LabVIEW loop stop when he puts end teststand

Similar Questions

• While the loop stops before the countdown ended

  Hello everyone

  I have a problem with this scenario:

  

  What I want is that I can enter a series of tables and then he will choose the first line being the first cycle of number is 0, the second 1 and so on. I want this loop to continue until I left my empty tables. The problem is when I test, it stops immediately, but when I select all seems to work fine.

  This is a program I am writing so he can control some pumps - I put in a number and weight, and then it converts it to a % of setpoint that will trigger the pump. When the countdown is finished then it should start the dosage with the following weight and time.

  I'm relatively new to labVIEW. I tried to look around, but I have not found who could help me, I'm counting on you!

  Thank you very much

  Theis

  

  
  

• my macbook pro stops when I put it near my little fridge there is a risk

  the macbook and the refrigerator

  Nearby magnets can make a Macbook pro sleep.

  Do not keep the Mac is close to a referigerator.

  MacBook Pro goes to sleep when stacked.

  http://support.Apple.com/kb/TS2917

• What happens to the Muse site when you put end subscription Creative cloud?

  What happens if I leave creative cloud / Muse? The site die? The customer will always be editing capabilities?

  Hello Andrea,

  If you have hosted the site British Colombia however 5 free sites you get with membership of cloud, the site will end once the cloud subscription has expired. If you have not hosted the site on BC or not against the free sites you get with membership of clouds, then nothing will happen on the site. It will go on its billing cycle.

  Kind regards

  Aish

• How if the stop message loop when I put looped at a specific time.

  I don't know how while loop stop at a specific time. Generally. While the loop stops when we enter into stop button or mistakes have been made. now I want to while loop stop at a specific time, 40ms, 20ms and so on. How can I achieve that. Thank you!

  Use the number of cycles. Get the current number of cycles when you run this loop.  Add your time (20 ms) to the starting value, creating a 'downtime '. At each iteration number of cycles review and compare the current value of the value 'stop time '.  If it is higher, then stop, otherwise continue.

  Note that on an operating system, you will see some jitter in trying to use loop as small as 20 ms times.  You may need to go to a real-time, or something hardware system timed for any accuracy or stability to these time scales.

  Lynn

• laptop stops when I enter the user name.

  OT: Laptop * low randomley.

  laptop stops when I put a name

  My all started when I did a search people

  Hello

  You do not give us a lot of information to work with.

  What name?

  What looking for people?

  We need more information.

  It may be an overheating problem and it is normally the main reason for your problem.

  .

  If it's a hardware problem, it would not not to restart.

  That said, it is possible to have a hairline cracks in the motherboard, etc, which becomes obvious as soon as it warms up

  Check vents for hair, dust, etc. and do not use a laptop when it is based on material surfaces: bedspreads, blankets, etc.

  If the problem persists, because it of a laptop, bring it to a local computer and reliable repair shop and get them to open and clean the dust inside...

  Here is an interesting discussion about the reasons for your problem:

  http://PC-trickandsolution.blogspot.com.au/2011/07/fix-laptop-overheating-shutdown-problem.html

  NB: > however 9 out of 10 cases of overheating are caused by obstruction of the air flow.

  See you soon.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• Entry value change when he went from teststand for labview.

  Hi all

  I try to spend my labview VI value hexadecimal teststand. When I run the VI independently giving the value as 00000010 I get the expected results of the VI.  But even when value is passed through local variable teststand, when it reached VI of entry it was conerted to 000000 A 0 and so I'm getting wrong output.

  I am not able to understand how the value goes to the value of the input parameter when she went from teststand for labview.

  Any ideas?

  I discovered the error.  I was entering the value in the wrong format in teststand... instead of 0 x 10 I've entered only 010 and was therefore is converted to A.

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• How stop the little black box that is a copy of what is on my mouse to come when I put it on the text?

  Original title: changes of mouse

  How stop the little black box that is a copy of what is on my mouse to come when I put it on the text?

  Hello

  1. have you made changes on the computer before this problem?
  2 have you tried to change the theme or settings and check mouse?

  Read the following article which can be useful:

  To change the appearance of your mouse pointer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/WIN_POINTERS_CHANGING.mspx?mfr=true

  If possible, send us a screenshot of the mouse pointer which could help us help you better.
  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/c86de820-C620-401c-A804-9f6337cd3053

• My guard computer shut down when I'm not working on any topic. It also stops when I start by putting.

  I can work on e-mail or anything either, then all of a sudden it stops. Then he comes after the message comes on saying it closes unexpectively.

  When she stops when I start by putting it on the same thing happens.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to find error messages in the event and after feedback from the observer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• Windows 7 and I have a batch file to copy files from 1 computer to another. It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening

  I am running Windows 7 and I have a batch file to copy files from 1 computer to another.  It works fine alone, but when I put it to run in the Task Scheduler it shows it ends successfully, but nothing is happening.  None of the files are copied, and the control box does not appear.  Any ideas?

  Run a batch file in Task Scheduler

  Hello ITGIRL17,

  Thanks for posting on the Microsoft answers Forum.

  Configure your task under your administrator account.
  Then go to the folder with the batch file and ADD on control for the folder administrator permissions and each of the files in batches.
  If the batch files write data, then the target for the task should ALSO have all explicit permissions.
  Now try to run the Task Scheduler task.

  Also check the information from the following link and look specifically at Brian Vandemark Sommaire steps on 2 September.
  http://social.technet.Microsoft.com/forums/en/winservermanager/thread/d47d116e-10b9-44f0-9a30-7406c86c2fbe

  I hope that this information will help resolve your batch file does not problem.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My printer was working fine. When I put in a new cartrege of ink it has stopped working. This is a HP LaserJet M1212nF MPF.

  My printer was working fine. When I put in a new cartrege of ink it has stopped working.  This is a HP LaserJet M1212nF MPF.

  My printer was working fine. When I put in a new cartrege of ink it has stopped working.  This is a HP LaserJet M1212nF MPF.

  Hello

  HP Support Forums:
  http://h30434.www3.HP.com/

  24/7 online for home and individual HP products support | HP support:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&query=DeskJet%202050&tool=&product=top

  Concerning

• computer stops when using Skype

  My laptop stops when you use Skype shortyly after the launch of video call, there is a new problem in the past, everything was fine.
  We have the laptop that runs daily every day could have questions related to heating.
  It seems there is no error message in the event viewer.
  When I turn on the computer it does not say she stop properly and it can run for hours, but as soon as you Skype even once turn off with warning message.

  Bravo Tim

  I ended up putting the nozzle of the vacuum on the computer while suction fan was off and sucked on a pile of dust that was clogging the fan, laptop is Purring like a kitten, heaters do not and do not turn off.

  Thank you for your guidance and quick response.

  Bravo Tim