Constant beep Pro A200 satellite every 30 seconds

Similar Questions

• Lock screen and mouse L850 satellite every 2 seconds

  I think I have a hardware problem with the Satellite PSKDLA - 0C800R L850.

  It is a laptop I bougth to my wife but he has ended up with my stepson of Uni studies. While he had it the hard drive is not one of his friends replaced. twelve months later, he advised it was gone blackscreen and G'nort would turn out.

  I finally got hold of it again and managed to drain the power remaining and replaced the CMOS battery remove a strip of RAM and it starts fine. I've proved a faulty stick so that left aside. Then I realized that there was a problem with the screen and the mouse

  . The screen would brighten up (wash out) then Flash and stabilize. First thought was video chip or the driver.
  At the same time would lock the mouse. When the screen clears the mouse would again.
  Happening every three or four seconds but now every two seconds. It is more difficult to do something.

  Have reloaded many drivers, but I think it is material, but not sure if it needs a motherboard or processor.
  Can you advise?

  I forgot to mention that the image of the screen is slightly down from senior management.
  Tere is a few millimeters of black with a white line on the top edge of the image.
  This white line seems to come on and off with the locked mouse synchronization and the screen. This is another indication of the problem or the backlight?

  Hi, have you checked the thermal paste between the CPU and the heatsink?
  CPU fan blows hot air outdoors?

• Satellite A80 121 does not start and make a beep after every 15 seconds

  Hello
  I have a Toshiba Satellite A80-121, and it won't work. Yesterday, worked all very well, but now it does not start.
  When I press the button the button normally has a blue color, then the screen stays black, no image at all, then the fan stops. Then I got a beep every 15 seconds.

  Can someone help me what is wrong?

  Thank you very much for your help

  Hello!

  It sounds like a hardware malfunction...
  If you have installed two RAM sticks try it with a single. Check it!

  I m not a technician to laptop but the problem may be with the motherboard, RAM or CPU, but this is my personal opinion.

  Good bye

• Satellite Pro A200: A continuous beep on startup top and freezing

  Hello

  It comes to Varun of India. Could someone please help me solve a problem which has been haunting me the last two days. This problem is currently arising in my Pro A200 satellilte. Actually, the problem is that one continuous beep sound from internal speaker at startup is when the name TOSHIBA appers at boot time and more it freezes it right of this screen. But, I still somehow using my system by pressing F5 or F9, and then let it start manually in NORMAL MODE.

  But, I can't keep doing this all the time. And what is more, this beep blows continuously only when the system is started and it will hang up within the same screen until I press F5 or F9. I did restore my system but no use. Could someone please help me in this.

  Sincerely, waiting for the answer...

  Verhoeven...

  Hello

  To be honest, it's very strange question. What is some external device connected to your laptop?
  Have you tried to update the BIOS to the latest version?

  Sorry, but I think that in this case, there is not a lot, you can do it. Perhaps the BIOS update, clean install of the OS. All that s.
  Maybe you should contact the closest service and ask what it can be.

• Weird noise on Satellite Pro A200

  Hello

  I [Toshiba Satellite Pro A200 | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&PRODUCT_ID=137003] a few months and my hard drive makes strange noises, those in the next few days! Looks that scream for a period of about 3 seconds and it is very very strong and sometimes randomly.

  I'm not really sure it's HARD drive (because I have never heard of this kind of sounds from the HARD drive)... or maybe its cooler? I do not know...
  I think I know how hard disk sounds when his old or dying but it isn't like that, without humility, not by clicking on, no constant noise...

  I had no errors or similar messages, everything works perfectly and silently, no problem at all, but that his self is panic.

  Someone has an idea?

  Thank you very much

  I suggest you to visit some partner service or repair shop, because these sounds are no good signs. Maybe your hard drive kiss you goodbye and you will lose your important data?

  Who knows, just send your machine or visit a few techie and let check your system on some coming hardware failures.

  If you want to send your machine to an authorized service partner, see [THIS | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] link out.

  Have a nice weekend

• Fanspeed went the Satellite Pro A200

  Hallo,

  the fan speed increases after bios update. I'm not the only one, but all others have the same problem or not? The fan runs every 30 seconds of high level, too strong. In addition, I went outside and again, the fan works every 30 seconds. SpeedFan said that two hearts are on 10 C. So why does the fan work? After checking the toshiba power management, I changed battery. But this view has not helped. The fan runs again every 30 seconds, but the fan speed does not detect a fun Temperation. The two nuclei of 30 c to surf and send. And another fact is that I want to use carrots for 2 GHz and not 800 Mhz (utility). Change cooling EIB defragmentation method and the intel utlity says 800 Mhz to 2 GHz! It seems that the method liminized toshiba carrots at 800 Mhz?

  If there is a chance to roll back the bios, please help me. Or if there is a guy from toshiba, so please tell the BIOS programmers! In addition, my olders toshibas allowes to control the speed of the fan by the bios or software (fanspeed), why does'nt the satellite pro A200? The fan is too strong tension and the offset of the Temperation is at bottom.

  Please another you experiences, even, you have no solution for the problem.

  Bye - Daniel

  (installed under Vista Ultimate system, all new packages of windows and toshiba)

  Published by: ADMIN on February 16, 2008 20:52

  In most cases the update BIOS helps ;)
  But thanks for this info!

• [Satellite Pro A200] - slow when problems of transfer and the warmth of the data.

  Hi people.

  I have a 1.5 years old Toshiba Satellite Pro A200 with 200 GB HARD drive standard. For some time, his behavior is just... weird.

  Sometimes the system slows down. She behaves just slow, it freezes frequently for a second when simple tasks such as entering the text. It; s busiest during intensive data transfers (e.g. copy files via FTP from my copy of the USB or LAN), but sometimes it happens even when no application other than Firefox does. It is not apparent, so I wonder - service it will take in terms of warranty (which means - is there a probability that you will say that everything is perfect and charge me for it?)
  The computer was once on the repair under warranty, they replaced the HARD drive with another. Is it possible that the other has problems as well (check S.M.A.R.T. discovers nothing). Or is it maybe faulty SATA controller?

  Another thing is the temperature. During the normal work (Internet, MS Word) two hearts runs at 60 * C. When the set temperature may exceed 90 * C and the computer sometimes shuts down. I guess the problem is dust accumulated inside the laptop but I do not see how can I clean.

  Go to the service of this kind of problems?

  Virus scanners can slow a system down considerably, what antivirus do you use?

  If you have a lot of programs installed, perhaps its time to back up your data and reinstall Windows. I do it myself every year since Windows tends to become bloated and slow after a while.

  With respect to the dust, you can Sauté using a can of compressed Air sprayed through the main entrance of air (when the system is off).
  Or if dust is really bad, you will need to send it to a Service provider authorized to do so and cleaned disassembled.

• Satellite Pro A200 - drivers need Win7 & feature keys FN

  Hello

  I have little problem with my Satellite Pro A200-29N. I installed him win7 and now I can not find drivers (only completed ValueAddedPackage).
  Seconds are the keys FN they does not work:(befor j'ai WinVista)

  Old laptop as your SP A200 models works perfectly with Windows 7 32 bit OS.
  I checked the download page of Toshiba and Toshiba complete offer of assistance for Win7 32 bit, but not for the 64bot version.

  I assume you are using the 64-bit version, right?

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Satellite Pro A200 - black screen with a blinking cursor

  Hello

  I'm new to the forum and have a big problem.
  So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor.
  Also just as the screen goes black a beep can be heard which shows windows boot.

  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  Please go into the BIOS settings and check if the HARD drive is listed there.
  The blinking cursor is a typical sign of a malfunction of the HARD drive.
  Eventually the HARD drive is dead and you need to replace it and reinstall the operating system.

  Good luck

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• 2nd hard drive for the Satellite Pro A200

  Hello

  I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
  Someone knows the reference to the 2nd hard drive cable?
  Thank you!

  Stand by.
  When you remove the HARD drive to the second HDD can see HDD SATA conector?

• Satellite Pro A200-PSAE4E - computer laptop shuts down randomly

  I've had my Satellite Pro A200-PSAE4E for about a year and a half now. He ran very well most of the time, but in recent months he has been stop itself randomly. There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  After frustrated with her, I did a full format my HARD drive and started from scratch. This does not solve the problem, and since then, the taskbar freezes. When I click on it I get the error and the hourglass cursor message "Windows Explorer is not responding... "I then have to click"restart", which makes the taskbar disappear for a few seconds before returning (usually without my sound icon).

  The laptop turns off when it is connected to the electric network with & without the battery and when running only on battery, so I excluded all power problem.

  I have considered it heats up too, but I use a block of cooling with built-in fans and has not himself in a few minutes after being hit not 24 hours, so I'm not sure that's the problem.

  Someone at - it ideas?

  I am running WIndows Vista Home Premium 32-bit if that's any help.

  Thank you.

  > It worked fine most of the time, but in recent months he has been stop itself randomly.
  > There is no warning or "Windows is shutting down" he just me using my computer to a blank screen.

  I think that the problem of overheating.
  The fact is that the laptop would be down automatically stops in order to avoid that the pieces of equipment against damage.
  In most cases this problem can be solved very easily. Using a jet of compressed air, you can remove the dust from the cooling modules and fans.
  I clean my fans from time to time, because I noticed a higher temperature and the laptop was a little stronger.

  Check it out mate

• XP installation LAUGH on 32 Satellite Pro A200 laptop via computer

  Hello

  Can anyone help? I try to install 32 laptops (Satellite Pro A200) through Services of Installation Windows 2003 Server remotely. I had problems with network cards and now have these working by adding pilots in a $OEM$, $1, drivers, network card and record the thought that it might be easy to use the same solution to install the drivers for the SATA controller. How wrong could I be! I'm now pulling my hair out. The machines have the drivers installed in the same way ($ $OEM$ etc.) in a directory marked sata. I used the drivers from the Intel - extracts on floppy disk and copied from there site. Whenever I try to recreate the image, I get the same error "Windows does not detect hard drives" and it drives me crazy! I edited risstnrd.sif, textsetup.oem etc etc nothing works.

  I found a link on the German Toshiba site to download the drivers in this situation, but the link is quite slow, I tried to download these drivers now three different places (3 different accounts of ADSL) and each begins at about 36 k per second then decreases until bytes per second and then fails. (It's only a 21 MB file!)

  If someone managed to deploy these laptops via RIS? If so can you please let me know how you got it done and what drivers you used?

  Thank you very much

  Hello Mark

  I think LAUGH installation complicated theme and I'm really skeptical anyone will be able to help you. If you have time, try using the advanced search and check the RIS results as search terms.

  Otherwise, you can create your own recovery DVDs and use it for the installation of the OS. For the recovery procedure, you need 20 minutes.

• Satellite PRO A200 power issue - will not start

  Toshiba Satellite PRO A200 (model PSAE4E-00U004EN)
  OS Vista Business (not that get us here!)

  OK, here's the problem: battery led (blue), AC disconnected. Turn on (absolutely no hard disk activity)

  See attached picture + 30 seconds of video...

  Image = http://i37.tinypic.com/2lv00ow.jpg
  7 MB video = http://tinypic.com/player.php?v=294ns6r&s=4

  Here's what I tried...

  Removing the battery
  Remove and put back in place the two sticks of RAM
  Withdrawal of one of the sticks of RAM, a start in (and vice versa)
  Withdrawal of the DVD player
  Hold the power button for 20 seconds to evacuate the residule power, then plug back
  Holding the Fn key and pressing the power button
  Holding the 0 key and pressing the power button
  Still nothing...

  I hope you guys can help out me? Tomorrow I'm going to disassemble the laptop, maybe there is a blocked fan and this is a heat issue? or otherwise perhaps the power button is somehow disconnected?

  I downloaded and printed the disassembly instructions
  (http://www.irisvista.com/tech/laptops/toshiba-satellite-a205/laptop-disassembly-1.htm)

  Please help me!

  Hello

  Looks like a serious problem.
  But for the first time, try this:

  -Remove the battery and unplug the AC adapter
  -Wait about 20-30 min
  -Reconnect the two parts and try to turn on the laptop

  If it is not possible to power the laptop then the problem must be related to a serious hardware problem and only the ASP would be able to help you and to see what's exactly wrong with the machine.