Connectivity with SharePoint

Similar Questions

• connection problem with sharepoint livecycle

  Hello
  We write this message because we have problems related to ' LiveCycleES2 integration with Sharepoint.
  Both applications have been installed on a ' single virtual computer that is running Windows Server 2008.
  As the basis for installation, we have followed the following pdf

  http://www.Scribd.com/doc/38462381/Adobe-connector-forms-share-point-install-config

  (link)

  in all its configurations, the problem
  creating services through the Workbench as shown in this video: http://Vimeo.com/9378807 .
  
  The created process is to fill out a form and then stored as a document. PDF static sharepoint.
  
  By creating the service, we stopped in the part for sharepoint or in the component CreateDocument.
  
  All "internal processes of the above component's properties of the map on the website of library and information document where site URL must load various sites created on sharepoint and all subsites that you don't see.
  Thanks for the "attention, awaiting response.

  Some more queries on the behavior: -.

  1. I see that you have specified a document library in the area. Is this a previous case things were working, but stopped between the two?
  2. What you can try is to specify the SiteURL by yourself, in the format as http://serverName/SiteName (something similar that you use to access Sharepoint server through browser). Once done this, the appeal process and let us know the error you get.
  3. You try things with SharePoint 2007 or Sharepoint 2010?
  4. What is the selected IIS authentication mode? The setting is available in The Central Administration > application > authentication providers > change authentication in Sharepoint 2007. You can attach a snapshot of LoginSettings in workbench as well as the authentication mode selected in Sharepoint for the site you are trying to access.
  5. Also, can you please attach the server logs and workbench? You use Jboss turnkey?  Default server log directory in this case is and for workbench is C:\Documents and Settings\\Workbench.metadata

• URM11g integration with Sharepoint

  Hello
  
  I use the following specifications to integrate URM11g with Sharepoint.
  
  -> URM11g
  -> URM_SharePointAdapter_64bit
  -> Sharepoint 2007 SP2
  -> database: OracleXE11g
  
  I installed the card in the sharepoint server computer and now trying to run the database script to create the tables, but could not able to run the script successfully set up the ODBC data source and it communicates with the database server as well. Executing database script, I get "* ERROR [HY000] [Oracle] [ODBC] [Ora] ORA-00955: name is already used by an existing object *" for table AGENT_DATA, so I dropped the table and reatrted the database installation utility, but this time get a different as Message * "arithmetic operation resulted in an overflow" *, for the AGENT_DATA table. Can you please tell me how I can proceed with this installation?
  
  Thank you
  
  Published by: Prabhu on November 14, 2011 01:20

  OK, since linking you to 11g, the URL changes - I had a senior moment and don't think to report it as soon as possible.

  You must use the "_dav" port to connect.

  http://: 16300, _dav, MNR, idcplg

  Now as this question has been marked 'responded', and has been answered the original question, you really should start a new thread for these new challenges. In general when a question is marked as answer, most people leave their reading that you hurt if you expect an answer, and we clearly had to a new topic that the original post said.

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Loss of connection with iCloud

  Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

  I assume you mean iCloud.com website?  How are you internet connection otherwise?

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• In a roaming network, Mac always connects with AE which is further away

  So, I had a roaming network for years to host a detached office which was too far from my house.  Worked very well.  Now, my family and I have moved into a temporary rented condo (two floors).  Therefore, there is a lot of wifi networks in the area in conflict with.

  After trying to extend the network (signal too low in the area), I decided to try the roaming network again.  Most of the time, it works very well.  But from time to time, my iMac (on the ground floor) connects with the Airport Extreme, which is on the floor instead of the Airport Express, which is down in the same room as the iMac.  What happens when it connects to the Airport Extreme on the floor, my Tx rate drops to less than 100 Mbps (sometimes dramatically if) and I am unable to listen to the music to my Airport Express without dropouts.

  The dressing was to turn off my wifi on the iMac, and then turn it back on.  It will then connect to the Airport Express.   The problem is that I have to do this in general once a day as my iMac will enter into the "standby" and periodically reconnect with Airport Extreme when I wake up (or if I re-enable it if off).  Ideally, he would stay with the Airport Express.

  So I hope that there is an alternative.  I thought about simply renaming the Airport Express network in the different name of Airport Extreme.  But all the itinerant instructions whereby I know that network names must be the same for all airports in the roaming network.  But perhaps this is not the case.

  Comments are appreciated!

  Unfortunately, you encounter a known issue with the use of a roaming network... and it is not specific to those provided by Apple either. The "solution" you use, although not elegant, is basically everything with that we have (at this time) to go.

  In theory, your iMac fixed, must always connect to the Wi - Fi with the signal network hard... not necessarily the closest to it. It may be possible, since you mentioned that you live in a highly congested environment Wi - Fi, your iMac is struggling to determine the right network to connect to when starting.

  Of course, a more "permanent" solution for your iMac, at least, would connect directly to the nearest base by Ethernet station.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  Maybe it is locked, Apple do not unlock phones, then call O2.

• error "too many concurrent connections" with Gmail

  I started all of a sudden the error "too many concurrent connections" with Gmail with one of my gmail accounss. I googled and it seems like an old problem and I tried all the recommended solutions, but none worked. I have two gmail accounts and the other continues to function properly. Suggestions!

  Reduce the number of labels has solved this problem. Seems specific to TB and GMail (google says you can have hundreds of emails - I have about 60). There are mentions of which can be found via google - but no definitive statement on the problem, with workarounds, etc.. Now I will be anxious the next time I have to add a label, not knowing if it will work or cause this problem.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.