
Collection status: activated Collections
Pulse Status: Ok
Last heartbeat to WHO attempt: 2015-05-21 21:43:38
Last pulse in SGD: 2015-05-21 21:43:38
Then, at the request of the heart rate to WHO: 2015-05-21 21:44:38
---------------------------------------------------------------
Agent is running and ready
/emctl download agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Download EMD completed successfully
But if I do a check - no uload happened
[oracle@SRVB01 bin] $. / emctl status agent
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 12.1.0.4.0
Version of the WHO: 12.1.0.4.0
Protocol version: 12.1.0.1.0
Home Agent: / u01/app/oracle/product/Agent/agent_inst
The agent logs directory: / u01/app/oracle/product/Agent/agent_inst/sysman/log
File binary agent: /u01/app/oracle/product/Agent/core/12.1.0.4.0
Agent process ID: 9477
Parent process ID: 9409
Agent URL: https://SRVB01.localdomain:3872/emd/hand /
Local agent NAT URL: https://SRVB01.localdomain:3872/emd/hand /
Repository URL: https://LinuxGRID.localdomain:4903/empbs/upload
Starts at: 2015-05-21 21:24:34
Started by user: oracle
Operating system: Linux version 3.8.13 - 68.2.2.el6uek.x86_64 (amd64)
Last charging: (none)
Last download successful: (none)
Last attempt to download: (none)
Total megabytes of XML files uploaded so far: 0
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0
Available disk space on the file upload system: 75,14%
Collection status: activated Collections
Pulse Status: Ok
Last heartbeat to WHO attempt: 2015-05-21 22:03:39
Last pulse in SGD: 2015-05-21 22:03:39
Then, at the request of the heart rate to WHO: 2015-05-21 22:04:39
There is no active firewall
I tried to fix it with this command:
" . / emctl remove property - name" oracle.sysman.core.omsAgentComm.ping.pingCommand "" "
Hope everyone has an idea

I think I solved this problem.

First configure everything the maschine again one by one, don't use is not the function of the cloning of VM.

Adding a link

ln-s /lib64/libpcap.so.N.N.N r/lib64/libpcap.so.0.9.4

and installed there yum install subversion

I installed the packed listed in the Enterprise Manager configuration by hand.

Before that I did by yum install oracle-RDBMS-server-11 GR 2-preinstallation.

Unable to connect to the outside through Horizon View Client

http://www.VMware.com/files/PDF/view/VMware-view-evaluators-Guide.PDF
I'm in the middle of evaluation of VMware Horizon View Suite. I set it up according to the information provided in the link above
I am able to connect to my desktop PC internally through the Horizon View Client and HTML.
I am also able to connect to the outside through HTML - BUT NOT - through the Horizon View Client from an external location.
My first thought is that I have all the correct ports open on my firewall to network, that's what I opened, did I miss something?
TCP / 80
TCP / 443
TCP / 4001
TCP / 4172
TCP / 8009
TCP / 8443
UDP / 4172
Any help is appreciated with this!
Exercise 3: connection to a Horizon of a customer of Mobile display view desktop
"Launch the Horizon View Client you iOS mobile device...". "You will be asked to enter the host name or IP address of the view composer Server"
See Server of composer? When I enter this IP address, it does not work immediately, it's a typo?
Any help is greatly appreciated

http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalID=1036208

My problem was solved by following the information provided in the above document (video), but the following two documents where it is also very useful

http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028332

0 224598712 http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1039021&sliceId=2&docTypeID=DT_KB_1_1&dialogID=224578928&StateID=0

Cloud new control panel - unable to connect to the agent

I'm done just to install the last control of cloud 12.1.0.3 by following oracle document e22624.
Everything installed fine and I am able to connect to the cloud control. I manually added a target (our test server). The installation was successful without error.
However the cloud control shows: error of assessment metrics start - unable to connect to the agent to https://server:3872/emd/main / [Connection timed out: connect]

I ran the following on the test server to make sure that the management agent runs:
```
/opt/app/oracle/product/12.1.0/agent/core/emctl status agent
```
and I see this:
Oracle Enterprise Manager 11g Database Control Release 11.2.0.3.0
Copyright (c) 1996, 2011 Oracle Corporation. All rights reserved.
---------------------------------------------------------------
Agent version: 10.2.0.4.4
Version of the WHO: 10.2.0.4.4
Protocol version: 10.2.0.4.4
Agent home: /opt/app/oracle/product/11.2.0/dbhome_1/server_test
File binary agent: /opt/app/oracle/product/11.2.0/dbhome_1
Agent process ID: 24514
Parent process ID: 23632
Agent URL: https://server:3938/emd/main
Repository URL: https://server:1158/em/upload /
Starts at: 2013-11-15 13:16:53
Started by user: oracle
Last reload: 2013-11-15 13:16:53
Last download successful: 2013-11-15 14:34:02
Total megabytes of XML files uploaded so far: 2.68
Number of XML, waiting for loading files: 0
Size of the XML files in the upload wait (MB): 0.00
Available disk space on the file upload system: 81.34%
Directory to upload Data channel: /opt/app/oracle/product/11.2.0/dbhome_1/server_test/sysman/recv
Last pulse in SGD: 2013-11-15 14:36
---------------------------------------------------------------
Agent is running and ready
According to state that something is wrong. The test server is currently installed OEM Database Control. The directions said nothing about not being able to install Cloud control and have control OEM database.

My question is this: can I have the OEM Database Control and control of Cloud? If this is not the case, what should I do to get the Cloud control to work?

Thank you

I opened a support ticket with Oracle. It was that the firewall is blocking communication from the SGD server to the agent. Everything works now as expected.

View is unable to connect to the agent with PCoIP

We can connect to the virtual machine with RDP and PCoIP not working. The client starts to connect to the agent, the screen remains black, then customer exits
The firewall should not be the problem, customer and agent can communicate because of newspapers and wireshark.
Any idea is welcome here.
Our facility:
ESX 4.1
VCENTER 4.1
VManager 4.0.1 (updated)
VIEW 4.0.1 (updated)

I think this may be your problem.

When updating ESX 4.0 Update 2 my PCoIP broke.

There is a task 4.0.1 agent that must be installed on the virtual machines.

VMware KB 1022830 KB1022830

How can I connect to the internet through the dial upward through the computer another internet connection?

If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

Hello

1. are you referring to Windows Server 2000 or Windows ME?

If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

http://support.Microsoft.com/ph/1131

If you use Windows ME, visit the below mentioned link.

http://support.Microsoft.com/kb/234815

Unable to connect to the internet through WRT110

Hello

I can't connect to the internet through my WRT110. I am connected directly but my modem at this point shaw. My DHCP settings will not retain an IP address. I'm going to status on the router (192.168.1.1) and find all information, IP address, subnet mask, Gateway etc. Defautlt are set to 0.0.0.0. I click on the intellectual property of release, then renew the ip and that everything remains as 0.0.0.0.

I tried to set my router to static mode and entering the information in bold to ipconfig below, but which does not either. I also tried to reset the router back to factory default and tried everything on again, without success.

What I'm doing wrong here?

IPConfig:

Ethernet connection to the Local network card:

The connection-specific DNS suffix. : vc.shawcable.net
Link-local IPv6 Address...: fe80::c056:e161:d17f:3 b 09% 11
IPv4 address...: 70.79.143.236
... Subnet mask: 255.255.252.0.
... Default gateway. : 70.79.140.1.

Tunnel adapter ISATAP.VC.shawcable.NET:

State of the media...: Media disconnected
The connection-specific DNS suffix. : vc.shawcable.net

Card tunnel Local Area Connection * 11:

The connection-specific DNS suffix. :
IPv6 address: 2001:0:4137:9e50:3 c 46:300 d: b9b0:7013
Link-local IPv6 Address...: d fe80::3c46:300: b9b0:7013% 13
... Default gateway. :

Card adapt 6TO4 tunnel:

The connection-specific DNS suffix. : vc.shawcable.net
IPv6 address: 2002:464f:8fec:464f:8fec
... Default gateway. : 2002:c058:6301:c058:6301

Decreed a second IP address of my modem and I could contact my ISP. My router works now after power off.

Unable to connect to the Agent to push with my credentials in the project PushCollector 10.1.

Hi all!

I am trying to create a client application to push to go with my project that I am creating a customer and am trying to learn how the PushCollector 10.1 functions to do this. I seem to have a problem, however, where the application may not be able to connect to the Agent to push after entering my credentials sent by the Services of Blackberry Push team showing.

I logged into my account to make sure it is active and it is and have re-joined the AppID and the PPG URL 8 times literally!

What I read I don't need to change anything in the file bar.xml for the PushCollector, but maybe I missed something.

Can someone help me please?

Thanks for your time,

Rob

Push requires a real device, so I think you have to find the cause of the problem.

Unable to connect to the Agent push

Hi all

I'm having some trouble with the Push service - all examples of applications that I tested (collector Simple Client Push, Push and push Capture), including the app I am train, have a problem with the connection to the Agent to push (aka. the bb::data :ushService.hasConnection always returns false).

Relevant information to the debug log:
```
gid size[1]
gid[1000]
 dname:  "XXX"
 providerApplicationId:  "34XX-XXXX19BDXXXX4M52XXXXXX7436XXXX2c3"
 is enterprise perimeter:  false
Connect to personal/consumer agent:  true
[ "cc.jlx.boreas.invoke.push" ]:  /pps/services/push/ipc  open failure:  6
Push pps file is not open.
```
The error "/ pps/services/push/ipc open failure" was mentioned in an article on the devblog saying that it happens when the signature keys have push privilege, but I received my key a few weeks ago, so it shouldn't be the isssue. I also checked that the application has permission to "_sys_use_consumer_push" in its bar-descriptor file.

It might be worth noting that I tested it in Dev Alpha Simulator with SDK version 10.0.9.2318 on a Mac.

Any ideas? I have the feeling that I missed something completely Basic.

Hello

Unfortunately, push is not supported now on the Dev Alpha Simulator.

So you need physics Dev Alpha or 10 BlackBerry device to test with.

Matt

What happens if I am connected to the internet through two different sources or more?

What happens if I am connected to the internet through two different sources or more?

You get Internet from two sources. What did you expect to happen?

This is not double the speed of anything...

How can I connect to the server through putty unix

Hello
Could you please help me on this query, how do I connect to the server through putty unix
If I have different unix servers so how I choose my destination server
Thank you.

What does this have to do with SQL or PL/SQL?

Allows users not able to connect to the server through Vmware Player Flex

Hi all
I created a Horizon Vmware server with Flex. Created Windows Image and saved the VM in the Flex web console. The configured policy and gives the right to some windows domain users to use this Image.
I created a group called "Mirageadmin" and added two users in this group. Mirageadmin belongs to a group of Administrators local and also added to the Administrators group in the console of Mirage . These two users can connexiona Horizon flex web console.
My problem is that when the user right connect to the server through Vmware Player Flex, its list of username or password is incorrect, please try again. But the user name and password is correct. Later one of the user added to the Mirgaeadmin group policy gives right I. While this user can connect to Flex server via Vmware Player.

1 should. users entitled be part of the local administrator group of the Flex server?
2. do I need to add these users right somewhere in the console of mirage?
Thanks for supporting.

Hi all

Turn history on security locally should be set in the server included users who try to connect via Vmware Player.

Our GPO has been tighten to allow only to administrators and users authenticated to allow log on locally. Adds a new GPO to enable a group of users to log on locally, which solve the problem.

Unable to connect to the database through OEM
Hello

ORACLE VERSION: 10.2.0.1.0
OPERATING SYSTEM: LINUX

I was unable to connect to my database through OEM. This is to show the error like this in my OEM.

Enterprise Manager is unable to connect to the database instance. The State of the components are listed below.

Here it is the list of the errors written to the trace file.

2009-07-13 14:55:18, 351 [EMUI_14_55_18_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: response has already been committed
java.lang.IllegalStateException: response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
at oracle.sysman.eml.app.Console.doGet(Console.java:135)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
2009-07-13 14:55:20, 893 [HttpRequestHandler-25640626] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:20, 925 [HttpRequestHandler-25640626] ERROR eml. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:20, 926 eml ERROR [HttpRequestHandler-25640626]. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
2009-07-13 14:55:20, 959 [HttpRequestHandler-23946437] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:20, 990 [HttpRequestHandler-23946437] ERROR eml. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:20, 991 [HttpRequestHandler-23946437] ERROR eml. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
2009-07-13 14:55:42, 047 conn of ERROR [OmsServiceDriver thread]. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:51, 030 [HttpRequestHandler-12767107] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:51, 062 eml ERROR [HttpRequestHandler-12767107]. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:51, 063 eml ERROR [HttpRequestHandler-12767107]. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
2009-07-13 14:55:51, 096 [HttpRequestHandler-28346522] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:51, 127 [HttpRequestHandler-28346522] ERROR eml. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:55:51, 127 [HttpRequestHandler-28346522] ERROR eml. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21, 162 [HttpRequestHandler-32110028] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:56:21, 193 [HttpRequestHandler-32110028] ERROR eml. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:56:21, 194 [HttpRequestHandler-32110028] ERROR eml. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21, 227 [HttpRequestHandler-12767107] ERROR conn. ConnectionService verifyRepositoryEx.433 - invalid connection Pool. ERROR = ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:56:21, 258 [HttpRequestHandler-12767107] ERROR eml. OMSHandshake getParameterFromDB.402 - ORA-01017: name of user and password invalid. connection refused

2009-07-13 14:56:21, 259 [HttpRequestHandler-12767107] ERROR eml. OMSHandshake processFailure.619 - OMSHandshake failed. (AGENT URL = http://VTL3200DB:3938/emd/main) (ERROR = INTERNAL_ERROR)
You search properly

https://metalink2.Oracle.com/MetaLink/PLSQL/f?p=130:14:7431989769142239402:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 259379.1, 1, 1, 1, helvetica

Unable to connect to the internet through guest account

We cannot connect to the internet using the guest account. I suspect a security update or my mischievous adolescent son changed a setting. This just recentlty that happened (in the past 48 hours) HELPS... I spent over 2 hours trying to get it online. The journal of WMD works very well and I was able to create another account just to see, and it also connects very well. What is the problem and how can I fix it? Thanks, Biggator

You do not want to connect to the Internet by using the guest account because it is precarious. In fact, you won't use the guest at all account. The guest account is a special system account, not one for when you feel hospital. For some reason, it is disabled by default in Windows XP, Vista, Windows 7, Linux, Unix and OS X.

On TechNet:

"The guest account is intended for users who need temporary access to the system. However, if this account is activated, a security risk may exist because an unauthorized user could have anonymous access to the system through this account. »

http://TechNet.Microsoft.com/en-us/library/bb418978 (TechNet.10) .aspx

So if you have enabled comments, turn it off now and create a standard/Limited (Vista, Windows 7, XP Professional/XP Home) for your visitors. Call the new user account to something like "visitor".

And since you mentioned a teenage son:

Make sure that the computer is clean:
http://www.elephantboycomputers.com/page2.html#Removing_Malware

MS - MVP - Elephant Boy computers - don't panic!

Computer with Vista unable to connect to the internet through two computers with Windows 7.

Dear engineers,

In our House, we have two new computers Windows 7 connect to Wired internet access. Our friend came in hoping to play some MMO games with us on our connection (it has windows vista). When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device. He could see the two computers, but could not get an internet connection and no viable ping. We checked the network map and he showed my computer with one? related to my husband then connected to the internet. Inside, there was an announcement indicating that the following devices are not displayed in the network map. under of course was listed both our friends media device and the computer device. I searched Control Panel and gave access to anyone on the login to my husbands system as long as me. What happens if nothing else can I try to have its system you can connect to our internet?

Thank you for your attention,

Cerisea

Hello

If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

You must also set your computers with the computer account of the friend as a user on your computer.

Everyone does not mean everyone wishing to connect.

If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

Everyone isn't everyone group, only John, Jill and Jack.

In general.

Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

Public share = network Public (as Internet Café) in order to reduce security risks.

For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

http://www.ezlan.NET/Win7/net_name.jpg

Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

Win 7 networking with other version of Windows as a work network.

In the center of the network, by clicking on the type of network opens the window to the right.

Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

http://www.ezlan.NET/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

-------------

If you have authorization and security problems, check the following settings.

Point to a folder that wants to share do right click and choose Properties.

In the properties

Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

This screen shot is to Win 7, Vista menus are similar.

http://www.ezlan.NET/Win7/permission-security.jpg

The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

When everything is OK, restart the network (router and computer).

* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

---------------------

*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Connections of the agent through a firewall

Similar Questions

Maybe you are looking for