Connectivity between the local OS(windows 7) and Vm OS (Enterprise Linux)

Hi all, I have windows 7 as my OS and enterprise linux 4 as VM operating system. I could connect to VM OS (linux) through Putty and also can Pinger the OS (linux) VM's OS (windows) local. But am not able to do tnsping to VM OS (Windows 7) OS(Oracle 11g R2, LINUX) local, although I copied entry tns VM OS (Oracle) to the local operating system (Client Oracle), I also tried in ezconnect, is not working.i want connection between my LOCAL (Client Oracle) OS and VM OS (Oracle Database).
Anyone with an idea how to deal with this kind of situation, please explain very clearly.

Thank you
Sam.

Published by: 902629 on January 2, 2012 02:51

You probably did not open port 1521 of the firewall (iptables) of linux comments box.

Tags: Database

Similar Questions

  • My PC does not connect to the Internet, a window opens and says DNS server does not respond.

    Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

    My PC does not connect to the internet, a window opens and says DNS server does not respond.

    Hello

    Follow the steps in the article mentioned below and check if it solves the problem:
    http://support.Microsoft.com/kb/314095

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • How to synchronize files between the desktop of Windows XP and Windows 7 laptop?

    I just bought a netbook with Windows 7 Home Premium installed on it. I have a Home Office with 2 desktop computers and a laptop running Windows XP Pro. I use Sync files to share files and make them available offline. How can I synchronize those files on my Windows 7 netbook?

    Try
    Center of control Panel\All Control Panel Items\Sync

    or alternatively, on the web, a similar solution
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=c26efa36-98E0-4ee9-a7c5-98d0592d8c52&displaylang=en

    Tom

  • Connected to the local network, but can not use internet

    I recently had problems with access to the internet after reinstalling windows 7. Before the reinstall worked very well.

    I can connect to the local network without problem, and it shows that the internet is connected. Yet I can not access the internet. When I disconnect and reconnect, I get a few seconds of internet work before it stops working.

    When a diagnosis in the network and sharing Center, I get the error "default gateway is not available" and occasionally "the connection between your access point, etc. and internet is broken"

    Other computers and devices using the network are working properly, although there was a 'competitor IP address' error on another pc, which, after a reconnection, solved itself.

    I use an edimax 802.11n wireless card and a D-link router

    I tried several things to make it work again, but without result. Any help would be greatly appreciated

    disable TCP/IPv6 had no effect.

    I think I can have fixed me, I installed the driver microsoft before the reinstall instead of the driver edimax and internet suddenly started working.

    Thanks for the help of yor

  • My connection to the Local network is suddenly missing

    Hello

    Suddenly, I found I can't access my LAN port because I can't found the option to connect to the Local network in network and sharing Center. I also looked in Device Manager, but there is also the LAN card is missing. I don't know why it's happening. The only change I made is configured LAN properties as set as--> advanced--> liaison & duplex speed--> 100 Mbit/s/full duplex. Although I don't know if it has nothing to do with my lack of LAN option, but that's the only change that I made before I see my LAN is missing. then I reinstalled my windows 7 with the hope that it will be recovered, but after the installation of a new windows 7 the problem still persists and also I am very sure that my operating system windows 7 is all ok to install all drivers base because I used the same OS disk for countless times.

    Kindly help me how to solve this problem, because I can't use any Ethernet connection in my computer.
    Thanks in advance...

    The total absence of the adapter is a hardware problem.  Is this a desktop or a laptop? If Office on the motherboard or card adapter?  If it is a laptop or onboard there may be an option to enable / disable in the BIOS which might be worth checking out.

  • The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

    The Web Acceleration Client error (513) - internal error
    The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

    I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

    Is there a problem with the way Firefox and ancestry.com communicate?

    Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
    Note: This will be you temporarily disconnect all sites, you're connected to.
    To clear the cache and cookies to do the following:

    1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    2. Under "Time range to clear", select "all".
    3. Now, click the arrow next to details to toggle the active details list.
    4. In the list of details, see the Cache and Cookies and uncheck everything.
    5. Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

    This solve your problems? Please report to us!

    Thank you.

  • Why if a system is xp and one system is windows 7 and the two connected to the local network, but file-sharing does not work

    a system is xp, another system is windows 7 basic and both connected to the local network, after you set up shared drive, mowing arrives not

    Hi Abhay,

    I suggest disable you the password protected sharing and check if it helps.

    Networking of computers running different versions of Windows

    Note: Follow the steps in the section "to enable sharing protected by password in Windows 7" and turn off password protected sharing.

  • What is the difference between the activation of remote desktop and adding a 'connection in network connections.

    What is the difference between the activation of remote desktop and adding a 'connection in network connections.

    Hi ChadCrowell,

    Remote Desktop connection allows remote control of your Windows XP Professional computer from another computer running Windows XP Professional or an earlier version of Windows.

    Reference: How to use the Windows XP Professional Remote Desktop feature?

    By creating an incoming connection, a computer can act as a remote access server is running Windows XP Professional, Windows 2000 Professional

    Reference: To make an incoming network connection

    Hope the helps of information.

  • No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

    I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

    Deactivation and reactivation of these two connections: FAIL.

    "Diagnose and repair" on the two connections: FAIL.

    Under dynamic I.P. type to static/static to the dynamic: FAIL.

    Uninstalled all network via Device Manager devices, then restart: FAIL.

    Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

    The command ipconfig/all text follows:

    ----------------------------------------------
    Microsoft Windows [Version 6.0.6002]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.

    C:\Users\Brooklyn's>ipconfig/all

    Windows IP configuration

    Name of the host...: Brooklyns-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel (r) Wireless WiFi Link 4965AGN
    Physical address.... : 00-21-5C-31-87-95
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :
    Description...: Realtek RTL8102E Family PCI - E Fast Ethern
    and NIC (NDIS 6.0)
    Physical address.... : 00-1E-33-4E-2E-F7
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
    ... Subnet mask: 255.255.0.0.
    ... Default gateway. :
    NetBIOS over TCP/IP...: enabled

    Card tunnel Local Area Connection * 6:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
    B4B}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 11:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
    0FA}
    Physical address.... : 00-00-00-00-00-00-00-E0
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    Card tunnel Local Area Connection * 14:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Teredo Tunneling Pseudo-Interface
    Physical address.... : 02-00-54-55-4E-01
    DHCP active...: No.
    Autoconfiguration enabled...: Yes

    C:\Users\Brooklyn's >
    --------------------------------------------------

    Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

    I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

  • Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

    Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

    Right-click on the taskbar and select Properties, and then click Customize.  Look for the connection and modify to display the icon and notifications.

  • How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

    I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

    Hello

    If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

    (a) click Start.

    (b) type network and sharing Center in the start search bar and press ENTER.

    (c) in the left pane, click on change adapter settings

    (d) it would be to open a window with the connection to the wired LAN.

    (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

    (f) it would disconnect the computer from Windows 7 to connect to the local network.

  • I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

    Connection to the local network - properties dialog box

    Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

    Hello Rajaneer,

    Is the computer that you are using a personal computer or a work computer?
    You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  • Cannot connect to the local file and print when the domain controller is not available because the network connection

    Hi all
    Having problems for local users, connection to a file and print server in one of my satellite offices.
    When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
    The domain controller is off site in my main office.
    Environment:
    All local desktop clients are windows machines 7.
    Printing and local file is a windows 2003 server.
    DC is window 2008
    Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
    Any help or thoughts would be appreciated.
    Thank you

    Hello trj'hwma,

    Thank you for the question!

    It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

    Windows 7 IT Pro category

    Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

  • Post updated to SP3 and IE 8, some systems cannot connect to the local network

    A number of machines on my LAN that have recently been fixed to the last State (installed XP SP3, IE 8 and all dry and updated crit) seemed to lose all capacity for networking.

    Device Manager displays all problems, systems were released in market, on a a system restore was performed at a week back but the problem persists. They will not collect a DHCP, our work with a fixed IP address.

    They can only be connected with the local administrator account - domain accounts will not work

    The event log is giving nothing away - very curious!

    I'll try to include measures:

    1 netsh winsock reset (reboot)

    2 netsh int ip reset c:\resetlog.txt (reboot) http://support.microsoft.com/kb/299357/

    3 Uninstall SP3

    I would avoid if possible reconstruction so I welcme possible any other suggestions as to the cause or corrections

    Turned out to be a problem with the site switch - switch reboot solved the problem

  • Impossible to install the bluetooth driver in XP Mode, error "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    I have win 7 pro as my OS, whenever I try to install the bluetooth driver in xp mode, I get an error message saying "this software cannot be installed remotely. Please connect to the local computer, and then try again.

    Check this box:

    http://support.Microsoft.com/kb/2438651/en-us

Maybe you are looking for

  • Satellite A210 - bios update gone bad

    Hi all I was updating of the Bios on my A210 when the laptop stopped yourself during the upgrade (possible overheating problem) and now it wont start at all as bios is lost.Any ideas how to get back there to wake up? There the reset on the M/B bios?

  • Noisy fan on Satellite Pro L830

    Hello for two days, I had new laptop Toshiba L830. Windows 7, 64 bit - RAM 4 GB system. Fan is noisy. He gives sounds. What can I do to get rid of this noise? There is no dust in the new laptop and I work in the House. Fan noise irritate me. Processo

  • Work with the NI USB-6353

    Hello, everyone! I m using USB 6251 OEM for more than two years without major problems, but my applications are increasingly complex and OR start offering NI USB 6353, with many improvements, mainly on the transfer speed.      My problem is: using 62

  • graphics card for a laptop dv9000

    I have a card nvidia gforce 8600 m GS.  I am trying to run Dead Space.  I get a message that my graphics card does not meet the minimum requriements.  I looked up the requirements and I answered that the game asks for, but maybe not for the shading. 

  • HP: HOW TO REPAIR HP LASERJET 1300N PRINTER

    MY PRINTER HP LASERJET DISPLAYS NO SIGNAL LIGHT WHEN I TURN ON, AND THE ENGINE HAS NOT RUN CAN HOW TO SOLVE THIS PROBLEM?