Constantly get the alpha value

Similar Questions

• Get the RGB values of existing clip

  Hello
  
  I'm trying to get the RGB of MC that is loaded in the main SWF file values. (This means that the RGB values are not addressed, getRGB returns 0.)
  
  Does anyone have a solution to get the RGB values for existing MC on which setRGB is not used?
  
  Thanks in advance.
  
  Best regards
  Rick.

  Hi Peter,.

  the getPixel32() method works. The only thing I can't understand is the output of the function. I mainly get 0 as the output of the Web beacons (black fill, alpha 0 - set with new BitmapData()), but there are also negative values. The thing I've done is ignore all values <= 0="" and="" use="" the="" value="">0.

  The code is attached (cut out irrelevant code, so there might be errors when pasted into Flash):

  ----------------------------------
  ----------------------------------
  Hi RothRock,

  I have not tried to apply a transformation to the authoring tool, but who would probably work (in theory, it seems logical to me). But that would mean almost the same as the creation of vars with the values inside the imported MC. It's not easy to use because it passes for a minimum of 1000 MC who problably will increase rapidly. The MC will also be created by my client that does not have too much Flash. But as you can see, the code below provides an adequate solution.

  Best regards
  Rick.

• Where does FireFox get the default value for a preference of. What is the format of the file that contains the default value?

  Where does FireFox get the default value for a preference of. What is the format of the file that contains the default value? I need the actual default value for an individual preference.
  Topic: config shows some default values, but I need the source from which everything: config returns to the default value.
  Any help in this direction is greatly appreciated.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x 64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

  The preferences that are not hidden if they have by default are stored in two JavaScript text files in the Firefox program folder
  You can open them in a tab in Firefox through these links:
  resource:///defaults/pref/firefox.js
resource:///greprefs/all.js


  (702598/forum/1/702598)

• Get the Max values and average of the different cycles in the single channel

  Hello

  I'm trying to get the Max values and average of the single channel that has different cycles it contains. I tried to use commands such as Chnclasspeak3 and chnpeakfind, but they were not useful for me. What I need is the Max values and average of the different cycles numbers saved in the data channel.

  Exampld if the string contains 5 numbers of repetitive cycles, then we must find the maximum values and the average of these 5 cycles in the single channel. Attached reference data. This is the .raw file and I have the plugin for it to use in diadem 11.1.

  Kind regards

  X. Ignatius

  Hello, Ignatius,.

  Sorry, it took some time to provide a replacement based on the script for the function. Please take a look at the attached script. I changed the script to use my function if the tiara-version is less than 12. My script function is not as fast and more stable than the implementation of tiara, but for now, it does the job

  Andreas

• Get the highest value of acquired data

  Hi, how can I get the highest value of data according to data acquired using the accelerometer ADXL345 and LINX in LabVIEW?

  I want the highest data to be shown with a flag. However, the data being shown are always the last acquired data. My problem would be what happens if the highest data somewhere at the beginning or in the middle of all the acquired data? How to display the highest data using an indicator?

  Here's a look at my front, block diagram, and sample of the acquired data.

  

  

  

  From the front panel, the basic indicator of detected last poster 0.1929 (amplitude), which is the last value. But looking at the Excel file, the highest data are data which is 0.2013. The highest, I want to be displayed on the indicator not the last value. How do I do that?

  Thank you!

  I gave you an example of what you need to do - it is not okay if wire you the new value and the old value for the X or Y - it will always return the maximum of the two values so the order doesn't matter. It would have been more useful if you had posted what you tried the max & min. You need a registry to offset inside the loop (like I did with my while loop). If you only want to display the maximum value for each iteration of the loop for external, you must initialize the shift register by plugging a 0 to its terminal on the left. A shift register her pinned the value of the last run - probably not what you want here.

• [Labview] I want to get the average value in each new 100 samples.

  Hello. I'm Sophie.

  I'm studying Labview for my research.

  For me, the sampling frequency is 125KHz.

  I want to get the average value in each new 100 samples.

  Therefore, I want to get an average value of 1 ~ 100th samples and store this average value. Call assets(1).

  Then, I want to get an average of 101 ~ 200th samples and store this means value, call moyen2.

  .

  .

  .

  .

  I don't know how me I want.

  Thank you

  Sophie.

  

• Get the current value of the variable when reaching CNVCreateSubscriber

  I use CNVCreateSubscriber () to create a subscription read to a network Variable: whenever the value of the variable changes, the DataCallback is called and I'm able to get the new value of the variable.

  But how to get the value of the variable when a subscription is created?

  I read in the help CNVCreateBufferedSubscriber () returns this information, but I wonder if using CNVGetDataFromBuffer () in a polling loop has the same performance as the approach to DataCallback of CNVCreateSubscriber ().

  In addition, the dataStatus (CNVGetDataFromBuffer) parameter is different for different Subscribers? (that is if I have multiple subscribers, CNVStaleData is related to the specific Subscriber or is a global property of the variable)?

  CNVData data;

  CNVGetConnectionAttribute (customer, CNVMostRecentDataAttribute, &data);)

• Get the default value for class LV 1498 error

  I call get the Default Value.vi LV class to dynamically load a class.

  It was working fine until I added Open Config Data.vi to read an .ini file.

  The application works fine when I press the button RUN in the LabView development environment, but when I create the executable file with Application Builder and then run it, I get:

  "1498 error occurred getting class LV Default Value.vi"

  Possible reasons:

  LabVIEW: Library has errors. Correct the errors before performing this operation.

  «"" "String of full appeal:»»"»

  Download LV class by default Value.vi

  Test.VI

  LabVIEW has tried to load the class in this path:

  g:\cal\devices\Digital300Meter\Digital300Meter.lvclass

  I narrowed the problem down to open Config Data.vi included in the application, not in the class. I don't have to call the Open Data of Config vi to get this error.

  I have a Subvi, called "SelectDevice" which refers to Open Data from Config. In my main Test.vi SelectDevice is in the true case of a true/false case structure, which is set to False.

  If I put a design schema off around the Open Data of Config vi, I do not get the error.

  I suspect that including Open Config Data include a VI in the application that interferes with the LV ranks by default.

  Thank you, it works!

  I also put the additional Exclusions page as follows:

  Disconnect the type definitions - verified

  Remove unused polymorphic instances of VI - verified

  Remove unused libraries project - members verified

  Change the project library file after removing unused members - unaudited

• How can I get the numeric value of a reference?

  I would like to get the numeric value of a reference.  If I look at any reference with a probe, I can see it has value, i.e. F280006B.  I would like to enter this value in a digital indicator for some troubleshooting I do. but running a Ref directly in a digital indicator introduced the code. Somehow the probe's work, it must be accessible. All advice out there?

  Type caster in U32.

  Lynn

  

• Get the current value of a control of the ring

  

  I have a control of the ring that has the following values. See attacment. I need to get the current value of this one and use it as input for another function, but First I would like to get the current value and save ina text file. I tried this

  if (event == EVENT_LEFT_CLICK_UP) || (event == EVENT_LEFT_CLICK_DOWN)
  {
      int p;
      GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p);
      FILE *OutFile = fopen("C:\\Users\\Student\\Desktop\\ringtest.txt","w");
      fprintf(OutFile,p);
      fclose(OutFile);
  
  }
  

  I need to get the current value of the ring (& p) to write to the file ringtest.txt.

  Also, I need to use this value (& p) as another entry in the same program.

  IE value of & p must be used in

  b = c * 5; where c is the value of the current & p.

  Can any 1 help?

  You're right: EVENT_LEFT_CLICK_DOWN is not a valid event for the CVI. Valid events are listed in the userint.h file, and are the only events that can be caught in the trap in a point of order. On the other hand, you're assuption on EVENT_VAL_CHANGED is correct: you can trap forget the EVENT_CLICK_UP event.

  According to the second question, looking at the definition for fprintf you must pass a string format as the second parameter to the function, then the value to write to the file. In your case, the correct syntax is:

  fprintf (OutFile, "%d", p);

• How to get the decimal value of a string of international currency

  Hi all

  How to get the decimal values to a string of international currency.

  Finally, we get to the real problem.

  You can use location functions or write your own using string functions already mentioned...

  http://developer.BlackBerry.com/native/documentation/Cascades/device_platform/internationalization/

• get the return value of a method of the application module in the workflow

  Hello

  I use jdeveloper 11.1.1.7.0

  I defined a method (return type is useful java card) in the Module of the Application and add this method to the client interface.

  also I have a workflow and in this TF firstly I should execute this method and put the return value for the pageFlowScope parameter. I know that to use this method as a methodCall and set it as an activity by default, but I don't know how to get the return value before entering the jsff page and set the pageFlowScope parameter.

  Habib

  Concerning

  When you add the activity to the way to deal, there are 'Return value' property that you can set to #{pageFlowScope.yourVariable}

  Dario

• When we try to create a shape with a predefined size above 10 x 10 inches of ps cs6, we get the next value in A message between 0.00 10.00 inches and thumb is necessary.  Close value inserted.

  When we try to create a shape with a predefined size above 10 x 10 inches of ps cs6, we get the next value in A message between 0.00 10.00 inches and thumb is necessary.  Close value inserted.

  You could put in your dimensions in the boxes of fixed size .

  Then just click on you document and move the object slightly before releasing the mouse if you don't get this pop up dialog box to create a Rectangle rounded.

  

• How do you get the numeric value of an image

  How do you get the numeric value of an image

  This in a small example

  var Red = ' \u00FF\u00D8\u00FF\u00E1\x05oExif\x00\x00MM\ '.

  
  

  
  

  Here is a link to a script open source that generates a string that represents the data of a file binary, especially useful to integrate a small image in a script or file patterns in a JSON structure, for example:

  Get the data from binary string

  HTH,

  Domestic-

• To get the old value and the new value

  create table test (ID NUMBER,
  Number of REV,
  Number FIELD_ID,
  FieldName varchar2 (200),
  ACTION varchar2 (50).
  Field_value varchar2 (200),
  MODIFIED_BY varchar2 (50).
  Date MODIFIED_DATE);
  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,290,12,'status','UPDATE','revision','2002',to_date('14-DEC-13','DD-MON-RR'));

  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,290,12,'status','UPDATE','teststat','2002',to_date('14-DEC-13','DD-MON-RR'));

  1007 283 12 status of started the UPDATE 2002 13 December 13
  1007 224 12 status update overview 2002 12 December 13
  12 290 1007 State review UPDATED 2002 December 14, 13
  1008 283 12 status of started the UPDATE 2002 13 December 13
  1008 224 12 status update overview 2002 12 December 13
  1008 290 12 intensified status 2002 Update December 14, 13

  I need to Get for each id for each field Ineed to get the old value and new_value.

  
  Planned result for the simulacrum of the data is:

  ID FIELD_NAME ACTION OLD_FIELD_VALUE NEW_FIELD_VALUE MODIFIED_BY MODIFIED_DATE
  1007 status UPDATE started review 2002 December 14, 13
  1008 State updated started intensified 2002 December 14, 13

  
  Thank you
  Ann

  Hello

  9728f65c-CE79-4c28-9efb-9e76dc6eaf8b wrote:

  Yes I need a production line for all id.the the last rows should be the one with the highest rev.

  Then use id where I guessed a group of columns starting with id and rev in most of the places where I used modifed_date:

  WITH got_analytics AS

  (

  SELECT id, field_name, action

  LAG (field_value) over (PARTITION BY ID.

  ORDER BY rev

  ) AS old_field_value

  field_value AS new_field_value

  modified_by

  modified_date

  rev

  MAX (rev) over (PARTITION BY id)

  AS max_rev

  OF the test

  )

  SELECT id, field_name, old_field_value, new_field_value, modified_by, modified_date

  OF got_analytics

  WHERE rev = max_rev

  ORDER BY id

  ;